Re: [Ltib] mconf error

[Stuart Hughes]

Great, that should fix it.

Regards, Stuart

Wiekierak, Michael (STP) wrote:
> My version of LTIB is from Freescale (L2.6.31_09.12.00_SDK_source.tar.gz).
> 
> This is my initial install of LTIB on this machine.
> 
> Before I received your answer Stuart, I was searching the web and I found a 
> Ubuntu specific problem that was fixed with the line:
> 
> $cmd .= "--force-debian " if $rpm =~ m/rpm-fs/ && `uname -a` =~ m/ubuntu/i;
> 
> added to the ltib script after line 929.  
> 
> Then I prerformed an "./ltib -m distclean", then started the LTIB build 
> again,  It is currently in the process of building now.   I'll post again if 
> it doesn't succeed, but it looks as if its on the way.
> 
> Thanks,
> 
> Mike
> 
> -----Original Message-----
> From: Stuart Hughes [mailto:address@hidden 
> Sent: Tuesday, June 22, 2010 2:31 PM
> To: Wiekierak, Michael (STP)
> Cc: address@hidden
> Subject: Re: [Ltib] (no subject)
> 
> Hi Mike,
> 
> Which version of LTIB is this (e.g. from Savannah or Freescale?) Is this the 
> first time anyone on this machine has run ltib, or has it started to fail?
> 
> When LTIB is first run, it builds a bunch of host support packages which it 
> puts in /opt/ltib/usr/bin (or for freescsale /opt/freescale/usr/bin IIRC).  
> One such package is lkc, which provides mconf.  This path is added into LTIB 
> build environment, so it should be found if it's there.
> 
> Can you check to see if you /opt/{ltib,freescale} area contains this, for 
> example my host has:
> 
> ...
> libtool*
> libtoolize*
> makeinfo*
> mconf*
> mkfs.cramfs*
> mkfs.jffs*
> mkfs.jffs2*
> ...
> 
> Regards, Stuart
> 
> 
> Wiekierak, Michael (STP) wrote:
>> Running the initial instance of ./ltib I get this error:
>>  
>> Can't exec "mconf": No such file or directory at 
>> /home/boston/ltib/ltib/bin/Ltibutils.pm line 972.
>> exec: mconf /home/boston/ltib/ltib/config/main.lkc: No such file or 
>> directory at /home/boston/ltib/ltib/bin/Ltibutils.pm line 972.
>> traceback:
>> Ltibutils::system_nb:972
>>   main::get_plat_dir:2948
>>    main:548
>>  
>>  
>> Started: Tue Jun 22 13:52:48 2010
>> Ended:   Tue Jun 22 13:52:48 2010
>> Elapsed: 0 seconds
>>  
>>  
>> Build Failed
>>  
>> Exiting on error or interrupt
>> Died at ./ltib line 2948.
>> traceback:
>> main::get_plat_dir:2948
>>   main:548
>>  
>>  
>>  
>> I don't have the file mconf.  I'm running on Ubuntu 10.04.  Any idea?
>>  
>> Thanks
>>  
>> Mike
>>  
>>
>>
>> ----------------------------------------------------------------------
>> --
>>
>> _______________________________________________
>> LTIB home page: http://ltib.org
>>
>> Ltib mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/ltib
>