Re: [Ltib] spec file pulling from CVS

[Andrea Galbusera]

Hi Stuart,

On Wed, 2010-03-17 at 17:54 +0000, Stuart Hughes wrote:
> Hi Andrea,
> 
> I've checked in a change that should fix this.  It is all a bit
> convoluted due to the way rpm builds and the fact we have directory
> packages that may or may not create directories under rpm/BUILD (kernels
> directory builds for example).

I verified your latest patch with my 'local' package and everything
worked well. Thanks again for support and for continuously improving
ltib.

Regards,
Andrea

> 
> The change says that for 'local' packages (e.g. ones with no source
> tarballs) only do a scbuild/scdeploy rebuild if:
> 
> a normal build (./ltib -p pkg)  _AND_  an rpm has been built before
> 
> This makes sure that the real directory to build in must have been
> created before either by:
> 
> ./ltib -p <pkg> -m prep
> or:
> ./ltib -p <pkg>
> 
> In the second case, bypassing the scbuild/scdeploy rebuild will cause an
> normal rpmbuild, which calls the prep section, thus creating (if
> necessary) creates the real build directory.
> 
> Regards, Stuart
> 
> Stuart Hughes wrote:
> > Hi Andrea,
> > 
> > It looks like a case I've not taken care of with that change.  Let me
> > look later on (I'm tied up on other things right now).  In the mean
> > time, please work-around using the -m prep etc.
> > 
> > Regards, Stuart
> > 
> > Andrea Galbusera wrote:
> >> Stuart,
> >> sorry for bothering you again on this... My last test was to go for a 
> >> straight build of the package by issuing 
> >> a ./ltib -p tpt2000-cvs.spec (no previous run with -m prep). Below is the 
> >> output I get. To me it looks like 
> >> ltib thinking that a source directory should be already available, instead 
> >> of executing %prep and checking out things from CVS.
> >> Do I miss something? Do I have to reset any "cached state" of previous run 
> >> or something like that?
> >>
> >> TIA
> >> Andrea
> >>
> >>> $ ./ltib -p tpt2000-cvs.spec
> >>>
> >>> Processing platform: Tecnint MPC512x based boards
> >>> ===================================================
> >>> using config/platform/mpc5121tpt/.config
> >>>
> >>> Processing: tpt2000-cvs
> >>> =========================
> >>> Build path taken because: directory build, no prebuilt rpm, 
> >>> scbuild/scdeploy already unpacked package
> >>>
> >>> Processing: tpt2000-cvs
> >>> =========================
> >>> Build path taken because: directory build, build key set, no prebuilt 
> >>> rpm, 
> >>>
> >>> rpmbuild --dbpath 
> >>> /home/gizero/work/tpt/mpc5121/ltib-tpt/rootfs//var/lib/rpm 
> >>> --target ppc --define '_unpackaged_files_terminate_build 0' --define 
> >>> '_target_cpu ppc' 
> >>> --define '__strip strip' --define '_topdir 
> >>> /home/gizero/work/tpt/mpc5121/ltib-tpt/rpm' 
> >>> --define '_prefix /usr' --define '_tmppath 
> >>> /home/gizero/work/tpt/mpc5121/ltib-tpt/tmp' 
> >>> --define '_rpmdir /home/gizero/work/tpt/mpc5121/ltib-tpt/rpm/RPMS'  
> >>> --define '_mandir /usr/share/man' --define '_sysconfdir /etc' 
> >>> --define '_localstatedir /var' -bc --short-circuit  
> >>> /home/gizero/work/tpt/mpc5121/ltib-tpt/dist/lfs-5.1/tpt2000/tpt2000-cvs.spec
> >>> Building target platforms: ppc
> >>> Building for target ppc
> >>> Executing(%build): /bin/sh -e 
> >>> /home/gizero/work/tpt/mpc5121/ltib-tpt/tmp/rpm-tmp.41500
> >>> + umask 022
> >>> + cd /home/gizero/work/tpt/mpc5121/ltib-tpt/rpm/BUILD
> >>> + cd /home/gizero/work/tpt/mpc5121/ltib-tpt/rpm/BUILD/tpt2000-local
> >>> /home/gizero/work/tpt/mpc5121/ltib-tpt/tmp/rpm-tmp.41500: line 21: cd: 
> >>> /home/gizero/work/tpt/mpc5121/ltib-tpt/rpm/BUILD/tpt2000-local: No such 
> >>> file or directory
> >>> error: Bad exit status from 
> >>> /home/gizero/work/tpt/mpc5121/ltib-tpt/tmp/rpm-tmp.41500 (%build)
> >>>
> >>>
> >>> RPM build errors:
> >>>     Bad exit status from 
> >>> /home/gizero/work/tpt/mpc5121/ltib-tpt/tmp/rpm-tmp.41500 (%build)
> >>> Build time for tpt2000-cvs: 0 seconds
> >>>
> >>> Failed building tpt2000-cvs
> >>>
> >>>
> >>> f_buildrpms() returned an error, exiting
> >>> traceback:
> >>>  main:566
> >>>
> >>>
> >>> Started: Tue Mar 16 10:40:33 2010
> >>> Ended:   Tue Mar 16 10:40:33 2010
> >>> Elapsed: 0 seconds
> >>>
> >>> These packages failed to build:
> >>> tpt2000-cvs 
> >>>
> >>> Build Failed
> >>>
> >>> Exiting on error or interrupt
> >>
> >>
> >>
> > 
> > 
> > _______________________________________________
> > LTIB home page: http://ltib.org
> > 
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
> > 
>