[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Libreboot] Problems installing libreboot on C201
From: |
Albin |
Subject: |
Re: [Libreboot] Problems installing libreboot on C201 |
Date: |
Sat, 5 Dec 2015 15:25:40 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Icedove/38.4.0 |
Hi again,
Den 2015-12-05 kl. 13:27, skrev Paul Kocialkowski:
> Hi,
>
> Le samedi 05 décembre 2015 à 00:34 +0100, Albin a écrit :
>> I just found another guide
>> (https://gist.github.com/jcs/4bf59314d604538a5098) that mentions a step
>> that's missing on libreboot.org: besides removing the write-protect
>> screw one also has to run "flashrom --wp-disable". This should explain
>> the permissions issue I had.
>
> Can you confirm that this is the case (and that you were already using
> the root account for your first report)? I didn't have to go through
> this step when flashing, but maybe it is required the first time.
Yes, I was using the root account for the first report. Now I've also
tried to run the command "flashrom --wp-disable" which does output
"SUCCESS". That did NOT help though because, just as before, the command
"./cros-flash-replace flash.img coreboot ro-frid" results in: "bash:
./cros-flash-replace: Permission denied".
>
> Thanks!
Merci!
Albin
>
>> Den 2015-12-04 kl. 23:49, skrev Albin:
>>> Hi.
>>>
>>> Tonight I tried to install libreboot onto an ASOS C201. I ran into a
>>> number of difficulties that I managed to overcome (see the points below,
>>> my contribution to the docs), but then I got stuck at the point where
>>> one is to run the cros-flash-replace script. The terminal keeps
>>> returning PERMISSION DENIED. The file permissions, however, are the same
>>> as just after compilation and I've also removed The Screw as instructed.
>>>
>>> Does anyone have a clue what might be the problem?
>>>
>>> Cheers,
>>>
>>> Albin
>>>
>>>
>>> Errors found in the documentation:
>>>
>>> 1. There are *eight* screws that need to be removed to open the device,
>>> not seven. There is (at least on my device) one also beneath the top
>>> left pad.
>>>
>>> 2. You get into the TTY promt by pressing *Ctrl+Alt+Next*.
>>> *Ctrl+Alt+Previous* is for exiting the promt.
>>>
>>> 3. The guide mentions first "cros-flash-replace" and then
>>> "cros-firmware-replace":
>>>
>>> "Then, the cros-flash-replace script has to be executed as such:
>>> # ./cros-firmware-replace flash.img coreboot ro-frid"
>>>
>>> By the way, shouldn't there be .img extensions after coreboot and ro-frid?
>>>
>>
>
signature.asc
Description: OpenPGP digital signature
- [Libreboot] Problems installing libreboot on C201, Albin, 2015/12/04
- Re: [Libreboot] Problems installing libreboot on C201, Albin, 2015/12/04
- Re: [Libreboot] Problems installing libreboot on C201, Paul Kocialkowski, 2015/12/05
- Re: [Libreboot] Problems installing libreboot on C201, Paul Kocialkowski, 2015/12/06
- Re: [Libreboot] Problems installing libreboot on C201, Albin, 2015/12/06
- Re: [Libreboot] Problems installing libreboot on C201, Paul Kocialkowski, 2015/12/06
- Re: [Libreboot] Problems installing libreboot on C201, Albin, 2015/12/06
- Re: [Libreboot] Problems installing libreboot on C201, Albin, 2015/12/06
- [Libreboot] Parabola on C201, Albin, 2015/12/08
- Re: [Libreboot] Parabola on C201, Paul Kocialkowski, 2015/12/14
- Re: [Libreboot] Problems installing libreboot on C201, Paul Kocialkowski, 2015/12/14