[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at ./ltib line599.
From: |
Stuart Hughes |
Subject: |
RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at ./ltib line599. |
Date: |
Fri, 08 Dec 2006 16:56:25 +0000 |
Hi Vin,
See my earlier email too. Steve is right, you'll need a new spec file
to build this. What Steve meant with respect to gcc-3.4.3 is that
currently that is the common version for builds of gcc to run on the
target. The host based cross compiler is gcc-4.1.1 (as you've probably
figured from the config).
I don't mean to second guess you, but are you sure you need to do this?
what do you need to natively build?
Regards, Stuart
On Fri, 2006-12-08 at 11:02 -0500, Sesto, Vin wrote:
> Hi Stuart
>
> The latest CVS did build for me. Now I should attempt to build gcc.
> Although I seek gcc 4.1.1 Steve P alluded to the fact that the ltib
> bundles only 3.4.3. I would like to know how to natively build 4.1.1.
>
> Thanks.
>
> Vin
>
>
> -----Original Message-----
> From: Stuart Hughes [mailto:address@hidden
> Sent: Friday, December 08, 2006 6:03 AM
> To: Sesto, Vin
> Cc: address@hidden
> Subject: Re: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at ./ltib
> line599.
>
> Hi Vin,
>
> This patch got pushed out today, so it's now available. If you try
> again the kernel should build.
>
> Why do you need to build gcc-4.1.1? there is a toolchain already
> available for this BSP ("ARM gcc-4.1.1,VFP,gnueabi/glibc-2.4-nptl-3"),
> and it has had some testing.
>
> Regards, Stuart
>
> On Thu, 2006-12-07 at 10:12 -0500, Sesto, Vin wrote:
> > Hello
> >
> >
> >
> > I have just updated my LTIB from CVS and got this error.
> >
> >
> >
> > Can?t get: linux-2.6.16-mx31-sdio.patch at ./ltib line 599.
> >
> >
> >
> > I am trying to build for an MX31 with eabi / nptl support.
> >
> >
> >
> > I need to be able to build gcc 4.1.1 for this target, however, I can?t
> > even build without making any changes before even attempting that
> > feat!
> >
> >
> >
> > Thanks.
> >
> >
> >
> > V
> >
> >
> > _______________________________________________
> > LTIB home page: http://bitshrine.org
> >
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
>
- RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at./ltibline599., (continued)
- RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at./ltibline599., Stuart Hughes, 2006/12/11
- RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at./ltibline599., Steve Papacharalambous, 2006/12/11
- RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at./ltibline599., Sesto, Vin, 2006/12/11
- RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at./ltibline599., Steve Papacharalambous, 2006/12/11
- RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at./ltibline599., Steve Papacharalambous, 2006/12/12
- RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at./ltibline599., Sesto, Vin, 2006/12/12
- RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at./ltibline599., Steve Papacharalambous, 2006/12/12
- RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at./ltibline599., Stuart Hughes, 2006/12/12
- RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at ./ltib line599., Stuart Hughes, 2006/12/08
RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at ./ltib line599., Sesto, Vin, 2006/12/08
- RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at ./ltib line599.,
Stuart Hughes <=