[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Add tab-tie-follow-engraver (issue2723043)
From: |
n . puttock |
Subject: |
Re: Add tab-tie-follow-engraver (issue2723043) |
Date: |
Sun, 31 Oct 2010 22:51:39 +0000 |
On 2010/10/31 22:40:57, Carl wrote:
This is going away, so it won't apply to this patch (because we don't
need to
acknowledge glissandos). But if we did, and we added a
glissando-interface,
then instead of Tab_tie_follow_engraver::acknowledge_line_spanner
wouldn't we
just use
Tab_tie_follow_engraver::acknowledge_glissando?
Yes.
But it would seem strange to me to add an interface with no properties
that can
be set,
which is what I think I'd be doing if I added a glissando_interface.
Any
comment on this thought?
If you look in define-grob-interfaces.scm, you'll see several interfaces
with no properties: most of them exist just to allow engravers to
distinguish between grobs which would normally be lumped together (e.g.,
acknowledging line-spanner-interface, when you really want something
more specific).
Cheers,
Neil
http://codereview.appspot.com/2723043/
- Add tab-tie-follow-engraver (issue2723043), Carl . D . Sorensen, 2010/10/30
- Re: Add tab-tie-follow-engraver (issue2723043), marc, 2010/10/31
- Re: Add tab-tie-follow-engraver (issue2723043), tdanielsmusic, 2010/10/31
- Re: Add tab-tie-follow-engraver (issue2723043), Carl . D . Sorensen, 2010/10/31
- Re: Add tab-tie-follow-engraver (issue2723043), Carl . D . Sorensen, 2010/10/31
- Re: Add tab-tie-follow-engraver (issue2723043), n . puttock, 2010/10/31
- Re: Add tab-tie-follow-engraver (issue2723043), Carl . D . Sorensen, 2010/10/31
- Re: Add tab-tie-follow-engraver (issue2723043), Carl . D . Sorensen, 2010/10/31
- Re: Add tab-tie-follow-engraver (issue2723043),
n . puttock <=
- Re: Add tab-tie-follow-engraver (issue2723043), Carl . D . Sorensen, 2010/10/31
- Re: Add tab-tie-follow-engraver (issue2723043), Carl . D . Sorensen, 2010/10/31
- Re: Add tab-tie-follow-engraver (issue2723043), Carl . D . Sorensen, 2010/10/31