Re: [Ltib] RTS signal Not enabling in MCF547x/8x

[Stuart Hughes]

Hi Vinay,

This is really a kernel question and you can probably get better help
from Freescale and/or on the uclinux-dev mailing list.

Regards, Stuart

Vinay G. wrote:
> Dear all,
> 
>  
> 
> I have developing the RS-485 communication using the MCF5485 processor.
> I have noticed that the RTS signal was not setting and resetting ,
> 
> Because of this only transmitting is happening but the receive is not
> happening, even though I am directly enabling the respective register
> but written the value to the register. I am using LTIB -2008 release
> with Linux kernel 2.6.25. Can any help me in solving the problem.
> 
>  
> 
> Thanks in advance,
> 
>  
> 
> Thanks and regards,
> 
>  
> 
> Vin. G.
> 
>  
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib