Thanks for patch Bryan, i have merged it + cleaned up remaining uid/gid examples
Best regards,
Martin
On 28 Apr 2017, at 15:35, Bryan Harris <address@hidden> wrote:
Thanks Martin. I tried to follow Monit project directions to create a pull request and I put it at the link below. Hopefully I followed the instructions correctly.
On Fri, Apr 28, 2017 at 8:01 AM, Martin Pala <address@hidden> wrote:
Hi,
"disk" is reserved word, so you need to quote it if you want to use it as string:
if failed gid "disk" then unmonitor
Best regards,
Martin
> On 28 Apr 2017, at 13:40, Bryan Harris <address@hidden> wrote:
>
> Hi folks,
>
> I'm doing some testing with latest version of Monit built on Slackware 14.2 and noticed a funny syntax error. When I use the filesystem check, the GID gives me the below error. The group disk does exist on my system and the filesystem device is that group. If I comment it out everything works. Caps or no caps does not make any difference.
>
> check filesystem rootfs with path /dev/0/0
> if failed permission 660 then unmonitor
> if failed uid root then unmonitor
> # if failed gid disk then unmonitor
> IF FAILED GID disk THEN unmonitor
> if space usage > 80% for 5 times within 15 cycles then alert
> if space usage > 99% then stop
> if inode usage > 30000 then alert
> if inode usage > 99% then stop
> if read rate > 1 MB/s for 5 cycles then alert
> if read rate > 500 operations/s for 5 cycles then alert
> if write rate > 1 MB/s for 5 cycles then alert
> if write rate > 500 operations/s for 5 cycles then alert
> if service time > 10 milliseconds for 3 times within 5 cycles then alert
> group server
>
> address@hidden:/root]
> $ monit -t
> /etc/monitrc:236: syntax error 'disk'
>
> address@hidden:/root]
> $ getent group disk
> disk:x:6:root,adm
>
>
> V/r,
> Bryan