[Ltib] Re: Qtopia build on Ubuntu ver 9.04 finally succeeded

[Stuart Hughes]

Hi Rajesh,

Do you recall what X11 packages you needed to install?  maybe these need 
to be added as dependencies of qtopia.

Regards, Stuart

address@hidden wrote:
> Hi,
>
> I was able to finally get the build to succeed with latest from CVS. In
> fact, I had to install a set of packages including X11 dependencies to get
> the install going.
>
> regards,
> Rajesh Marathe.
>
>
>
> > Hi Stuart,
> >
> > I am building this for imx27ads platform.
> >
> > I am not doing any specific configuration as I have just started to work
> > on this kit + ltib. I just select the target platform as imx27 and that's
> > it as part of configuration. Rest is all default and I assume this should
> > be okay. I also saw that QT package inclusion is by default and seems to
> > be a MUST.
> >
> > I ran the command ./ltib.
> >
> > I have attached the output file "out3" along with this email.
> >
> > It seems qtopia tools are not built, so do I have to set something in
> > configuration to get this build beforehand ?
> >
> > regards,
> > Rajesh Marathe.
> >
> >
> >
> >
> > > Hi Rajesh,
> > >
> > > Which platform are you building? I ran build regressions on imx31ads,
> > > mpc5200, mpc8349itx and mpc8548cds which built okay.
> > >
> > > You've chopped the start of the errors so it's hard to say what the
> > > initial trigger was.  As you say maybe it's missing a dependency which I
> > > have configured in.
> > >
> > > Please say: what command did you run? (./ltib or ./ltib -p qtopia), did
> > > you reconfigure? etc.
> > >
> > > Can you send your config/platform/_target_/.config file so I can see
> > > your configuration.
> > >
> > > Regards, Stuart
> > >
> > > address@hidden wrote:
> > > > Hi Stuart,
> > > >
> > > > I took the latest from CVS (With today's patch from Daniel) and still I
> > > > see
> > > > some errors while building Qtopia tools.
> > > > The errors are like:
> > > > -------------------------------------------------------------------------
> > > > rdparty/kernel/qmotifdnd_x11.cpp:825: error: 'cur_window' was not
> > > > declared
> > > > in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:826: error: 'cm' was not declared in
> > > > this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:829: error: 'False' was not declared
> > > > in
> > > > this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:830: error: 'XSendEvent' was not
> > > > declared in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:836: error: 'False' was not declared
> > > > in
> > > > this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:839: error: 'struct DndData' has no
> > > > member named 'time'
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:839: error: 'CurrentTime' was not
> > > > declared in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:842: error: 'cur_window' was not
> > > > declared in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:843: error: 'cm' was not declared in
> > > > this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:847: error: 'XSendEvent' was not
> > > > declared in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:860: error: 'cur_window' was not
> > > > declared in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:860: error: 'struct DndData' has no
> > > > member named 'src_window'
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:866: error: 'struct DndData' has no
> > > > member named 'property'
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:867: error: 'src_targets' was not
> > > > declared in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:881: error: 'struct DndData' has no
> > > > member named 'property'
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:881: error: 'Dnd_transfer_failure'
> > > > was
> > > > not declared in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:882: error: 'struct DndData' has no
> > > > member named 'property'
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:882: error: 'struct DndData' has no
> > > > member named 'time'
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:882: error: 'XConvertSelection' was
> > > > not
> > > > declared in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:894: error: 'cm' was not declared in
> > > > this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:897: error: 'False' was not declared
> > > > in
> > > > this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:898: error: 'XSendEvent' was not
> > > > declared in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:901: error: 'Dnd_selection' was not
> > > > declared in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:901: error: 'struct DndData' has no
> > > > member named 'property'
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:902: error: 'Dnd_selection_time' was
> > > > not
> > > > declared in this scope
> > > > 3rdparty/kernel/qmotifdnd_x11.cpp:902: error: 'struct DndData' has no
> > > > member named 'time'
> > > > make[1]: ***
> > > > [tmp/release-shared-linux-g++/3rdparty/kernel/qmotifdnd_x11.o] Error 1
> > > > make[1]: Leaving directory
> > > > `/home/rmarathe/myltib/cvsltib/ltib/rpm/BUILD/qtopia-free-2.2.0/qt2/src'
> > > > *
> > > > ---------------------------------------------------------------------------
> > > > *
> > > > *               ERROR: Building Qtopia Tools has failed.
> > > > *
> > > >
> > > > --------------------------------------------------------------------------
> > > >
> > > > and more errors follow. It seems the X11 related files are not
> > > > installed
> > > > in my version of Ubuntu Linux. Any clue ?
> > > >
> > > > regards,
> > > > Rajesh Marathe.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > Hi Daniel,
> > > > >
> > > > > I stripped the \r characters and added a brief description to the
> > > > > patch
> > > > > and uploaded it to the GPP (added a -1 to the filename).  I've updated
> > > > > the qtopia.spec file and checked into CVS.
> > > > >
> > > > > Thanks again for the patch.
> > > > >
> > > > > Regards, Stuart
> > > > >
> > > > > Stuart Hughes wrote:
> > > > > > Hi Daniel,
> > > > > >
> > > > > > Thanks I'll take a look and apply accordingly to CVS.
> > > > > >
> > > > > > Regards, Stuart
> > > > > >
> > > > > > Daniel Widyanto wrote:
> > > > > > > Hi Stuart,
> > > > > > >
> > > > > > > Thanks a lot. Sorry if I cannot help much. The patch was based on
> > > > > > > what
> > > > > > > we had created to demonstrate our LPC3250 GUI capabilities on Linux
> > > > > > > for a customer.
> > > > > > > Another thing that we found was that the latest GLIBC fingerprint
> > > > > > > for
> > > > > > > open() has changed. Hence it would break the Qtopia compilation.
> > > > > > > Also,
> > > > > > > there's a qtopia's tool, called pngscale, which suppose to run on
> > > > > > > host, but linked to arm library instead.
> > > > > > > Attached is the patch to fix those problems. I'm not sure how to
> > > > > > > integrate it to LTIB package. Sorry. I should spend time with LTIB
> > > > > > > more often =)
> > > > > > >
> > > > > > > Regards,
> > > > > > > -daniel
> > > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Stuart Hughes [mailto:address@hidden Sent: Tuesday, August 25,
> > > > > > > 2009 4:22 PM
> > > > > > > To: Daniel Widyanto
> > > > > > > Cc: address@hidden
> > > > > > > Subject: Re: [Ltib] qtopia package build failure while building ltib
> > > > > > > from CVS (Savannah)
> > > > > > >
> > > > > > > Hi Daniel,
> > > > > > >
> > > > > > > I re-worked and build-tested your patch (imx27) and have checked it
> > > > > > > in
> > > > > > > to Savannah CVS.  Let me know if you think it needs any adjustments.
> > > > > > > I've attached the patch/diff so you can see what changed.
> > > > > > >
> > > > > > > Regards, Stuart
> > > > > > _______________________________________________
> > > > > > LTIB home page: http://ltib.org
> > > > > >
> > > > > > Ltib mailing list
> > > > > > address@hidden
> > > > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > > > _______________________________________________
> > > > > LTIB home page: http://ltib.org
> > > > >
> > > > > Ltib mailing list
> > > > > address@hidden
> > > > > http://lists.nongnu.org/mailman/listinfo/ltib