Re: SSL Error | Handshake Failure

[Martin Pala]

Please check monit log and try to run monit in debug mode:

monit -vI

send the whole output, there was probably some problem with starting the httpd thread (you can send it to address@hidden if you don't want to uncover the configuration.

Regards,

Martin

On 08 Feb 2016, at 19:16, Chuck Charleston <address@hidden> wrote:

Well monit is running but nothing is listening on port 2812

netstat -plnt | grep 2812

Returns nothing.

Port 2812 is open in the firewall (CSF). I also tried disabling csf completely and it made no difference. 

Regards,

Chuck

On 8 February 2016 at 12:35, Russell Simpkins <address@hidden> wrote:

did you confirm you can connect using telnet and that the something is listening on 2812 e.g. lsof -i:2812

On Mon, Feb 8, 2016 at 12:15 PM, Chuck Charleston <address@hidden> wrote:

Hi Martin,

I have tried as you suggested and reloaded monit but unfortunately, still receive the error: Cannot create socket to [localhost]:2812 -- Connection refused

Regards,

Chuck

On 8 February 2016 at 11:56, Martin Pala <address@hidden> wrote:

The "use addres 127.0.0.1" makes monit listen only on the loopback interface ... the "allow mmonit.server.ip" has no effect, as M/Monit won't be able to reach Monit's httpd.

I suggest to change the configuration like this (remove "use address 127.0.0.1"):

--8<--

    set httpd port 2812

        SSL enable

        pemfile /var/certs/monit.pem

        allowselfcertification

        allow mmonit.server.ip #note: allow access from M/Monit

allow 127.0.0.1 #note: allow access for monit CLI

        allow user:pass

--8<--

Monit will then listen on all interfaces, so it can be reached both from the M/Monit host and localhost.

Please make sure to do "monit reload" after the configuration change.

Regards,

Martin

On 08 Feb 2016, at 15:29, Chuck Charleston <address@hidden> wrote:

Hi Martin,

I have done that now and reloaded monit, but the issue persists.

Regards,

Chuck

On 8 February 2016 at 09:16, Martin Pala <address@hidden> wrote:

just add "allow 127.0.0.1" to the list of allow options

Regards,

Martin

8. 2. 2016 v 15:11, Chuck Charleston <address@hidden>:

Hi Martin,

Here it is.

set mmonit https://user:address@hidden:8443/collector

set httpd port 2812 and use address 127.0.0.1

SSL enable

pemfile /var/certs/monit.pem

allowselfcertification

allow mmonit.server.ip

allow user:pass

This is on a Centos 7 cPanel DNSonly server.

Regards,

Chuck

On 8 February 2016 at 04:56, Martin Pala <address@hidden> wrote:

Hi,

please send the "set httpd" statement from your monit configuration file include "allow" options (obfuscate credentials if any).

Regards,
Martin


> On 07 Feb 2016, at 22:59, Chuck Charleston <address@hidden> wrote:
>
> Hi Tino,
>
> Thanks for that! I have fixed it now and it is communicating with M/Monit fine. I now however have another error when running monit status:
>
> Cannot create socket to [127.0.0.1]:2812 -- Connection refused
>
> Same thing if I use the actual external IP or hostname. Never had this issue before so a bit strange though Monit seems to be working fine and I do not use the actual web interface for Monit since I have M/Monit.
>
> I'll keep digging into it but weird that it comes up.

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general