address@hidden:~/ltib/EA3250$ ./ltib Processing platform: Embedded Artists LPC3250 OEM Board with the NXP LPC32XX SoC ================================================================================== using config/platform/ea3250/.config Processing: fake-provides =========================== Processing: kernel-2.6.34-lpc32xx =================================== Build path taken because: directory build, build key set, scbuild/scdeploy already unpacked package Processing: kernel-2.6.34-lpc32xx =================================== Build path taken because: directory build, build key set, no prebuilt rpm, rpmbuild --dbpath /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' --define '__strip strip' --define '_topdir /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir /home/enrico/ltib/EA3250/rpm/RPMS' --define '_mandir /usr/share/man' --define '_sysconfdir /etc' --define '_localstatedir /var' -bc --short-circuit /home/enrico/ltib/EA3250/tmp/kernel-2.6.34-lpc32xx.spec Building target platforms: arm Building for target arm Executing(%build): /bin/sh -e /home/enrico/ltib/EA3250/tmp/rpm-tmp.59858 + umask 022 + cd /home/enrico/ltib/EA3250/rpm/BUILD + cd linux-2.6.34 + eval echo + echo + PKG_KERNEL_PATH_PRECONFIG= + eval echo + echo + PKG_KERNEL_KBUILD_PRECONFIG= + eval echo linux-2.6.34-ea3250.config + echo linux-2.6.34-ea3250.config + PKG_KERNEL_PRECONFIG=linux-2.6.34-ea3250.config + KSRC_DIR=/home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.34 + : arm + : ccache /usr/bin/gcc -B/usr/bin// + : linux-2.6.34-ea3250.config + : /home/enrico/ltib/EA3250/config/platform/ea3250 + : /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.34 + rm -f /home/enrico/ltib/EA3250/rpm/BUILD/linux + ln -s /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.34 /home/enrico/ltib/EA3250/rpm/BUILD/linux + cd /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.34 + KBOUT= + [ -n -a != . ] + KBOUT=. + KTARG=zImage + SYSCFG_KTARG=uImage + [ linux-2.6.34-ea3250.config = defconfig ] + [ -f /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.34-ea3250.config.dev ] + CFG_PATH=/home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.34-ea3250.config.dev + break + [ -z /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.34-ea3250.config.dev ] + [ arm = ppc -a -f arch/powerpc/Kconfig ] + [ -n ] + [ -n /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.34-ea3250.config.dev ] + cp -f /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.34-ea3250.config.dev ./.config + [ -z -a -n y -o -n ] + make ARCH=arm HOSTCC=ccache /usr/bin/gcc -B/usr/bin// menuconfig scripts/kconfig/mconf arch/arm/Kconfig *** End of Linux kernel configuration. *** Execute 'make' to build the kernel or try 'make help'. + [ -f /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.34-ea3250.config.dev ] + diff -q ./.config /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.34-ea3250.config.dev + [ -n ] + [ %{kernel_series} = 2.4 ] + make ARCH=arm HOSTCC=ccache /usr/bin/gcc -B/usr/bin// uImage scripts/kconfig/conf -s arch/arm/Kconfig CHK include/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CALL scripts/checksyscalls.sh CHK include/generated/compile.h GZIP kernel/config_data.gz IKCFG kernel/config_data.h CC kernel/configs.o LD kernel/built-in.o LD vmlinux.o MODPOST vmlinux.o WARNING: modpost: Found 1 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' GEN .version CHK include/generated/compile.h UPD include/generated/compile.h CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 KSYM .tmp_kallsyms1.S AS .tmp_kallsyms1.o LD .tmp_vmlinux2 KSYM .tmp_kallsyms2.S AS .tmp_kallsyms2.o LD vmlinux SYSMAP System.map SYSMAP .tmp_System.map OBJCOPY arch/arm/boot/Image Kernel: arch/arm/boot/Image is ready GZIP arch/arm/boot/compressed/piggy.gzip SHIPPED arch/arm/boot/compressed/lib1funcs.S AS arch/arm/boot/compressed/lib1funcs.o AS arch/arm/boot/compressed/piggy.gzip.o LD arch/arm/boot/compressed/vmlinux OBJCOPY arch/arm/boot/zImage Kernel: arch/arm/boot/zImage is ready UIMAGE arch/arm/boot/uImage Image Name: Linux-2.6.34 Created: Mon Dec 20 20:57:39 2010 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1981812 Bytes = 1935.36 kB = 1.89 MB Load Address: 0x80008000 Entry Point: 0x80008000 Image arch/arm/boot/uImage is ready + grep -q ^CONFIG_MODULES= ./.config + make ARCH=arm HOSTCC=ccache /usr/bin/gcc -B/usr/bin// modules CHK include/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CALL scripts/checksyscalls.sh Building modules, stage 2. MODPOST 15 modules + [ -n ] + exit 0 Build time for kernel-2.6.34-lpc32xx: 55 seconds Processing: kernel-2.6.34-lpc32xx =================================== Build path taken because: directory build, build key set, no prebuilt rpm, rpmbuild --dbpath /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' --define '__strip strip' --define '_topdir /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir /home/enrico/ltib/EA3250/rpm/RPMS' --define '_mandir /usr/share/man' --define '_sysconfdir /etc' --define '_localstatedir /var' -bi --short-circuit /home/enrico/ltib/EA3250/tmp/kernel-2.6.34-lpc32xx.spec Building target platforms: arm Building for target arm Executing(%install): /bin/sh -e /home/enrico/ltib/EA3250/tmp/rpm-tmp.95517 + umask 022 + cd /home/enrico/ltib/EA3250/rpm/BUILD + cd linux-2.6.34 + eval echo + echo + PKG_KERNEL_PATH_PRECONFIG= + eval echo + echo + PKG_KERNEL_KBUILD_PRECONFIG= + eval echo + echo + DTC_NAMES= + eval echo + echo + SYSCFG_DTC_PATH= + DTC_PAD=%dtc_pad + [ %dtc_pad = %dtc_pad ] + DTC_PAD=1024 + KSRC_DIR=/home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.34 + cd /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.34 + KBOUT= + [ -n ] + KBOUT=. + [ arm = ppc -a -f arch/powerpc/Kconfig ] + grep -q CONFIG_XIP_KERNEL=y ./.config + BOOT_KERNEL=arch/arm/boot/zImage + rm -rf /home/enrico/ltib/EA3250/tmp/kernel + mkdir -p /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/boot + grep -q ^CONFIG_MODULES= ./.config + make ARCH=arm HOSTCC=ccache /usr/bin/gcc -B/usr/bin// DEPMOD=/bin/true INSTALL_MOD_PATH=/home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm modules_install Warning: you may need to install module-init-tools See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt INSTALL drivers/connector/cn.ko INSTALL drivers/mmc/host/mmc_spi.ko INSTALL drivers/mmc/host/sdhci-pltfm.ko INSTALL drivers/mmc/host/sdhci.ko INSTALL drivers/net/ax88796.ko INSTALL drivers/net/b44.ko INSTALL drivers/scsi/scsi_tgt.ko INSTALL drivers/scsi/scsi_wait_scan.ko INSTALL drivers/ssb/ssb.ko INSTALL drivers/usb/core/usbcore.ko INSTALL drivers/usb/storage/usb-storage.ko INSTALL fs/isofs/isofs.ko INSTALL lib/crc-ccitt.ko INSTALL lib/crc-itu-t.ko INSTALL lib/crc7.ko DEPMOD 2.6.34 + ls /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/lib/modules + KERNEL_VER=2.6.34 + rm -f /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/lib/modules/2.6.34/build + ln -s /usr/src/linux /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/lib/modules/2.6.34/build + rm -f /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/lib/modules/2.6.34/source + ln -s /usr/src/linux /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/lib/modules/2.6.34/source + SYSCFG_BOOT_KERNEL=arch/arm/boot/uImage + [ -n ] + [ -n ] + cp ./vmlinux /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/boot + cp ./System.map /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/boot + cp ./arch/arm/boot/uImage /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/boot + basename arch/arm/boot/uImage + ln -s uImage /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/boot/bootable_kernel + cp ./.config /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/boot/linux.config + DTC_PATH=arch/arm/boot/dts + [ arm = powerpc -a -d arch/arm/boot/dts ] + [ -n y ] + mkdir -p /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/asm-arm ] + [ -d include/asm-generic ] + cp -a include/asm-generic /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/config ] + cp -a include/config /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/linux ] + cp -a include/linux /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/math-emu ] + cp -a include/math-emu /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/media ] + cp -a include/media /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/mtd ] + cp -a include/mtd /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/net ] + cp -a include/net /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/pcmcia ] + cp -a include/pcmcia /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/rxrpc ] + cp -a include/rxrpc /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/scsi ] + cp -a include/scsi /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/sound ] + cp -a include/sound /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d include/video ] + cp -a include/video /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d ./include/asm ] + [ -d ./include/config ] + cp -a ./include/config /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ -d ./include/linux ] + cp -a ./include/linux /home/enrico/ltib/EA3250/tmp/kernel//opt/nxp/rootfs/arm/usr/src/linux/include + [ arm = arm ] + [ -d ./include/asm/arch ] + echo Don't know how to copy asm headers for this kernel Don't know how to copy asm headers for this kernel Processing files: kernel-2.6.34-1 Finding Provides: (using /opt/ltib/usr/lib/rpm/find-provides)... Finding Requires: (using /opt/ltib/usr/lib/rpm/find-requires)... PreReq: rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 Build time for kernel-2.6.34-lpc32xx: 29 seconds Processing: kernel-2.6.34-lpc32xx =================================== Build path taken because: build key set, no prebuilt rpm, rpmbuild --dbpath /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' --define '__strip strip' --define '_topdir /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir /home/enrico/ltib/EA3250/rpm/RPMS' --define '_mandir /usr/share/man' --define '_sysconfdir /etc' --define '_localstatedir /var' -bb /home/enrico/ltib/EA3250/rpm/SPECS/kernel-2.6.34-lpc32xx.spec Building target platforms: arm Building for target arm Executing(%prep): /bin/sh -e /home/enrico/ltib/EA3250/tmp/rpm-tmp.19982 + umask 022 + cd /home/enrico/ltib/EA3250/rpm/BUILD + exit 0 Executing(%build): /bin/sh -e /home/enrico/ltib/EA3250/tmp/rpm-tmp.19982 + umask 022 + cd /home/enrico/ltib/EA3250/rpm/BUILD + exit 0 Executing(%install): /bin/sh -e /home/enrico/ltib/EA3250/tmp/rpm-tmp.19982 + umask 022 + cd /home/enrico/ltib/EA3250/rpm/BUILD Processing files: kernel-2.6.34-1 PreReq: rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 Wrote: /home/enrico/ltib/EA3250/rpm/RPMS/arm/kernel-2.6.34-1.arm.rpm Executing(%clean): /bin/sh -e /home/enrico/ltib/EA3250/tmp/rpm-tmp.17357 + umask 022 + cd /home/enrico/ltib/EA3250/rpm/BUILD + rm -rf /home/enrico/ltib/EA3250/tmp/kernel + exit 0 Build time for kernel-2.6.34-lpc32xx: 5 seconds sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs --dbpath /var/lib/rpm -e --allmatches --nodeps --noscripts --define '_tmppath /tmp/ltib' kernel 2>/dev/null [sudo] password for enrico: sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs --dbpath /var/lib/rpm --prefix / --ignorearch -ivh --force --excludedocs --noscripts --define '_tmppath /tmp/ltib' /home/enrico/ltib/EA3250/rpm/RPMS/arm/kernel-2.6.34-1.arm.rpm error: failed to stat /home/enrico/.gvfs: Permission denied Preparing... ########################################### [100%] 1:kernel ########################################### [100%] modeps rebuild forced by kernel-2.6.34-lpc32xx Processing: skell =================== Processing: base_libs ======================= Processing: busybox ===================== Processing: binutils ====================== Processing: gmp ================= Processing: libtermcap ======================== Processing: bash ================== Processing: coreutils ======================= Processing: zlib ================== Processing: ncurses ===================== Processing: m4 ================ Processing: net-tools ======================= Processing: inetutils ======================= Processing: bzip2 =================== Processing: ed ================ Processing: lkc ================= Processing: tar ================= Processing: libusb ==================== Processing: usbutils ====================== Processing: ethtool ===================== Processing: boa ================= Processing: tcp_wrappers ========================== Processing: portmap ===================== Processing: dropbear ====================== Processing: openssl ===================== Processing: openssh ===================== Processing: time ================== Processing: watchdog ====================== Processing: hotplug ===================== Processing: expat =================== Processing: gen_init_cpio =========================== Processing: lzo ================= Processing: mtd-utils ======================= Processing: unzip =================== Processing: freetype ====================== Processing: fontconfig ======================== Build path taken because: directory build, no prebuilt rpm, scbuild/scdeploy already unpacked package Processing: fontconfig ======================== Build path taken because: directory build, build key set, no prebuilt rpm, rpmbuild --dbpath /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' --define '__strip strip' --define '_topdir /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir /home/enrico/ltib/EA3250/rpm/RPMS' --define '_mandir /usr/share/man' --define '_sysconfdir /etc' --define '_localstatedir /var' -bc --short-circuit /home/enrico/ltib/EA3250/dist/lfs-5.1/fontconfig/fontconfig.spec Building target platforms: arm Building for target arm Executing(%build): /bin/sh -e /home/enrico/ltib/EA3250/tmp/rpm-tmp.26239 + umask 022 + cd /home/enrico/ltib/EA3250/rpm/BUILD + cd fontconfig-2.4.2 + ac_cv_prog_HASDOCBOOK=no ac_cv_prog_CC_FOR_BUILD=ccache /usr/bin/gcc -B/usr/bin// ./configure --prefix=/usr --host=arm-linux --build=i686-pc-linux-gnu --with-arch=arm --sysconfdir=/etc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for arm-linux-strip... no checking for strip... strip configure: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to address@hidden checking whether to enable maintainer-specific portions of Makefiles... no checking for arm-linux-gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... yes checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking build system type... i686-pc-linux-gnu checking host system type... arm-unknown-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... ld checking if the linker (ld) is GNU ld... yes checking for ld option to reload object files... -r checking for BSD-compatible nm... nm checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for arm-linux-g77... no checking for arm-linux-f77... no checking for arm-linux-xlf... no checking for arm-linux-frt... no checking for arm-linux-pgf77... no checking for arm-linux-cf77... no checking for arm-linux-fort77... no checking for arm-linux-fl32... no checking for arm-linux-af77... no checking for arm-linux-f90... no checking for arm-linux-xlf90... no checking for arm-linux-pgf90... no checking for arm-linux-pghpf... no checking for arm-linux-epcf90... no checking for arm-linux-gfortran... no checking for arm-linux-g95... no checking for arm-linux-f95... no checking for arm-linux-fort... no checking for arm-linux-xlf95... no checking for arm-linux-ifort... no checking for arm-linux-ifc... no checking for arm-linux-efc... no checking for arm-linux-pgf95... no checking for arm-linux-lf95... no checking for arm-linux-ftn... no checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse nm output from gcc object... ok checking for objdir... .libs checking for arm-linux-ar... ar checking for arm-linux-ranlib... no checking for ranlib... ranlib checking for arm-linux-strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... ld checking if the linker (ld) is GNU ld... yes checking whether the g++ linker (ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking whether make sets $(MAKE)... (cached) yes checking for a C compiler for build tools... checking for gcc... (cached) ccache /usr/bin/gcc -B/usr/bin// ccache /usr/bin/gcc -B/usr/bin// checking for suffix of executable build tools... checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for pid_t... yes checking for vprintf... yes checking for _doprnt... no checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... no checking for geteuid... yes checking for getuid... yes checking for link... yes checking for memmove... yes checking for memset... yes checking for mkstemp... yes checking for strchr... yes checking for strrchr... yes checking for strtol... yes checking for getopt... yes checking for getopt_long... yes checking for sysconf... yes checking for ftruncate... yes checking for chsize... no checking for rand... yes checking for random... yes checking for lrand48... yes checking for a usable iconv... libc checking for freetype-config... no configure: error: You must have freetype installed; see http://www.freetype.org/ error: Bad exit status from /home/enrico/ltib/EA3250/tmp/rpm-tmp.26239 (%build) RPM build errors: Bad exit status from /home/enrico/ltib/EA3250/tmp/rpm-tmp.26239 (%build) Build time for fontconfig: 14 seconds Failed building fontconfig f_buildrpms() returned an error, exiting traceback: main:567 Started: Mon Dec 20 20:56:48 2010 Ended: Mon Dec 20 20:58:44 2010 Elapsed: 116 seconds VERSION : 10.1.1 CVS_VERSION : $Revision: 1.71 $ (Savannah) PLATFORM : ea3250 GNUTARCH : arm TOOLCHAIN : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp These packages failed to build: fontconfig Build Failed Exiting on error or interrupt