Hi Kevin,
Just as a quick sanity check, try reinstalling LTIB (in another
directory) via CVS and performing
a default phy3250 build from scratch in that directory.
If it builds ok, post a diff of the changed files. If not, maybe
something has changed on the
host machine? A quick check of a clean build with an updated
Ubuntu 9.10 machine had no
problems.
thanks,
Kevin
Hello-
I am having a HUGE problem with LTIB. I have been using LTIB on ubuntu with
sourcerygxx-ide for several months now. My target is the LPC3250. I was working
yesterday and after making my second set of changes to my application, and then
trying to build LTIB I started getting the following errors:
address@hidden:~/ltib$ ./ltib --config
+ [ -n ]
+ [ ! -f config/platform/phy3250/.config -a -f
config/platform/phy3250/defconfig ]
+ [ -f /home/kevins/ltib/config/.config ]
+ [ -n ]
+ cd config/platform/phy3250
+ mconf main.lkc .config
../../userspace/packages.lkc:3379:warning: enable is only allowed with boolean
and tristate symbols
*** End of configuration.
*** Check the top-level Makefile for additional configuration options.
+ cp .config defconfig.dev
Processing platform: Phytec 3250 board with the NXP LPC32XX SoC
=================================================================
using config/platform/phy3250/.config
Processing: fake-provides
===========================
Processing: kernel-2.6.27.8-lpc32xx
Build path taken because: no prebuilt rpm,
rpmbuild --dbpath /home/kevins/ltib/rootfs//var/lib/rpm --target arm --define
'_unpackaged_files_terminate_build 0' --define '_target_cpu arm' --define
'__strip strip' --define '_topdir /home/kevins/ltib/rpm' --define '_prefix
/usr' --define '_tmppath /home/kevins/ltib/tmp' --define '_rpmdir
/home/kevins/ltib/rpm/RPMS' --define '_mandir /usr/share/man' --define
'_sysconfdir /etc' --define '_localstatedir /var' -bb /home/kevins/ltib/rpm/SPECS/kernel-2.6.27.8-lpc32xx.spec
Building target platforms: arm
Building for target arm
Executing(%prep): /bin/sh -e /home/kevins/ltib/tmp/rpm-tmp.96597
+ umask 022
+ cd /home/kevins/ltib/rpm/BUILD
+ exit 0
Executing(%build): /bin/sh -e /home/kevins/ltib/tmp/rpm-tmp.96597
+ umask 022
+ cd /home/kevins/ltib/rpm/BUILD
+ exit 0
Executing(%install): /bin/sh -e /home/kevins/ltib/tmp/rpm-tmp.96597
+ umask 022
+ cd /home/kevins/ltib/rpm/BUILD
Processing files: kernel-2.6.27.8-1
error: File not found by glob: /home/kevins/ltib/tmp/kernel/opt/nxp/rootfs/arm/*
RPM build errors:
File not found by glob:
/home/kevins/ltib/tmp/kernel/opt/nxp/rootfs/arm/*
Build time for kernel-2.6.27.8-lpc32xx: 0 seconds
Failed building kernel-2.6.27.8-lpc32xx
f_buildrpms() returned an error, exiting
traceback:
main:555
Started: Fri Feb 19 07:49:46 2010
Ended: Fri Feb 19 07:49:52 2010
Elapsed: 6 seconds
These packages failed to build:
kernel-2.6.27.8-lpc32xx
Build Failed
Exiting on error or interrupt
address@hidden:~/ltib$
Help!! I can not figure out what happened, and I literally did not change
anything. I did 2 builds 10 minutes apart, the first build worked no problem,
and the second gave me these errors. Now I continually get these errors and can
not get it to build.
Thanks in advance for your help.
Kevin Slattery