labels: --> Fixed_2_21_0
status: Started --> Fixed
Patch: push -->

[issues:#5806] Tweak mf files to avoid FontForge internal overlap error

Status: Fixed
Labels: Fixed_2_21_0
Created: Fri Feb 28, 2020 07:57 PM UTC by Torsten Hämmerle
Last Updated: Thu Mar 05, 2020 11:14 AM UTC
Owner: Torsten Hämmerle
Attachments:

feta-alphabet11.pfb (12.6 kB; application/x-font-type1)
feta-braces-a.pfb (24.8 kB; application/x-font-type1)
feta11.pfb (53.8 kB; application/x-font-type1)
internal-error-overlap-log.txt (41.5 kB; text/plain)
parmesan11.pfb (39.4 kB; application/x-font-type1)

https://codereview.appspot.com/571780043

Overlapping mf paths

In some cases, overlapping mf paths will cause errors in FontForge processing, even if the resulting glyphs seem to be OK.
Currently, we have 352 error messages being produced during make, which is quite annoying..
Please find the corresponding log extract attached.

Remedy: Slightly adapt mf code (where needed), keeping the resulting glyph outline unchanged, but avoid problematic crossing angles for FontForge.
slight path adaptions inside overlapping areas (not affecting the resulting glyph outline at all!)
In some cases (braces, arowheads, segno/turns) now using one single outline rather than combinng two overlapping ones (with the exact same result).

FontForge issue

This has been a pain in the neck for many years now, but it doesn't seem to be easy to fix in FontForge, though. Werner has created a (FontForge) issue: https://github.com/fontforge/fontforge/issues/4184.

Nevertheless, it'd probably be a good idea to make our mf files a bit easier to handle.

Changes to mf files

The mf files have only been changed where needed, using all the original mf control points and directions, keeping the resulting character outline unaltered.
I'll attach PFB files of feta11.pfb and feta.braces-a.pfb so that Werner (and others, of course) can have a look at the final FontForge output.

Overview: Internal Error (overlap) in [...]

The errors are being caused by just a few glyphs in just a couple of mf files. Most of the time, there fixing one macro will fix all the glyphs using that macro.

feta-arrowheads.mf -> Internal Error (overlap) in arrowheads.*

macro set_arrow_path: now one single outline. Fixes glyphs open.01, open.0M1, open.11, open.1M1

feta-numbers.mf -> Internal Error (overlap) in two, seven

Character defintions "two" and "seven" chnged. Fixes glyphs two, seven

feta-scripts.mf -> Internal Error (overlap) in scripts.*

macro draw_turn: "ploops" removed, now one single outline. Fixes glyphs reverseturn, turn, slashturn
char def "segno": similar case as in draw_turn. Fixes glyph segno

feta-timesignatures.mf -> Internal Error (overlap) in timesig.*

macro draw_C: smooth .. instead of straight -- within overlapping area. Fixes glyphs C44, C22

feta-clefs.mf -> Internal Error (overlap) in clefs.*

macro draw_gclef: Fixes glyphs G, GG, tenorG
macro draw_tab_B: Starting angle of one stroke in lower handwriting style "B" of "TAB" slightly changed (invisible difference). Fixes glyph tab

feta-braces.mf -> Internal Error (overlap) in brace*

macro draw_brace: Even simplified a bit and now drawing one single outline without any overlaps.

parmesan-clefs.mf -> Internal Error (overlap) in clefs.*

macro draw_neomensural_c_clef: Fixes glyphs neomensural.c, neomensural.c_change
macro draw_petrucci_c_clef: Fixes glyphs petrucci.c1, c2, c2_change, c3, c3_change, c4, c5, c5_change

parmesan-rests.mf -> Internal Error (overlap) in rests.*

char def "2neomensural" changed: Fixes glyph rests.2neomensural

Examle: two overlaping outline -> single outline

In many symmetric cases, such as arrowheads braces, the glyphs had been constructed by separately drawing half and a mirrored version of itself, thus creating an overlap that might be problematic for FontForge.

Original mf code (with overlap)

   fill path;
   fill path yscaled -1;

New mf code (one single outline)
After determining the intersection point and using the appropriate subpath only, we are able to draw one single cyclic outine by joining one half part and its reversed/mirrored counterpart:
Using subpaths helps keeping the exact original control points and slopes, thus keeping the resulting glyph exactly identical to the original glyph..

   fill path
      .. reverse path yscaled -1
      .. cycle;

Sent from sourceforge.net because address@hidden is subscribed to https://sourceforge.net/p/testlilyissues/issues/

To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/testlilyissues/admin/issues/options. Or, if this is a mailing list, you can unsubscribe from the mailing list.

From:	Auto mailings of changes to Lily Issues via Testlilyissues-auto
Subject:	[Lilypond-auto] [LilyIssues-auto] [testlilyissues:issues] #5806 Tweak mf files to avoid FontForge internal overlap error
Date:	Thu, 05 Mar 2020 17:31:49 -0000

[Lilypond-auto] [LilyIssues-auto] [testlilyissues:issues] #5806 Tweak mf