Re: trouble with responsetime keyword

[M/Monit Support]

The configuration requires different operator:

         if failed port 8081 protocol http and responsetime < 1 ms then alert

Similarly to the other statement, the "if failed" rule defines the normal 
state, that triggers the error if the expression is not true. 

Best regards,
The M/Monit team


> On 3. 5. 2022, at 22:13, Lutz Mader <lutz.mader@freenet.de> wrote:
> 
> Hello M/Monit Support,
> nice to see, but the messages does not fit well, I think.
> 
> For my definition
> check host Localhost with address 192.168.1.4
>  if failed port 8081 protocol http and responsetime > 1 ms then alert
> 
> I got the following
> [2022-05-03T21:49:03+0200] debug    : 'Localhost' succeeded testing
> protocol [HTTP] at [192.168.1.4]:8081 [TCP/IP] [response time 0.908 ms]
> [2022-05-03T21:49:03+0200] debug    : 'Localhost' connection succeeded
> to [192.168.1.4]:8081 [TCP/IP]
> [2022-05-03T21:49:03+0200] error    : 'Localhost' response time 0.908 ms
> exceeded the limit [time > 1 ms]
> 
> The messages "response time 0.908 ms exceeded the limit" does not fit,
> the response time does not exceeded the limit.
> 
> For the following
> check host Localhost with address 192.168.1.4
>  if failed port 8081 protocol http and responsetime < 1 ms then alert
> 
> The messages fit better
> [2022-05-03T21:55:58+0200] debug    : 'Localhost' succeeded testing
> protocol [HTTP] at [192.168.1.4]:8081 [TCP/IP] [response time 0.877 ms]
> [2022-05-03T21:55:58+0200] debug    : 'Localhost' connection succeeded
> to [192.168.1.4]:8081 [TCP/IP]
> [2022-05-03T21:55:58+0200] debug    : 'Localhost' response time 0.877 ms
> succeeded [time < 1 ms]
> :
> [2022-05-03T21:56:28+0200] debug    : 'Localhost' succeeded testing
> protocol [HTTP] at [192.168.1.4]:8081 [TCP/IP] [response time 1.099 ms]
> [2022-05-03T21:56:28+0200] debug    : 'Localhost' connection succeeded
> to [192.168.1.4]:8081 [TCP/IP]
> [2022-05-03T21:56:28+0200] error    : 'Localhost' response time 1.099 ms
> exceeded the limit [time < 1 ms]
> 
> This is true, the limit was exceeded.
> 
> Nice to see, someone add the responsetime option.
> 
>> Fixed (will be part of next release)
>> 
>> Best regards,
>> The M/Monit team
> 
> With regards,
> a comment only,
> Lutz