Re: Different daemon times for different processes

[rory]

 Ah, yeah. I thought there was something like that, just couldn't find it.

thx

Might see some code changes from me, should the need arise. Using monit 
in another product...

On 8/31/10 12:35 PM, Jan-Henrik Haukeland wrote:
> Hi Rory, long time :)
>
> The every statement comes to mind. From the manual;
>
>   every           Validate this entry only at every n poll cycle.
>                   Useful in daemon mode when the cycle is short
>                   and a service takes some time to start.
>
>
>   check process dynamo with pidfile /etc/dynamo.pid
>         start program = "/etc/init.d/dynamo start"
>         stop program  = "/etc/init.d/dynamo stop"
>         if failed port 8840 then alert
>         every 2 cycles
>
>
>
>
>
>
> On 31. aug. 2010, at 20.39, rory wrote:
>
> > Before I go adding this functionality, I want to double check that it isn't 
> > there and solicit some input.
> >
> > Generally, I can set the cycle time of monit with
> >
> > set daemon 20
> >
> > However, as it turns out, my system has differing needs here. I'm thinking that 
> > something like
> >
> > check service foo with pidfile foo.pid
> > blah
> > blah
> > set cycle check 3
> >
> > (This would cause it to only be checked every third cycle, so in the above 
> > example, it would be checked once per minute)
> >
> > Any comments?
> >
> > --
> > To unsubscribe:
> > http://lists.nongnu.org/mailman/listinfo/monit-general
>
> --
> To unsubscribe:
> http://lists.nongnu.org/mailman/listinfo/monit-general