Hi Dimitri,
There seems to be an issue when u-boot does a saveenv() after booting from
FLASH.
We'll look at it and fix it in the next u-boot patch, but for now, just use SD
boot
and leave the card in the system.
S1l autoboot setup for u-boot.bin form the SD card is..
"aboot blk u-boot.bin raw 0x83fc0000"
thanks,
Kevin
-----Original Message-----
From: address@hidden [mailto:ltib-
address@hidden On Behalf Of Dmitry Vinokurov
Sent: Monday, July 27, 2009 10:23 PM
To: address@hidden
Subject: [Ltib] LPC3250: u-boot hangs
Hello,
I installed u-boot from SD card on RDK LPC3250 as it described in
"Phytec LPC3250 QuickStart BSP Linux":
/*
linux>load blk u-boot.bin raw 0x83fc0000
File loaded successfully
linux>nsave
linux>aboot flash raw 0x83fc0000
Autoboot configuration updated
*/
Then if I enter boot command everything is fine, u-boot works.
But after reboot I get following output:
/*
Phytec LPC3250 board
Build date: Oct 29 2008 15:42:39
Autoboot in progress, press any key to stop
U-Boot 2009.03-rc1 (Jul 14 2009 - 10:32:03)
DRAM: 64 MB
NAND: 64 MiB
*/
Then board hangs without any messages.
Any ideas?
Thanks in advance.
P.S.: last cvs version of LTIB and u-boot 2009.03-rc1.
--
Best Regards,
Dmitry Vinokurov
<address@hidden>
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/ltib