Re: [Ltib] Porting asterisk to ltib

[Stuart Hughes]

Hi Vadim,

I've finished integrating asterisk/zaptel.  I've uploaded to the PPP and
commited to Savannah CVS.  The only significant change I made was to the
way the device files are made for zaptel when using rpm.  rpm has a
"magic" file format that lets you describe those files.  This allows you
to make the device nodes inside the binary rpm without the need for root
access.

Please take a look and let me know if any problems.  

BTW: I'll be away until 11th August now (no email access).

Regards, Stuart

On Fri, 2008-08-01 at 13:27 +0200, Vadim Lebedev wrote:
> Hi
> 
> before comipiling zaptel i'm configuring it
> to build only ztdummy  driver so makefw is not compiled
> 
> 
> Thanks
>  Vadim
> 
> Stuart Hughes wrote: 
> > Hi Vadim,
> > 
> > I took a look at integrating and have all the pieces in place.
> > 
> > I tried selecting/building this for the current imx31 setup on Savannah
> > CVS and I'm seeing this failure for zaptel:
> > 
> > make -C /home/seh/ltib_bsps/savannah_ltib/rpm/BUILD/linux ARCH=arm 
> > SUBDIRS=/home/seh/ltib_bsps/savannah_ltib/rpm/BUILD/zaptel-1.4.11/kernel 
> > HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="pciradio.o tor2.o torisa.o wcfxo.o 
> > wct1xxp.o wctdm.o wcte11xp.o wcusb.o zaptel.o ztd-eth.o ztd-loc.o ztdummy.o 
> > ztdynamic.o zttranscode.o wct4xxp/ wctc4xxp/ xpp/ wctdm24xxp/ wcte12xp/" 
> > modules
> > make[2]: Entering directory 
> > `/home/seh/ltib_bsps/savannah_ltib/rpm/BUILD/linux-2.6.22'
> > /usr/bin/gcc -o 
> > /home/seh/ltib_bsps/savannah_ltib/rpm/BUILD/zaptel-1.4.11/kernel/makefw 
> > /home/seh/ltib_bsps/savannah_ltib/rpm/BUILD/zaptel-1.4.11/kernel/makefw.c
> > arm-none-linux-gnueabi-as: unrecognized option `-Qy'
> > make[3]: *** 
> > [/home/seh/ltib_bsps/savannah_ltib/rpm/BUILD/zaptel-1.4.11/kernel/makefw] 
> > Error 1
> > 
> > I can also see that configure had a similar problem if I look at
> > config.log for menuselect.
> > 
> > I can't see anywhere obvious where this flag is getting injected.  Any
> > ideas?
> > 
> > Regards, Stuart
> > 
> >   
> 
> 
> > On Tue, 2008-07-22 at 09:51 +0100, Stuart Hughes wrote:
> >   
> > > Hi Vadim,
> > > 
> > > Thanks for the tarball.  I will integrate this when I get a chance (it
> > > may be a little while as I'm maxed out on other work right now).
> > > 
> > > Could you send me the URLs for the base zaptel and asterisk tarballs.
> > > 
> > > Also I'd like to rename: asterisk-1.4.21.1-1216656125.patch and
> > > zaptel-1.4.11-1216295931.patch to something more informative.  Can you
> > > suggest a name for each (maybe it's just xxxx-cross.patch ?)
> > > 
> > > Regards, Stuart
> > > 
> > > On Mon, 2008-07-21 at 18:29 +0200, Vadim Lebedev wrote:
> > >     
> > > > Hello,
> > > > 
> > > > I'm attaching the .tar.gz with the results of my work to intgrate 
> > > > asterisk to ltib...
> > > > 
> > > > This builds, but as i don't have an actual board for the moment i'm 
> > > > unable to test...
> > > > 
> > > > 
> > > > Thanks to to everybody who helped me...
> > > > 
> > > > 
> > > > Thanks
> > > > Vadim
> > > >