Re: [Ltib] Changes to the kernel drivers...

[Stuart Hughes]

Hi Pablo,

Did you see it say 'processing kernel...' and it build your changes?
If so make sure you copied rootfs/boot/_kernel_ to your tftp area.

If not try, ./ltib -p kernel and see if it enters the directory and attempts a build.
This may be required if you're running and old LTIB.

Regards, Stuart

On Wed, 2009-03-04 at 17:28 +0100, Pablo Godoy wrote:
>     
>     Hi everybody,
>     
>     I make some changes to the driver rpm/BUILD/driver/I2c-dev.c but
>     
>     when I do
>     
>     ./ltib 
>     
>     ...to rebuild to kernel and deploy it...and then I reinstall the image in my target (MC5484) using tftp, I reboot with the new
>     
>     kernel but the system doesn't seems to take in count the changes I have made (I have used printk to debug the kernel, but doesn't seems to access the new version of the driver).
>     
>     Which is strange because if I put an error in i2c-dev.c the ./ltib stopped before reconfigure the kernel pointing a build error for this driver?!?!?   
>     
>     Thank you very much.
>     
>     
>     
>     Pablo Godoy Fuentes 
>     Ingénieur R&D 
>     macq électronique 
>     Rue de l'Aéronef 2 
>     Tel: 02/702 90 62 
>     Fax: 02/702 90 77 
>     address@hidden
>     
>     
>     
> _______________________________________________
> LTIB home page: http://bitshrine.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib