Re: [Ltib] Failure to build pkgconfig on LPC32xx Target

[Quentin YANG]

Hi Tim, 

Are you saying the latest LTIB release from CVS failed to build Linux image for Phytec 3250 board. (Phytec LPC32xx) ?

In that case, I'll avoid updating my local LTIB installation.

I've successfully built Linux image for Phytec 3250 board. 

( previous kernel 2.6.27.8 and most recent kernel 2.6.34 both passed the LTIB build. 
I am using Fedora 9 with 2.6.27.25 kernel
address@hidden ~]$ uname -r
2.6.27.25-78.2.56.fc9.i686
)

Let me know if you need any assistance.  

I can send u the kernel_pre_config and Phytec_Board_Make_config I used.

Also, please make sure to run 
address@hidden ltib-qs]$./ltib -m distclean
address@hidden ltib-qs]$./ltib --config  
if you want to do another build from scratch. 


Regards,
Quentin

On Tue, Jul 27, 2010 at 5:06 AM, Stuart Hughes <address@hidden> wrote:

Hi Tim,

It's a bug in the package build rules, or at least it's incomplete.  I'd
not tested this before except for building as a host tool.  Clearly it
needs some TLC.  Unfortunately I don't have time to do this right now.
Maybe you could try to fix it and submit back a patch.  Often what is
needed in a case like this is to pre-supply the answer to configure with
the appropriate symbol (you need to look into configure).  There
examples in other .spec files along the lines of:

ac_cv_xxx_xxx=y ./configure .....

Regards, Stuart

Tim Nelson wrote:
> As noted in an earlier post, I'm attempting to get LTIB working on a Phytec board with the LPC3205 SoC. The latest build was stopped with the relevant last lines of output below:
>
> ---BEGIN---
> checking for extra flags to get ANSI library prototypes... configure: error: cannot run test program while cross compiling
> See `config.log' for more details.
> configure: error: /bin/sh './configure' failed for glib-1.2.8
> error: Bad exit status from /usr/src/ltib/tmp/rpm-tmp.19931 (%build)
>
>
> RPM build errors:
>     Bad exit status from /usr/src/ltib/tmp/rpm-tmp.19931 (%build)
> Build time for pkgconfig: 53 seconds
>
> Failed building pkgconfig
>
>
> f_buildrpms() returned an error, exiting
> traceback:
>  main:567
>
>
> Started: Mon Jul 26 09:06:32 2010
> Ended:   Mon Jul 26 09:09:31 2010
> Elapsed: 179 seconds
>
> VERSION          : 10.1.1
> CVS_VERSION      : $Revision: 1.68 $ (Savannah)
> PLATFORM         : phy3250
> GNUTARCH         : arm
> TOOLCHAIN        : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm
> TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp
>
> These packages failed to build:
> pkgconfig
>
> Build Failed
>
> Exiting on error or interrupt
> ---END---
>
> Any thoughts?
>
> --Tim
>

_______________________________________________
LTIB home page: http://ltib.org

Ltib mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/ltib