[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Ltib] TOOLCHAIN_PREFIX TOOLCHAIN_PATH
From: |
Stuart Hughes |
Subject: |
Re: [Ltib] TOOLCHAIN_PREFIX TOOLCHAIN_PATH |
Date: |
Wed, 01 Dec 2010 17:49:44 +0000 |
User-agent: |
Thunderbird 2.0.0.16 (X11/20080707) |
Hi Michel,
My apologies for not replying, I've just returned from a week away.
Unfortunately, the last merge out from Freescale has broken mcf5445x
and mcf547x_8x. From memory, this renders the toolchain un-selectable.
For now your best bet is to use the latest ISO from Freescale until this
is fixed at Savannah (I'm not sure when I will get time to do this though).
My apologies again.
Regards, Stuart
Michel Helms wrote:
> Hi,
>
> I am using LTIB for the first time and am stuck in the configuration
> process. I read the LTIB-FAQ on the homepage and got LTIB from CVS just
> today. I need to configure for the Freescale Coldfire 5475 CPU so after
> executing "./ltib" I chose "Freescale MCF547X_8X Coldfire/M68k (MMU)" as
> platform.
>
> After doing "./ltib --configure" (I left all options to standard
> values), my console shows me this error:
> + cp .config defconfig.dev
> You must set configuration values in config/platform/mcf547x_8x/.config for:
> TOOLCHAIN_PREFIX TOOLCHAIN_PATH
> traceback:
> main::check_platform_config:2240
> main::pre_build_checks:1480
> main:564
>
>
> Started: Tue Nov 23 12:36:08 2010
> Ended: Tue Nov 23 12:36:17 2010
> Elapsed: 9 seconds
>
> Use of uninitialized value in concatenation (.) or string at ./ltib line
> 2791.
> VERSION : 10.1.1
> CVS_VERSION : $Revision: 1.71 $ (Savannah)
> PLATFORM : mcf547x_8x
> GNUTARCH : m68k
> TOOLCHAIN :
> TOOLCHAIN_CFLAGS :
>
> Build Failed
> Exiting on error or interrupt
> --------- end console paste
>
> I do understand that I have to specify the toolchain, it's path and/or
> flags in some way. But how? In the configuration screen I can choose the
> - target C library ("glibc")
> - C library package ("from toolchain only")
> - Toolchain component options ("libc shared libraries", "c++ shared
> libraries" and "libgcc*.so*")
> - CFLAGS for gcc/g++
>
> But where to enter the mystic "Toolchain path"? And which CFLAGS should
> I specify?
>
> Thanks in advance,
> Michel
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Ltib] TOOLCHAIN_PREFIX TOOLCHAIN_PATH,
Stuart Hughes <=