[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
FYI: libtool--devo--1.0--patch-213
From: |
Gary V. Vaughan |
Subject: |
FYI: libtool--devo--1.0--patch-213 |
Date: |
Thu, 30 Sep 2004 16:14:19 +0100 (BST) |
User-agent: |
mailnotify/0.3 |
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Applied to HEAD.
- --
Gary V. Vaughan ())_. address@hidden,gnu.org}
Research Scientist ( '/ http://tkd.kicks-ass.net
GNU Hacker / )= http://www.gnu.org/software/libtool
Technical Author `(_~)_ http://sources.redhat.com/autobook
_________________________________________________________
This patch notification generated by tlaapply version 0.5
http://tkd.kicks-ass.net/arch/address@hidden/cvs-utils--tla--1.0
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Darwin)
iD8DBQFBXCLLFRMICSmD1gYRAjFMAKCyV6XuZQU9CtxA2ANrMSKJU1a5PwCgpXnh
0pBL/65S5obmHCX4inQxosM=
=2UuH
-----END PGP SIGNATURE-----
* looking for address@hidden/libtool--devo--1.0--patch-212 to compare with
* comparing to address@hidden/libtool--devo--1.0--patch-212
M ChangeLog
M m4/libtool.m4
* modified files
Index: Changelog
from Gary V. Vaughan <address@hidden>
* m4/libtool.m4 (echo): Use ECHO throughout for consistency with
config/ltmain.in.
Reported by Ralf Wildenhues <address@hidden>
2004-09-23 Ralf Wildenhues <address@hidden>
2004-09-15 Ralf Wildenhues <address@hidden>
2004-09-14 Ralf Wildenhues <address@hidden>
2004-09-12 Brad <address@hidden>
2004-08-03 Jacob Meuser <address@hidden>
2004-07-07 Brad <address@hidden>
--- orig/m4/libtool.m4
+++ mod/m4/libtool.m4
@@ -174,7 +174,7 @@
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+cc_basename=`$ECHO X"$compiler" | $Xsed -e 's%^.*/%%'`
# Only perform the check for file, if the check method requires it
test -z "$MAGIC_CMD" && MAGIC_CMD=file
@@ -349,7 +349,7 @@
# declaration there will have the same value as in `configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$echo "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
# _LT_CONFIG_STATUS_DECLARATIONS
@@ -359,7 +359,7 @@
# embedded single quotes properly. In configure, this macro expands
# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
#
-# <var>='`$echo "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
[m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
@@ -441,18 +441,18 @@
# Quote evaled strings.
for var in lt_decl_all_varnames([[ ]], lt_decl_quote_varnames); do
- eval "lt_\$var=\\\\\\"\\\`\\\$echo \\"X\\\$\$var\\" | \\\$Xsed -e
\\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e
\\"\\\$sed_quote_subst\\"\\\`\\\\\\""
done
# Double-quote double-evaled strings.
for var in lt_decl_all_varnames([[ ]], lt_decl_dquote_varnames); do
- eval "lt_\$var=\\\\\\"\\\`\\\$echo \\"X\\\$\$var\\" | \\\$Xsed -e
\\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e
\\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e
\\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e
\\"\\\$delay_variable_subst\\"\\\`\\\\\\""
done
# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_echo in
+case \$lt_ECHO in
*'\\\[$]0 --fallback-echo"')dnl "
- lt_echo=\`\$echo "X\$lt_echo" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0
--fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0
--fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
;;
esac
@@ -484,7 +484,7 @@
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building
support services.
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building
support services.
# Generated automatically by config.status (GNU $PACKAGE$TIMESTAMP) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
@@ -684,22 +684,22 @@
# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
-case X$ECHO in
+case $lt_ECHO in
X*--fallback-echo)
# Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
;;
esac
-echo=${ECHO-echo}
+ECHO=${ECHO-echo}
if test "X[$]1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test "X[$]1" = X--fallback-echo; then
# Avoid inline document here, it may be left over
:
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
+elif test "X`($ECHO '\t') 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $ECHO works!
:
else
# Restart under the correct shell.
@@ -720,117 +720,117 @@
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q
"[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
- echo_test_string="`eval $cmd`" &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q
"[$]0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+ echo_test_string="`eval $cmd`" &&
+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+ then
+ break
+ fi
+ done
+ fi
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
+ if test "X`($ECHO '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($ECHO "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+ else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$dir/echo"
+ break
+ fi
+ done
IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo
'\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo
"$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t')
2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo
"$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
+ if test "X$ECHO" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ ECHO='print -r'
+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
else
- # maybe with a smaller string...
- prev=:
+ # Try using printf.
+ ECHO='printf %s\n'
+ if test "X`($ECHO '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($ECHO "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0"
--fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0"
--fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t')
2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo
"$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q
"[$]0"' 'sed 50q "[$]0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q
"[$]0"' 'sed 50q "[$]0"'; do
+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
- if test "$prev" != 'sed 50q "[$]0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0"
${1+"[$]@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
+ if test "$prev" != 'sed 50q "[$]0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0"
${1+"[$]@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ ECHO=echo
+ fi
+ fi
fi
fi
fi
fi
-fi
# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
fi
-AC_SUBST(ECHO)
+AC_SUBST(lt_ECHO)
])
_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([ECHO], [echo], [1],
+_LT_DECL([], [ECHO], [1],
[An echo program that does not interpret backslashes])
])# _LT_PROG_ECHO_BACKSLASH
@@ -849,7 +849,7 @@
case $host in
ia64-*-hpux*)
# Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
+ $ECHO 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
@@ -864,7 +864,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ $ECHO '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
if test "$lt_cv_prog_gnu_ld" = yes; then
case `/usr/bin/file conftest.$ac_objext` in
@@ -897,7 +897,7 @@
x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
# Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
+ $ECHO 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
@@ -1014,7 +1014,7 @@
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
+ lt_compile=`$ECHO "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
@@ -1414,7 +1414,7 @@
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
+ lt_compile=`$ECHO "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
@@ -1601,14 +1601,14 @@
sys_lib_dlsearch_path_spec="/lib /usr/lib"
if test "$withGCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" |
$SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | $GREP ';' >/dev/null ; then
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';' >/dev/null ; then
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/
/g'`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e
's/;/ /g'`
else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e
"s/$PATH_SEPARATOR/ /g"`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e
"s/$PATH_SEPARATOR/ /g"`
fi
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
@@ -1647,9 +1647,9 @@
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[[01]] | aix4.[[01]].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ if { $ECHO '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ $ECHO ' yes '
+ $ECHO '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
@@ -1678,7 +1678,7 @@
if test "$host_cpu" = m68k; then
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do
libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`;
test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib
${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a ||
exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do
libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`;
test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib
${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a ||
exit 1; done'
else
dynamic_linker=no
fi
@@ -1715,11 +1715,11 @@
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo
\$dlname'\''`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;$ECHO
\$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
@@ -1727,34 +1727,34 @@
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} |
$SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`$ECHO ${libname} | sed -e 's/^lib/cyg/'``$ECHO ${release}
| $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
;;
mingw*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e
's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='${libname}`$ECHO ${release} | $SED -e
's/[[.]]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" |
$SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null];
then
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null];
then
# It is most probably a Windows format PATH printed by
# mingw gcc, but we are running on Cygwin. Gcc prints its search
# path with ; separators, and with drive letters. We can handle the
# drive letters (cygwin fileutils understands them), so leave them,
# especially as we might pass files found there to a mingw objdump,
# which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e
's/;/ /g'`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e
's/;/ /g'`
else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e
"s/$PATH_SEPARATOR/ /g"`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e
"s/$PATH_SEPARATOR/ /g"`
fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`$ECHO ${libname} | sed -e 's/^lib/pw/'``$ECHO
${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
;;
*)
- library_names_spec='${libname}`echo ${release} | $SED -e
's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='${libname}`$ECHO ${release} | $SED -e
's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
esac
dynamic_linker='Win32 ld.exe'
@@ -1771,7 +1771,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+ shrext_cmds='$(test .$module = .yes && $ECHO .so || $ECHO .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$withGCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n"
"$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | $GREP
"^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR,
,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -1807,7 +1807,7 @@
;;
freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+ objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || $ECHO aout`
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
@@ -1980,7 +1980,7 @@
version_type=sunos
need_lib_prefix=no
need_version=no
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ if $ECHO __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
@@ -2024,7 +2024,7 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`$ECHO __ELF__ | $CC -E - | $GREP __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case $host_os in
openbsd2.[[89]] | openbsd2.[[89]].*)
shlibpath_overrides_runpath=no
@@ -2282,9 +2282,9 @@
[[\\/]]* | ?:[[\\/]]*)
re_direlt='/[[^/]][[^/]]*/\.\./'
# Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | $GREP "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+ ac_prog=`$ECHO $ac_prog| $SED 's%\\\\%/%g'`
+ while $ECHO $ac_prog | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
@@ -2445,14 +2445,14 @@
;;
freebsd* | kfreebsd*-gnu)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ if $ECHO __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86
(compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ lt_cv_file_magic_test_file=`$ECHO /usr/lib/libc.so.*`
;;
esac
else
@@ -2498,7 +2498,7 @@
;;
netbsd* | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ if $ECHO __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern
/lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
@@ -2516,7 +2516,7 @@
;;
openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`$ECHO __ELF__ | $CC -E - | $GREP __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
lt_cv_deplibs_check_method='match_pattern
/lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern
/lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -2539,7 +2539,7 @@
case $host_vendor in
motorola)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB
(shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ lt_cv_file_magic_test_file=`$ECHO /usr/lib/libc.so*`
;;
ncr)
lt_cv_deplibs_check_method=pass_all
@@ -2743,7 +2743,7 @@
opt_cr=
case $build_os in
mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
@@ -3503,7 +3503,7 @@
amigaos*)
if test "$host_cpu" = m68k; then
- _LT_TAGVAR(archive_cmds, $1)='$RM
$output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" >
$output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >>
$output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >>
$output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >>
$output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd
$output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(archive_cmds, $1)='$RM
$output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" >
$output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >>
$output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >>
$output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >>
$output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd
$output_objdir && a2ixlibrary -32)'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
fi
@@ -3544,7 +3544,7 @@
_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q
$export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname.def;
else
- echo EXPORTS > $output_objdir/$soname.def;
+ $ECHO EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared $output_objdir/$soname.def $libobjs $deplibs
$compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000
${wl}--out-implib,$lib'
@@ -3554,7 +3554,7 @@
;;
netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ if $ECHO __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs
$linker_flags -o $lib'
wlarc=
else
@@ -3602,7 +3602,7 @@
*) supports_anon_versioning=yes ;;
esac
if test "x$supports_anon_versioning" = xyes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$output_objdir/$libname.ver~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >>
$output_objdir/$libname.ver~$echo "local: *; };" >>
$output_objdir/$libname.ver~$CC -shared $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver
-o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "{ global:" >
$output_objdir/$libname.ver~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >>
$output_objdir/$libname.ver~$ECHO "local: *; };" >>
$output_objdir/$libname.ver~$CC -shared $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver
-o $lib'
else
_LT_TAGVAR(archive_expsym_cmds, $1)=$_LT_TAGVAR(archive_cmds, $1)
fi
@@ -3741,7 +3741,7 @@
# empty executable.
_LT_SYS_MODULE_PATH_AIX
_LT_TAGVAR(hardcode_libdir_flag_spec,
$1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname
$libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test
"x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}";
else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname
$libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test
"x${allow_undefined_flag}" != "x"; then $ECHO "${wl}${allow_undefined_flag}";
else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R
$libdir:/usr/lib:/lib'
@@ -3769,7 +3769,7 @@
amigaos*)
if test "$host_cpu" = m68k; then
- _LT_TAGVAR(archive_cmds, $1)='$RM
$output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" >
$output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >>
$output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >>
$output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >>
$output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd
$output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(archive_cmds, $1)='$RM
$output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" >
$output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >>
$output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >>
$output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >>
$output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd
$output_objdir && a2ixlibrary -32)'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
fi
@@ -3793,7 +3793,7 @@
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
# FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo
"$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags
`$ECHO "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
# FIXME: Should let the user specify the lib program.
@@ -3825,7 +3825,7 @@
_LT_TAGVAR(whole_archive_flag_spec, $1)=''
_LT_TAGVAR(link_all_deplibs, $1)=yes
if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
+ output_verbose_link_cmd=echo
_LT_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o
$lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
_LT_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle
$libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
@@ -3834,8 +3834,8 @@
else
case "$cc_basename" in
xlc*)
- output_verbose_link_cmd='echo'
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo
$rpath/$soname` $verstring'
+ output_verbose_link_cmd=echo
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`$ECHO
$rpath/$soname` $verstring'
_LT_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it
doesn't exist in older darwin ld's
_LT_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name
${wl}$rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
@@ -3971,11 +3971,11 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo
${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo
${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o
$lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO
${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO
${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o
$lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${output_objdir}/so_locations -exports_file
$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags -soname $soname `test -n "$verstring" && $ECHO -set_version
$verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags -soname $soname `test -n "$verstring" && $ECHO -set_version
$verstring` -update_registry ${output_objdir}/so_locations -exports_file
$export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -3985,7 +3985,7 @@
;;
netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ if $ECHO __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs
$linker_flags' # a.out
else
_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs
$linker_flags' # ELF
@@ -4009,7 +4009,7 @@
openbsd*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`$ECHO __ELF__ | $CC -E - | $GREP __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs
$deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib
$libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
@@ -4032,17 +4032,17 @@
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" >
$output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >>
$output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo "
SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >>
$output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC
-Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags
$output_objdir/$libname.def'
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" >
$output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >>
$output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO "
SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >>
$output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC
-Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags
$output_objdir/$libname.def'
_LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o
$output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n
"$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n
"$verstring" && $ECHO ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && echo
-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" &&
$ECHO -set_version $verstring` -update_registry ${output_objdir}/so_locations
-o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -4052,13 +4052,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n
"$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n
"$verstring" && $ECHO ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring"
&& echo -set_version $verstring` -update_registry ${output_objdir}/so_locations
-o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do
printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">>
$lib.exp~
- $CC -shared${allow_undefined_flag} -input $lib.exp $compiler_flags
$libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${objdir}/so_locations -o $lib~$RM $lib.exp'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring"
&& $ECHO -set_version $verstring` -update_registry
${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do
printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; $ECHO "-hidden">>
$lib.exp~
+ $CC -shared${allow_undefined_flag} -input $lib.exp $compiler_flags
$libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO -set_version
$verstring` -update_registry ${objdir}/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -4079,18 +4079,18 @@
_LT_TAGVAR(no_undefined_flag, $1)=' -z text'
if test "$GCC" = yes; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib
$libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >>
$lib.exp~
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$ECHO "local: *; };" >>
$lib.exp~
$CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib
$libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
_LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h
$soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >>
$lib.exp~
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$ECHO "local: *; };" >>
$lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs
$deplibs $linker_flags~$RM $lib.exp'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h
$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >>
$lib.exp~
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$ECHO "local: *; };" >>
$lib.exp~
$CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs
$deplibs $compiler_flags~$RM $lib.exp'
;;
esac
@@ -4182,7 +4182,7 @@
# $CC -shared without GNU ld will not create a library from C++
# object files and a static libstdc++, better avoid it by now
_LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname
-o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >>
$lib.exp~
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$ECHO "local: *; };" >>
$lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib
$libobjs $deplibs $linker_flags~$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4388,7 +4388,7 @@
fi
if test -n "$_LT_TAGVAR(lt_prog_cc_shlib, $1)"; then
AC_MSG_WARN([`$CC' requires `$_LT_TAGVAR(lt_prog_cc_shlib, $1)' to build
shared libraries])
- if echo "$old_CC $old_CFLAGS " | $GREP "[[ ]]$_LT_TAGVAR(lt_prog_cc_shlib,
$1)[[ ]]" >/dev/null; then :
+ if $ECHO "$old_CC $old_CFLAGS " | $GREP "[[ ]]$_LT_TAGVAR(lt_prog_cc_shlib,
$1)[[ ]]" >/dev/null; then :
else
AC_MSG_WARN([add `$_LT_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS
env variable and reconfigure])
_LT_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
@@ -4522,7 +4522,7 @@
CC=${CXX-"c++"}
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
- cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+ cc_basename=`$ECHO X"$compiler" | $Xsed -e 's%^.*/%%'`
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
@@ -4679,7 +4679,7 @@
_LT_SYS_MODULE_PATH_AIX
_LT_TAGVAR(hardcode_libdir_flag_spec,
$1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o
$output_objdir/$soname $libobjs $deplibs $compiler_flags `if test
"x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}";
else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols
$shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o
$output_objdir/$soname $libobjs $deplibs $compiler_flags `if test
"x${allow_undefined_flag}" != "x"; then $ECHO "${wl}${allow_undefined_flag}";
else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols
$shared_flag"
else
if test "$host_cpu" = ia64; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R
$libdir:/usr/lib:/lib'
@@ -4729,7 +4729,7 @@
_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q
$export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname.def;
else
- echo EXPORTS > $output_objdir/$soname.def;
+ $ECHO EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared -nostdlib $output_objdir/$soname.def $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname
${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
@@ -4762,7 +4762,7 @@
if test "$GXX" = yes ; then
lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
+ output_verbose_link_cmd=echo
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[[0123]])
# only use -single_module on bona fide Apple compilers.
@@ -4793,8 +4793,8 @@
else
case "$cc_basename" in
xlc*)
- output_verbose_link_cmd='echo'
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags
${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+ output_verbose_link_cmd=echo
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags
${wl}-install_name ${wl}`$ECHO $rpath/$soname` $verstring'
_LT_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag,
# it doesn't exist in older darwin ld's
@@ -4869,7 +4869,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v
conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z
in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v
conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z
in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; $ECHO $list'
;;
*)
if test "$GXX" = yes; then
@@ -4941,7 +4941,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v
conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z
in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v
conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z
in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; $ECHO $list'
;;
*)
if test "$GXX" = yes; then
@@ -4967,7 +4967,7 @@
case $cc_basename in
CC)
# SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname
$soname `test -n "$verstring" && echo -set_version $verstring` -update_registry
${objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname
$soname `test -n "$verstring" && $ECHO -set_version $verstring`
-update_registry ${objdir}/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
@@ -4978,9 +4978,9 @@
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring`
${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && $ECHO ${wl}-set_version ${wl}$verstring`
${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring`
-o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && $ECHO ${wl}-set_version ${wl}$verstring`
-o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
@@ -4999,8 +4999,8 @@
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e
'\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e
"s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib
$lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext |
$SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED
-e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib
${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`$ECHO $shared_ext | $SED -e
'\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`$ECHO $lib | $SED -e
"s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib
$lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`$ECHO $shared_ext |
$SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`$ECHO $lib | $SED
-e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib
${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
@@ -5009,7 +5009,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext
-o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext;
list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";;
*.$objext);; *) list="$list $z";;esac; done; echo $list'
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext
-o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext;
list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";;
*.$objext);; *) list="$list $z";;esac; done; $ECHO $list'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5056,7 +5056,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v
conftest.$objext 2>&1 | $GREP "ld"`; templist=`echo $templist | $SED
"s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v
conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO $templist | $SED
"s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; $ECHO $list'
;;
esac
;;
@@ -5085,7 +5085,7 @@
;;
netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ if $ECHO __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib
$predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
@@ -5110,12 +5110,12 @@
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`$ECHO __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags
${wl}-retain-symbols-file,$export_symbols -o $lib'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
_LT_TAGVAR(whole_archive_flag_spec,
$1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
fi
- output_verbose_link_cmd='echo'
+ output_verbose_link_cmd=echo
;;
osf3* | osf4* | osf5*)
@@ -5126,7 +5126,7 @@
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e
'\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e
"s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib
$lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`$ECHO $shared_ext | $SED -e
'\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`$ECHO $lib | $SED -e
"s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib
$lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -5147,15 +5147,15 @@
case $host in
osf3*)
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC
-shared${allow_undefined_flag} $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" &&
echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o
$lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC
-shared${allow_undefined_flag} $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" &&
$ECHO ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o
$lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath
${wl}$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC
-shared${allow_undefined_flag} $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" &&
echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC
-shared${allow_undefined_flag} $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" &&
$ECHO -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat
$export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input
-Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring`
-update_registry $objdir/so_locations -o $lib~
+ $ECHO "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input
-Wl,$lib.exp `test -n "$verstring" && $ECHO -set_version $verstring`
-update_registry $objdir/so_locations -o $lib~
$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
@@ -5171,17 +5171,17 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v
conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`echo $templist
| $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case
$z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list
$z";;esac; done; echo $list'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v
conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO $templist
| $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case
$z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list
$z";;esac; done; $ECHO $list'
;;
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
case $host in
osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo
${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO
${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${objdir}/so_locations -o $lib'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" &&
echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" &&
$ECHO ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${objdir}/so_locations -o $lib'
;;
esac
@@ -5245,7 +5245,7 @@
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
_LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib
-h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo
"local: *; };" >> $lib.exp~
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$ECHO
"local: *; };" >> $lib.exp~
$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp
-h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags~$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
@@ -5261,7 +5261,7 @@
# cannot just pass the convience library names through
# without $wl.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z
${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}-z ${wl}defaultextract'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z
${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"`
${wl}-z ${wl}defaultextract'
;;
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
@@ -5274,7 +5274,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v
conftest.$objext 2>&1 | $GREP "\-[[LR]]"`; list=""; for z in $templist; do case
$z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list
$z";;esac; done; echo $list'
+ output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v
conftest.$objext 2>&1 | $GREP "\-[[LR]]"`; list=""; for z in $templist; do case
$z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list
$z";;esac; done; $ECHO $list'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@@ -5295,7 +5295,7 @@
_LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h
$wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo
"local: *; };" >> $lib.exp~
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$ECHO
"local: *; };" >> $lib.exp~
$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
@@ -5306,7 +5306,7 @@
# g++ 2.7 appears to require `-G' NOT `-shared' on this
# platform.
_LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h
$wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo
"local: *; };" >> $lib.exp~
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$ECHO
"local: *; };" >> $lib.exp~
$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
@@ -5448,7 +5448,7 @@
# The `*' in the case matches for architectures that use `case' in
# $output_verbose_cmd can trigger glob expansion during the loop
# eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e
"$no_glob_subst"`
+ output_verbose_link_cmd=`$ECHO "X$output_verbose_link_cmd" | $Xsed -e
"$no_glob_subst"`
for p in `eval $output_verbose_link_cmd`; do
case $p in
@@ -5519,7 +5519,7 @@
# Clean up.
rm -f a.out a.exe
else
- echo "libtool.m4: error: problem compiling $1 test program"
+ $ECHO "libtool.m4: error: problem compiling $1 test program"
fi
$RM -f confest.$objext
@@ -5593,7 +5593,7 @@
CC=${F77-"f77"}
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
- cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+ cc_basename=`$ECHO X"$compiler" | $Xsed -e 's%^.*/%%'`
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
@@ -5834,7 +5834,7 @@
test ! -f $lt_ac_sed && break
cat /dev/null > conftest.in
lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ $ECHO $ECHO_N "0123456789$ECHO_C" >conftest.in
# Check for GNU sed and select it if it is found.
if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
lt_cv_path_SED=$lt_ac_sed
@@ -5844,7 +5844,7 @@
cat conftest.in conftest.in >conftest.tmp
mv conftest.tmp conftest.in
cp conftest.in conftest.nl
- echo >>conftest.nl
+ $ECHO >>conftest.nl
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- FYI: libtool--devo--1.0--patch-213,
Gary V. Vaughan <=