[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Mldonkey-users] Traffic shaping
From: |
Martin Kuhlmann |
Subject: |
Re: [Mldonkey-users] Traffic shaping |
Date: |
Wed, 22 Jan 2003 18:08:20 +0100 |
Hi Goswin,
> 1. QoS scheduling
> root --- HTB 128 KBit limit which dsl has here
> |
> +-- 126 - 128 KBit normal traffic
> +-- 1 - 64 KBit SYN/ACK/FIN/RST mldonkey connects
> +-- 1 - 64 KBit mldonkey data
> Further I have mldonkey usually limited to 4-6 KB/s upload, which
> gives about 8 KB/s up traffic.
And thats your ceiling on your mldonkey HTB.
Please do a 'tc -s class show dev $YOURDEV' and post your results. You
will see, that your mldonkey-traffic goes only to one of your two
classes. My mldonkey gets marked only one way... there are simply no
SYN/ACK/FIN/RST NONE packets from mldonkey.
> The solution would be for mldonkey to realy only send out X Byte/s and
> priotise internally. It should send less than X B/s uploads if it
> already used 2 KB for searching and connects. But mldonkey should not
> just stop sending when X KB has been sent but priotize on what to
> send. Send chat first, block requests and searches next and only at
> the very end uploads.
Full ACK. But since the devs already said something in the line of
'much work' and 'effecting most parts of mldonkey' i don't expect
something new in mldonkeys traffic control soon. Too bad I don't speak
ocaml. Should be enough if i know, mldonkey will send all uploaddata to
someone else from port $UPPORT and all other from a different port.
Gruß,
Martin
--
PGP public key ID: 0x27D580B5
PGP public key fingerprint: 3761 E66D 8600 EF88 A547 65B7 1CBC 1F8F