Re: [Ltib] ltib

[Stuart Hughes]

Hi Tarek,

Rather than send attachments (which are marked binary) please cut and 
paste the relevant section, which in this case is this:

+ [ XTOOL = CSL -a -d 
/opt/freescale/usr/local/gcc-4.1.78-eglibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin/powerpc-e300c3-linux-gnu-gcc/powerpc-e300c3-linux-gnu/include/c++ 
]
+ [ XTOOL = UCLIBC-SYSROOT ]
+ i=
+ cp -a 
/opt/freescale/usr/local/gcc-4.1.78-eglibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin/powerpc-e300c3-linux-gnu-gcc//include/c++ 
/home/allaoua/mpc5121/ltib/tmp/base_libs//opt/freescale/rootfs/ppc/usr/include
cp: cannot stat 
`/opt/freescale/usr/local/gcc-4.1.78-eglibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin/powerpc-e300c3-linux-gnu-gcc//include/c++': 
Not a directory
error: Bad exit status from /home/allaoua/mpc5121/ltib/tmp/rpm-tmp.72706 
(%install)

Also:

1/ Please tell me which host distro you're running on.

2/ Confirm whether you're using the latest Savannah CVS.

Finally:

3/ Please don't hijack threads.  This is a new topic, so you should 
click on "Compose", or "New Message".  Also, please use a meaningful 
subject line, 'ltib' is not that helpful.

Regards, Stuart


tarek allaoua wrote:
> Hi again,
> I've installed freescale BSP first and trying to install cvs version (it 
> looks interesting, the last time i've used it it didn't contain mpc51xx 
> support), please take a look to the install log.
>
> 2009/4/30 tarek allaoua <address@hidden 
> <mailto:address@hidden>>
>
>     Thank you Stuart for the detailed explanation.
>
>     Tarek
>
>     2009/4/30 Stuart Hughes <address@hidden <mailto:address@hidden>>
>
>         Hi Tarek,
>
>         Broadly speaking the answer is yes you can have multiple
>         versions of LTIB on the same machine.