|
| From: | Nishanth Satyanarayana |
| Subject: | [Ltib] Stuck at "...booting the kernel" |
| Date: | Mon, 6 Dec 2010 17:01:18 -0800 |
|
Hello, I’m running ltib on lpc 3250 board, and on boot, the
process gets stuck after the linux kernel has been read from USB flash drive.
Any ideas on how to proceed? Thanks, Nish Kickstart bootloader started... Detected NAND Flash ID is: f1ec Kickstart: reading application data Kickstart: starting application Embedded Artists LPC3250 board Build date: Nov 28 2009 16:10:47 Autoboot in progress, press any key to stop U-Boot 2009.03-rc1 (Sep 07 2010 - 12:05:35) DRAM: 64 MB NAND: 128 MiB In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 (Re)start USB... USB: ISP1301 Vendor ID : 0x04cc ISP1301 Product ID : 0x1301 ISP1301 Version ID : 0x0210 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage
Device(s) found reading uImage ................................................................................ .......................................................................... 1584624 bytes read stopping USB.. ## Booting kernel from Legacy Image at 80100000 ... Image Name: Linux-2.6.27.8 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1584560 Bytes = 1.5 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing
Linux............................................................. ...................... done, booting the kernel. |
| [Prev in Thread] | Current Thread | [Next in Thread] |