[paparazzi-commits] [4897] new gfi ac, moving

paparazzi-commits
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[paparazzi-commits] [4897] new gfi ac, moving

From:	Martin Mueller
Subject:	[paparazzi-commits] [4897] new gfi ac, moving
Date:	Sat, 01 May 2010 15:28:23 +0000
Revision: 4897
          http://svn.sv.gnu.org/viewvc/?view=rev&root=paparazzi&revision=4897
Author:   mmm
Date:     2010-05-01 15:28:22 +0000 (Sat, 01 May 2010)
Log Message:
-----------
new gfi ac, moving

Modified Paths:
--------------
    paparazzi3/trunk/conf/airframes/funjetgfi5.xml

Added Paths:
-----------
    paparazzi3/trunk/conf/airframes/funjetgfi9.xml
    paparazzi3/trunk/conf/airframes/mm/fixed-wing/
    paparazzi3/trunk/conf/airframes/mm/fixed-wing/merlin.xml
    paparazzi3/trunk/conf/airframes/mm/fixed-wing/miniwing.xml

Modified: paparazzi3/trunk/conf/airframes/funjetgfi5.xml
===================================================================
--- paparazzi3/trunk/conf/airframes/funjetgfi5.xml      2010-04-29 23:07:44 UTC 
(rev 4896)
+++ paparazzi3/trunk/conf/airframes/funjetgfi5.xml      2010-05-01 15:28:22 UTC 
(rev 4897)
@@ -6,16 +6,16 @@
      Tilted infrared sensor 
(http://paparazzi.enac.fr/wiki/index.php/Image:Tiny_v2_1_Funjet.jpg)
      XBee modem
      Payload: Sensirion humidity/temp, VTI pressure/temp
-     K61, LEA 4 (set to POSLLH)
+     K66, LEA 5
 -->
 
-<airframe name="Funjet GFI 5 K61">
+<airframe name="Funjet GFI 5 K66">
 
 <!-- commands section -->
   <servos>
     <servo name="MOTOR"         no="0" min="1000" neutral="1000" max="2000"/>
-    <servo name="AILEVON_LEFT"  no="2" min="1900" neutral="1622" max="1100"/>
-    <servo name="AILEVON_RIGHT" no="6" min="1100" neutral="1538" max="1900"/>
+    <servo name="AILEVON_LEFT"  no="2" min="1900" neutral="1520" max="1100"/>
+    <servo name="AILEVON_RIGHT" no="6" min="1100" neutral="1456" max="1900"/>
   </servos>
 
   <commands>

Added: paparazzi3/trunk/conf/airframes/funjetgfi9.xml
===================================================================
--- paparazzi3/trunk/conf/airframes/funjetgfi9.xml                              
(rev 0)
+++ paparazzi3/trunk/conf/airframes/funjetgfi9.xml      2010-05-01 15:28:22 UTC 
(rev 4897)
@@ -0,0 +1,247 @@
+<!DOCTYPE airframe SYSTEM "airframe.dtd">
+
+<!-- Funjet Multiplex (http://www.multiplex-rc.de/), Jeti ECO 25
+     Tiny 2.11 board (http://paparazzi.enac.fr/wiki/index.php/Tiny_v2)
+     PerkinElmer TPS334 IR Sensors
+     Tilted infrared sensor 
(http://paparazzi.enac.fr/wiki/index.php/Image:Tiny_v2_1_Funjet.jpg)
+     XBee modem
+     Payload: Sensirion humidity/temp, VTI pressure/temp
+     K68, LEA 5
+-->
+
+<airframe name="Funjet GFI 9 K68">
+
+<!-- commands section -->
+  <servos>
+    <servo name="MOTOR"         no="0" min="1000" neutral="1000" max="2000"/>
+    <servo name="AILEVON_LEFT"  no="2" min="1900" neutral="1574" max="1100"/>
+    <servo name="AILEVON_RIGHT" no="6" min="1100" neutral="1509" max="1900"/>
+  </servos>
+
+  <commands>
+    <axis name="THROTTLE" failsafe_value="0"/>
+    <axis name="ROLL"     failsafe_value="0"/>
+    <axis name="PITCH"    failsafe_value="0"/>
+  </commands>
+
+  <rc_commands>
+    <set command="THROTTLE" value="@THROTTLE"/>
+    <set command="ROLL"     value="@ROLL"/>
+    <set command="PITCH"    value="@PITCH"/>
+  </rc_commands>
+
+  <section name="MIXER">
+    <define name="AILEVON_AILERON_RATE" value="0.45"/>
+    <define name="AILEVON_ELEVATOR_RATE" value="0.8"/>
+  </section>
+
+  <command_laws>
+    <let var="aileron"  value="@ROLL  * AILEVON_AILERON_RATE"/>
+    <let var="elevator" value="@PITCH * AILEVON_ELEVATOR_RATE"/>  
+    <set servo="MOTOR"           value="@THROTTLE"/>
+    <set servo="AILEVON_LEFT"  value="$elevator + $aileron"/>
+    <set servo="AILEVON_RIGHT" value="$elevator - $aileron"/>
+  </command_laws>
+
+  <section name="AUTO1" prefix="AUTO1_">
+    <define name="MAX_ROLL" value="0.85"/>
+    <define name="MAX_PITCH" value="0.6"/>
+  </section>
+
+  <section name="adc" prefix="ADC_CHANNEL_">
+    <define name="IR1" value="ADC_1"/>
+    <define name="IR2" value="ADC_2"/>
+    <define name="IR_TOP" value="ADC_0"/>
+    <define name="IR_NB_SAMPLES" value="16"/>
+  </section>
+
+  <section name="INFRARED" prefix="IR_">
+    <define name="ADC_IR1_NEUTRAL" value="512"/>
+    <define name="ADC_IR2_NEUTRAL" value="512"/>
+    <define name="ADC_TOP_NEUTRAL" value="512"/>
+
+    <define name="CORRECTION_UP" value="1."/>
+    <define name="CORRECTION_DOWN" value="1."/>
+    <define name="CORRECTION_LEFT" value="1."/>
+    <define name="CORRECTION_RIGHT" value="1."/>
+
+    <define name="LATERAL_CORRECTION" value="-1"/>
+    <define name="LONGITUDINAL_CORRECTION" value="1"/>
+    <define name="VERTICAL_CORRECTION" value="1.5"/>
+
+    <define name="HORIZ_SENSOR_TILTED" value="1"/>
+    <define name="IR1_SIGN" value="1"/>
+    <define name="IR2_SIGN" value="-1"/>
+    <define name="TOP_SIGN" value="-1"/>
+
+    <define name="ROLL_NEUTRAL_DEFAULT" value="0" unit="deg"/>
+    <define name="PITCH_NEUTRAL_DEFAULT" value="0" unit="deg"/>
+  </section>
+
+  <section name="BAT">
+    <define name="MILLIAMP_AT_FULL_THROTTLE" value="10000."/>
+    <define name="CATASTROPHIC_BAT_LEVEL" value="9.3" unit="V"/>
+                                        <!-- 0.0247311828 -->
+                                        <!-- 0.02432905 -->
+    <define name="VoltageOfAdc(adc)" value="(0.02454*adc)"/>    
+  </section>
+ 
+  <section name="MISC">
+    <define name="NOMINAL_AIRSPEED" value="15." unit="m/s"/>
+    <define name="CARROT" value="5." unit="s"/>
+    <define name="KILL_MODE_DISTANCE" value="(1.5*MAX_DIST_FROM_HOME)"/>
+    <define name="CONTROL_RATE" value="60" unit="Hz"/>
+<!--    <define name="XBEE_INIT" value="\"ATPL2\rATRN1\rATTT80\r\""/> -->
+<!--    <define name="NO_XBEE_API_INIT" value="TRUE"/> -->
+    <define name="ALT_KALMAN_ENABLED" value="FALSE"/>
+
+    <define name="TRIGGER_DELAY" value="1."/>
+    <define name="DEFAULT_CIRCLE_RADIUS" value="120."/>
+    <define name="MIN_CIRCLE_RADIUS" value="50."/>
+  </section>
+ 
+  <section name="VERTICAL CONTROL" prefix="V_CTL_">
+
+    <define name="POWER_CTL_BAT_NOMINAL" value="11.1" unit="volt"/>
+    <!-- outer loop proportional gain -->
+    <define name="ALTITUDE_PGAIN" value="-0.06"/> <!-- -0.024 -->
+    <!-- outer loop saturation -->
+    <define name="ALTITUDE_MAX_CLIMB" value="2."/>
+
+    <!-- auto throttle inner loop -->
+    <define name="AUTO_THROTTLE_NOMINAL_CRUISE_THROTTLE" value="0.45"/>
+    <define name="AUTO_THROTTLE_MIN_CRUISE_THROTTLE" value="0.35"/>
+    <define name="AUTO_THROTTLE_MAX_CRUISE_THROTTLE" value="0.85"/>
+    <define name="AUTO_THROTTLE_LOITER_TRIM" value="1000"/>
+    <define name="AUTO_THROTTLE_DASH_TRIM" value="-1200"/>
+    <define name="AUTO_THROTTLE_CLIMB_THROTTLE_INCREMENT" value="0.2" 
unit="%/(m/s)"/>
+    <define name="AUTO_THROTTLE_PGAIN" value="-0.023"/> <!-- -0.012 -->
+    <define name="AUTO_THROTTLE_IGAIN" value="0.01"/>
+    <define name="AUTO_THROTTLE_PITCH_OF_VZ_PGAIN" value="0.05"/>
+
+    <!-- auto pitch inner loop -->
+    <define name="AUTO_PITCH_PGAIN" value="-0.06"/> <!-- -0.03 -->
+    <define name="AUTO_PITCH_IGAIN" value="0.0"/>
+    <define name="AUTO_PITCH_MAX_PITCH" value="0.35"/>
+    <define name="AUTO_PITCH_MIN_PITCH" value="-0.35"/>
+
+   <define name="THROTTLE_SLEW" value="0.1"/>
+
+  </section>
+
+  <section name="HORIZONTAL CONTROL" prefix="H_CTL_">
+    <define name="COURSE_PGAIN" value="-0.9"/>
+    <define name="ROLL_MAX_SETPOINT" value="0.70" unit="radians"/> <!-- 0.5 -->
+    <define name="PITCH_MAX_SETPOINT" value="0.5" unit="radians"/>
+    <define name="PITCH_MIN_SETPOINT" value="-0.5" unit="radians"/>
+
+    <define name="ROLL_PGAIN" value="6600."/>
+    <define name="AILERON_OF_THROTTLE" value="0.0"/>
+    <define name="PITCH_PGAIN" value="-5500."/>
+    <define name="PITCH_DGAIN" value="0.4"/>
+
+    <define name="ELEVATOR_OF_ROLL" value="2400"/>
+
+    <!--define name="ROLL_ATTITUDE_GAIN" value="-7500"/>
+    <define name="ROLL_RATE_GAIN" value="-1500"/-->
+
+  </section>
+
+  <section name="NAV">
+    <define name="NAV_PITCH" value="0."/>
+    <define name="NAV_GLIDE_PITCH_TRIM" value="0"/>
+  </section>
+
+  <section name="AGGRESSIVE" prefix="AGR_">
+    <define name="BLEND_START" value="50"/><!-- Altitude Error to Initiate 
Aggressive Climb CANNOT BE ZERO!!-->
+    <define name="BLEND_END" value="15"/><!-- Altitude Error to Blend 
Aggressive to Regular Climb Modes  CANNOT BE ZERO!!-->
+    <define name="CLIMB_THROTTLE" value="0.9"/><!-- Gaz for Aggressive Climb 
-->
+    <define name="CLIMB_PITCH" value="0.35"/><!-- Pitch for Aggressive Climb 
-->
+    <define name="DESCENT_THROTTLE" value="0.05"/><!-- Gaz for Aggressive 
Decent -->
+    <define name="DESCENT_PITCH" value="-0.35"/><!-- Pitch for Aggressive 
Decent -->
+    <define name="CLIMB_NAV_RATIO" value="0.8"/><!-- Percent Navigation for 
Altitude Error Equal to Start Altitude -->
+    <define name="DESCENT_NAV_RATIO" value="1.0"/>
+    </section>
+
+  <section name="FAILSAFE" prefix="FAILSAFE_">
+       <define name="DELAY_WITHOUT_GPS" value="2" unit="s"/>
+       <define name="DEFAULT_THROTTLE" value="0.3" unit="%"/>
+       <define name="DEFAULT_ROLL" value="0.3" unit="rad"/>
+       <define name="DEFAULT_PITCH" value="0.5" unit="rad"/>
+       <define name="HOME_RADIUS" value="100" unit="m"/>
+</section>
+
+ <section name="DATALINK" prefix="DATALINK_">
+    <define name="DEVICE_TYPE" value="XBEE"/>
+    <define name="DEVICE_ADDRESS" value="...."/>
+  </section>
+ 
+ <section name="SIMU">
+    <define name="YAW_RESPONSE_FACTOR" value="0.5"/>
+ </section>
+
+ <makefile>
+CONFIG = \"tiny_2_1.h\"
+
+include $(PAPARAZZI_SRC)/conf/autopilot/tiny.makefile
+
+FLASH_MODE=IAP
+
+ap.CFLAGS +=  -DFBW -DAP -DBOARD_CONFIG=$(CONFIG) -DLED -DTIME_LED=1
+ap.srcs = sys_time.c $(SRC_ARCH)/sys_time_hw.c $(SRC_ARCH)/armVIC.c main_fbw.c 
main_ap.c main.c
+
+ap.srcs += commands.c
+
+ap.CFLAGS += -DACTUATORS=\"servos_4017_hw.h\" -DSERVOS_4017
+ap.srcs += $(SRC_ARCH)/servos_4017_hw.c actuators.c
+
+ap.CFLAGS += -DRADIO_CONTROL
+ap.srcs += radio_control.c $(SRC_ARCH)/ppm_hw.c  
+
+ap.CFLAGS += -DDOWNLINK -DUSE_UART1 -DDOWNLINK_TRANSPORT=XBeeTransport 
-DXBEE_UART=Uart1 -DDATALINK=XBEE -DUART1_BAUD=B57600
+ap.srcs += downlink.c $(SRC_ARCH)/uart_hw.c datalink.c xbee.c
+
+#TRANSPARENT
+#ap.CFLAGS += -DDOWNLINK -DUSE_UART1 -DDOWNLINK_TRANSPORT=PprzTransport 
-DDOWNLINK_FBW_DEVICE=Uart1 -DDOWNLINK_AP_DEVICE=Uart1 -DPPRZ_UART=Uart1 
-DDATALINK=PPRZ -DUART1_BAUD=B9600
+#ap.srcs += downlink.c $(SRC_ARCH)/uart_hw.c datalink.c pprz_transport.c
+
+
+ap.CFLAGS += -DINTER_MCU
+ap.srcs += inter_mcu.c 
+
+ap.CFLAGS += -DADC -DUSE_ADC_0 -DUSE_ADC_1 -DUSE_ADC_2
+ap.srcs += $(SRC_ARCH)/adc_hw.c
+
+ap.CFLAGS += -DGPS -DUBX -DUSE_UART0 -DGPS_LINK=Uart0 -DUART0_BAUD=B38400 
-DGPS_USE_LATLONG
+# -DGPS_LED=2
+ap.srcs += gps_ubx.c gps.c latlong.c
+
+ap.CFLAGS += -DINFRARED -DALT_KALMAN -DWIND_INFO -DWIND_INFO_RET
+ap.srcs += infrared.c estimator.c
+
+ap.CFLAGS += -DNAV -DAGR_CLIMB -DLOITER_TRIM
+ap.srcs += nav.c fw_h_ctl.c fw_v_ctl.c
+
+ap.srcs += nav_line.c
+ap.srcs += nav_survey_rectangle.c
+
+ap.srcs += humid_sht.c
+ap.CFLAGS += -DUSE_HUMID_SHT -DDAT_PIN=3  -DSCK_PIN=2
+
+ap.srcs += baro_scp.c
+ap.CFLAGS += -DUSE_BARO_SCP
+
+ap.srcs += joystick.c
+ap.CFLAGS += -DUSE_JOYSTICK
+
+# Config for SITL simulation
+include $(PAPARAZZI_SRC)/conf/autopilot/sitl.makefile
+sim.CFLAGS += -DBOARD_CONFIG=\"tiny.h\" -DAGR_CLIMB -DLOITER_TRIM -DALT_KALMAN
+sim.srcs += nav_line.c nav_survey_rectangle.c
+
+sim.srcs += joystick.c
+sim.CFLAGS += -DUSE_JOYSTICK
+
+
+  </makefile>
+</airframe>

Added: paparazzi3/trunk/conf/airframes/mm/fixed-wing/merlin.xml
===================================================================
--- paparazzi3/trunk/conf/airframes/mm/fixed-wing/merlin.xml                    
        (rev 0)
+++ paparazzi3/trunk/conf/airframes/mm/fixed-wing/merlin.xml    2010-05-01 
15:28:22 UTC (rev 4897)
@@ -0,0 +1,239 @@
+<!DOCTYPE airframe SYSTEM "../../airframe.dtd">
+
+<!-- Merlin, Himax HC2212-1180
+     Tiny 2.11
+     PerkinElmer TPS334 IR Sensors
+     Tilted infrared sensor
+     XBee modem
+     LEA 4P (set to POSLLH)
+-->
+
+<airframe name="Merlin">
+
+<!-- commands section -->
+  <servos>
+    <servo name="AILERON_RIGHT" no="0" min="1900" neutral="1500" max="1100"/>
+    <servo name="AILERON_LEFT"  no="2" min="1900" neutral="1500" max="1100"/>
+    <servo name="ELEVATOR"      no="6" min="1100" neutral="1500" max="1900"/>
+    <servo name="MOTOR"         no="7" min="1000" neutral="1000" max="2000"/>
+  </servos>
+
+  <commands>
+    <axis name="THROTTLE"  failsafe_value="0"/>
+    <axis name="ROLL"      failsafe_value="0"/>
+    <axis name="PITCH"     failsafe_value="0"/>
+  </commands>
+
+  <rc_commands>
+    <set command="THROTTLE" value="@THROTTLE"/>
+    <set command="ROLL"     value="@ROLL"/>
+    <set command="PITCH"    value="@PITCH"/>
+  </rc_commands>
+
+  <section name="MIXER">
+    <define name="AILERON_DIFF" value="0.8"/>
+  </section>
+
+  <command_laws>
+    <set servo="MOTOR" value="@THROTTLE"/>
+    <set servo="ELEVATOR" value="@PITCH"/>
+    <let var="roll" value="@ROLL"/>
+    <set servo="AILERON_LEFT" value="($roll > 0 ? 1 : AILERON_DIFF) * $roll"/>
+    <set servo="AILERON_RIGHT" value="($roll > 0 ? AILERON_DIFF : 1) * $roll"/>
+  </command_laws>
+
+  <section name="AUTO1" prefix="AUTO1_">
+    <define name="MAX_ROLL" value="0.85"/>
+    <define name="MAX_PITCH" value="0.6"/>
+  </section>
+
+  <section name="adc" prefix="ADC_CHANNEL_">
+    <define name="IR1" value="ADC_1"/>
+    <define name="IR2" value="ADC_2"/>
+    <define name="IR_TOP" value="ADC_0"/>
+    <define name="IR_NB_SAMPLES" value="16"/>
+  </section>
+
+  <section name="INFRARED" prefix="IR_">
+    <define name="ADC_IR1_NEUTRAL" value="512"/>
+    <define name="ADC_IR2_NEUTRAL" value="512"/>
+    <define name="ADC_TOP_NEUTRAL" value="512"/>
+
+    <define name="CORRECTION_UP" value="1."/>
+    <define name="CORRECTION_DOWN" value="1."/>
+    <define name="CORRECTION_LEFT" value="1."/>
+    <define name="CORRECTION_RIGHT" value="1."/>
+
+    <define name="LATERAL_CORRECTION" value="-1"/>
+    <define name="LONGITUDINAL_CORRECTION" value="1"/>
+    <define name="VERTICAL_CORRECTION" value="1.7"/>
+
+    <define name="HORIZ_SENSOR_TILTED" value="1"/>
+    <define name="IR1_SIGN" value="-1"/>
+    <define name="IR2_SIGN" value="1"/>
+    <define name="TOP_SIGN" value="1"/>
+
+    <define name="ROLL_NEUTRAL_DEFAULT" value="0" unit="deg"/>
+    <define name="PITCH_NEUTRAL_DEFAULT" value="0" unit="deg"/>
+  </section>
+
+  <section name="BAT">
+    <define name="MILLIAMP_AT_FULL_THROTTLE" value="20000"/>
+    <define name="CATASTROPHIC_BAT_LEVEL" value="9.3" unit="V"/>
+                                        <!-- 0.0247311828 -->
+                                        <!-- 0.02432905 -->
+    <define name="VoltageOfAdc(adc)" value="(0.02454*adc)"/>    
+  </section>
+ 
+  <section name="MISC">
+    <define name="MINIMUM_AIRSPEED" value="10." unit="m/s"/>
+    <define name="NOMINAL_AIRSPEED" value="12." unit="m/s"/>
+    <define name="MAXIMUM_AIRSPEED" value="18." unit="m/s"/>
+    <define name="CARROT" value="5." unit="s"/>
+    <define name="KILL_MODE_DISTANCE" value="(1.5*MAX_DIST_FROM_HOME)"/>
+    <define name="CONTROL_RATE" value="60" unit="Hz"/>
+<!--    <define name="XBEE_INIT" value="&quot;ATPL2\rATRN1\rATTT80\r&quot;"/> 
-->
+<!--    <define name="NO_XBEE_API_INIT" value="TRUE"/> -->
+    <define name="ALT_KALMAN_ENABLED" value="FALSE"/>
+
+    <define name="TRIGGER_DELAY" value="1."/>
+    <define name="DEFAULT_CIRCLE_RADIUS" value="120."/>
+    <define name="MIN_CIRCLE_RADIUS" value="50."/>
+  </section>
+
+
+  <section name="VERTICAL CONTROL" prefix="V_CTL_">
+    <define name="POWER_CTL_BAT_NOMINAL" value="11.1" unit="volt"/>  
+    <!-- outer loop proportional gain -->
+    <define name="ALTITUDE_PGAIN" value="-0.06"/>
+    <!-- outer loop saturation -->
+    <define name="ALTITUDE_MAX_CLIMB" value="2."/>
+
+    <!-- auto throttle inner loop -->
+    <define name="AUTO_THROTTLE_NOMINAL_CRUISE_THROTTLE" value="0.45"/>
+    <define name="AUTO_THROTTLE_MIN_CRUISE_THROTTLE" value="0.25"/>
+    <define name="AUTO_THROTTLE_MAX_CRUISE_THROTTLE" value="0.85"/>
+    <define name="AUTO_THROTTLE_LOITER_TRIM" value="1000"/>
+    <define name="AUTO_THROTTLE_DASH_TRIM" value="-1200"/>
+    <define name="AUTO_THROTTLE_CLIMB_THROTTLE_INCREMENT" value="0.2" 
unit="%/(m/s)"/>
+    <define name="AUTO_THROTTLE_PGAIN" value="-0.023"/>
+    <define name="AUTO_THROTTLE_IGAIN" value="0.1"/>
+    <define name="AUTO_THROTTLE_PITCH_OF_VZ_PGAIN" value="0.05"/>
+
+    <!-- auto pitch inner loop -->
+    <define name="AUTO_PITCH_PGAIN" value="-0.06"/>
+    <define name="AUTO_PITCH_IGAIN" value="0.08"/>
+    <define name="AUTO_PITCH_MAX_PITCH" value="0.35"/>
+    <define name="AUTO_PITCH_MIN_PITCH" value="-0.35"/>
+
+   <define name="THROTTLE_SLEW" value="0.1"/>
+
+  </section>
+
+
+  <section name="HORIZONTAL CONTROL" prefix="H_CTL_">
+    <define name="COURSE_PGAIN" value="-1.0"/>
+    <define name="ROLL_MAX_SETPOINT" value="0.60" unit="radians"/>
+    <define name="PITCH_MAX_SETPOINT" value="0.5" unit="radians"/>
+    <define name="PITCH_MIN_SETPOINT" value="-0.5" unit="radians"/>
+
+    <define name="ROLL_PGAIN" value="6000."/>
+    <define name="AILERON_OF_THROTTLE" value="0.0"/>
+    <define name="PITCH_PGAIN" value="-9000."/>
+    <define name="PITCH_DGAIN" value="1.5"/>
+
+    <define name="ELEVATOR_OF_ROLL" value="1500"/>
+    
+    <!--define name="ROLL_ATTITUDE_GAIN" value="-5900"/>
+    <define name="ROLL_RATE_GAIN" value="-2900"/-->
+ </section>
+
+  <section name="NAV">
+    <define name="NAV_PITCH" value="0."/>
+    <define name="NAV_GLIDE_PITCH_TRIM" value="0"/>
+  </section>
+
+  <section name="AGGRESSIVE" prefix="AGR_">
+    <define name="BLEND_START" value="50"/><!-- Altitude Error to Initiate 
Aggressive Climb CANNOT BE ZERO!!-->
+    <define name="BLEND_END" value="15"/><!-- Altitude Error to Blend 
Aggressive to Regular Climb Modes  CANNOT BE ZERO!!-->
+    <define name="CLIMB_THROTTLE" value="0.9"/><!-- Gaz for Aggressive Climb 
-->
+    <define name="CLIMB_PITCH" value="0.35"/><!-- Pitch for Aggressive Climb 
-->
+    <define name="DESCENT_THROTTLE" value="0.05"/><!-- Gaz for Aggressive 
Decent -->
+    <define name="DESCENT_PITCH" value="-0.35"/><!-- Pitch for Aggressive 
Decent -->
+    <define name="CLIMB_NAV_RATIO" value="0.8"/><!-- Percent Navigation for 
Altitude Error Equal to Start Altitude -->
+    <define name="DESCENT_NAV_RATIO" value="1.0"/>
+    </section>
+
+  <section name="FAILSAFE" prefix="FAILSAFE_">
+    <define name="DELAY_WITHOUT_GPS" value="2" unit="s"/>
+    <define name="DEFAULT_THROTTLE" value="0.3" unit="%"/>
+    <define name="DEFAULT_ROLL" value="0.17" unit="rad"/>
+    <define name="DEFAULT_PITCH" value="0.08" unit="rad"/>
+    <define name="HOME_RADIUS" value="100" unit="m"/>
+  </section>
+
+  <section name="DATALINK" prefix="DATALINK_">
+    <define name="DEVICE_TYPE" value="XBEE"/>
+    <define name="DEVICE_ADDRESS" value="...."/>
+  </section>
+ <makefile>
+CONFIG = \"tiny_2_1.h\"
+
+include $(PAPARAZZI_SRC)/conf/autopilot/tiny.makefile
+
+FLASH_MODE=IAP
+
+ap.CFLAGS +=  -DFBW -DAP -DBOARD_CONFIG=$(CONFIG) -DLED -DTIME_LED=1
+ap.srcs = sys_time.c $(SRC_ARCH)/sys_time_hw.c $(SRC_ARCH)/armVIC.c main_fbw.c 
main_ap.c main.c
+
+ap.srcs += commands.c
+
+ap.CFLAGS += -DACTUATORS=\"servos_4017_hw.h\" -DSERVOS_4017
+ap.srcs += $(SRC_ARCH)/servos_4017_hw.c actuators.c
+
+ap.CFLAGS += -DRADIO_CONTROL -DUSE_RC_TELEMETRY
+ap.srcs += radio_control.c ppm_telemetry.c
+
+ap.CFLAGS += -DDOWNLINK -DUSE_UART1 -DDOWNLINK_TRANSPORT=XBeeTransport 
-DXBEE_UART=Uart1 -DDATALINK=XBEE -DUART1_BAUD=B57600
+ap.srcs += downlink.c $(SRC_ARCH)/uart_hw.c datalink.c xbee.c
+
+#TRANSPARENT
+#ap.CFLAGS += -DDOWNLINK -DUSE_UART1 -DDOWNLINK_TRANSPORT=PprzTransport 
-DDOWNLINK_FBW_DEVICE=Uart1 -#DDOWNLINK_AP_DEVICE=Uart1 -DPPRZ_UART=Uart1 
-DDATALINK=PPRZ -DUART1_BAUD=B9600
+#ap.srcs += downlink.c $(SRC_ARCH)/uart_hw.c datalink.c pprz_transport.c
+
+ap.CFLAGS += -DINTER_MCU
+ap.srcs += inter_mcu.c 
+
+ap.CFLAGS += -DADC -DUSE_ADC_0 -DUSE_ADC_1 -DUSE_ADC_2 -DUSE_ADC_3
+ap.srcs += $(SRC_ARCH)/adc_hw.c
+
+ap.CFLAGS += -DGPS -DUBX -DUSE_UART0 -DGPS_LINK=Uart0 -DUART0_BAUD=B38400
+# -DGPS_USE_LATLONG
+ap.srcs += gps_ubx.c gps.c latlong.c
+
+ap.CFLAGS += -DINFRARED -DALT_KALMAN -DWIND_INFO -DWIND_INFO_RET
+ap.srcs += infrared.c estimator.c
+
+ap.CFLAGS += -DNAV -DAGR_CLIMB -DLOITER_TRIM
+ap.srcs += nav.c fw_h_ctl.c fw_v_ctl.c
+
+ap.srcs += nav_line.c
+ap.srcs += nav_survey_rectangle.c
+
+ap.srcs += snav.c
+
+# Config for SITL simulation
+# include $(PAPARAZZI_SRC)/conf/autopilot/sitl.makefile
+sim.ARCHDIR = $(ARCHI)
+sim.ARCH = sitl
+sim.TARGET = autopilot
+sim.TARGETDIR = autopilot
+sim.CFLAGS += -DSITL -DAP -DFBW -DRADIO_CONTROL -DINTER_MCU -DDOWNLINK 
-DDOWNLINK_TRANSPORT=IvyTransport -DINFRARED -DNAV -DLED -DWIND_INFO
+sim.srcs = latlong.c radio_control.c downlink.c commands.c gps.c inter_mcu.c 
infrared.c fw_h_ctl.c fw_v_ctl.c nav.c estimator.c sys_time.c main_fbw.c 
main_ap.c datalink.c $(SRC_ARCH)/ppm_hw.c $(SRC_ARCH)/sim_gps.c 
$(SRC_ARCH)/sim_ir.c $(SRC_ARCH)/sim_ap.c $(SRC_ARCH)/ivy_transport.c 
$(SRC_ARCH)/sim_adc_generic.c $(SRC_ARCH)/led_hw.c
+
+sim.CFLAGS += -DBOARD_CONFIG=\"tiny.h\" -DAGR_CLIMB -DLOITER_TRIM -DALT_KALMAN
+sim.srcs += nav_line.c nav_survey_rectangle.c
+
+  </makefile>
+</airframe>
+

Copied: paparazzi3/trunk/conf/airframes/mm/fixed-wing/miniwing.xml (from rev 
4848, paparazzi3/trunk/conf/airframes/miniwing.xml)
===================================================================
--- paparazzi3/trunk/conf/airframes/mm/fixed-wing/miniwing.xml                  
        (rev 0)
+++ paparazzi3/trunk/conf/airframes/mm/fixed-wing/miniwing.xml  2010-05-01 
15:28:22 UTC (rev 4897)
@@ -0,0 +1,227 @@
+<!DOCTYPE airframe SYSTEM "airframe.dtd">
+
+<!-- mini wing, 3A brushless
+     Tiny 2.11 board, LEA 5H
+     PerkinElmer TPS334 IR Sensors
+     Tilted infrared sensor
+     XBee modem
+-->
+
+<airframe name="mini wing">
+
+<!-- commands section -->
+  <servos>
+    <servo name="MOTOR" no="0" min="1000" neutral="1000" max="2000"/>
+    <servo name="AILEVON_LEFT"  no="2" min="1720" neutral="1341" max="1000"/>
+    <servo name="AILEVON_RIGHT" no="6" min="1220" neutral="1523" max="1840"/>
+  </servos>
+
+  <commands>
+    <axis name="THROTTLE" failsafe_value="0"/>
+    <axis name="ROLL" failsafe_value="0"/>
+    <axis name="PITCH" failsafe_value="0"/>
+  </commands>
+
+  <rc_commands>
+    <set command="THROTTLE" value="@THROTTLE"/>
+    <set command="ROLL" value="@ROLL"/>
+    <set command="PITCH" value="@PITCH"/>
+  </rc_commands>
+
+  <section name="MIXER">
+    <define name="AILEVON_AILERON_RATE" value="0.45"/>
+    <define name="AILEVON_ELEVATOR_RATE" value="0.8"/>
+  </section>
+
+  <command_laws>
+    <let var="aileron" value="@ROLL  * AILEVON_AILERON_RATE"/>
+    <let var="elevator" value="@PITCH * AILEVON_ELEVATOR_RATE"/>  
+    <set servo="MOTOR" value="@THROTTLE"/>
+    <set servo="AILEVON_LEFT" value="$elevator + $aileron"/>
+    <set servo="AILEVON_RIGHT" value="$elevator - $aileron"/>
+  </command_laws>
+
+  <section name="AUTO1" prefix="AUTO1_">
+    <define name="MAX_ROLL" value="0.85"/>
+    <define name="MAX_PITCH" value="0.6"/>
+  </section>
+
+  <section name="adc" prefix="ADC_CHANNEL_">
+    <define name="IR1" value="ADC_1"/>
+    <define name="IR2" value="ADC_2"/>
+    <define name="IR_TOP" value="ADC_0"/>
+    <define name="ACC_X" value="ADC_3"/>
+    <define name="ACC_Y" value="ADC_4"/>
+    <define name="IR_NB_SAMPLES" value="16"/>
+  </section>
+
+  <section name="INFRARED" prefix="IR_">
+    <define name="ADC_IR1_NEUTRAL" value="512"/>
+    <define name="ADC_IR2_NEUTRAL" value="512"/>
+    <define name="ADC_TOP_NEUTRAL" value="512"/>
+
+    <define name="CORRECTION_UP" value="1."/>
+    <define name="CORRECTION_DOWN" value="1."/>
+    <define name="CORRECTION_LEFT" value="1."/>
+    <define name="CORRECTION_RIGHT" value="1."/>
+
+    <define name="LATERAL_CORRECTION" value="-1"/>
+    <define name="LONGITUDINAL_CORRECTION" value="1"/>
+    <define name="VERTICAL_CORRECTION" value="1.5"/>
+
+    <define name="HORIZ_SENSOR_TILTED" value="1"/>
+    <define name="IR1_SIGN" value="-1"/>
+    <define name="IR2_SIGN" value="1"/>
+    <define name="TOP_SIGN" value="-1"/>
+
+    <define name="ROLL_NEUTRAL_DEFAULT" value="0" unit="deg"/>
+    <define name="PITCH_NEUTRAL_DEFAULT" value="3.4" unit="deg"/>
+  </section>
+
+  <section name="BAT">
+    <define name="MILLIAMP_AT_FULL_THROTTLE" value="2100."/>
+    <define name="CATASTROPHIC_BAT_LEVEL" value="6.2" unit="V"/>
+    <define name="VoltageOfAdc(adc)" value="(0.02454*adc)"/>    
+  </section>
+ 
+  <section name="MISC">
+    <define name="NOMINAL_AIRSPEED" value="12." unit="m/s"/>
+    <define name="CARROT" value="5." unit="s"/>
+    <define name="KILL_MODE_DISTANCE" value="(1.5*MAX_DIST_FROM_HOME)"/>
+    <define name="CONTROL_RATE" value="60" unit="Hz"/>
+<!--    <define name="XBEE_INIT" value="&quot;ATPL2\rATRN1\rATTT80\r&quot;"/> 
-->
+<!--    <define name="NO_XBEE_API_INIT" value="TRUE"/> -->
+    <define name="ALT_KALMAN_ENABLED" value="FALSE"/>
+
+    <define name="TRIGGER_DELAY" value="1."/>
+    <define name="DEFAULT_CIRCLE_RADIUS" value="60."/>
+    <define name="MIN_CIRCLE_RADIUS" value="50."/>
+  </section>
+ 
+  <section name="VERTICAL CONTROL" prefix="V_CTL_">
+
+    <define name="POWER_CTL_BAT_NOMINAL" value="7.4" unit="volt"/>
+    <!-- outer loop proportional gain -->
+    <define name="ALTITUDE_PGAIN" value="-0.06"/> <!-- -0.024 -->
+    <!-- outer loop saturation -->
+    <define name="ALTITUDE_MAX_CLIMB" value="2."/>
+
+    <!-- auto throttle inner loop -->
+    <define name="AUTO_THROTTLE_NOMINAL_CRUISE_THROTTLE" value="0.7"/>
+    <define name="AUTO_THROTTLE_MIN_CRUISE_THROTTLE" value="0.35"/>
+    <define name="AUTO_THROTTLE_MAX_CRUISE_THROTTLE" value="0.80"/>
+    <define name="AUTO_THROTTLE_LOITER_TRIM" value="50"/>
+    <define name="AUTO_THROTTLE_DASH_TRIM" value="-60"/>
+    <define name="AUTO_THROTTLE_CLIMB_THROTTLE_INCREMENT" value="0.2" 
unit="%/(m/s)"/>
+    <define name="AUTO_THROTTLE_PGAIN" value="-0.023"/> <!-- -0.012 -->
+    <define name="AUTO_THROTTLE_IGAIN" value="0.11"/>
+    <define name="AUTO_THROTTLE_PITCH_OF_VZ_PGAIN" value="0.1"/>
+
+    <!-- auto pitch inner loop -->
+    <define name="AUTO_PITCH_PGAIN" value="-0.06"/> <!-- -0.03 -->
+    <define name="AUTO_PITCH_IGAIN" value="0.0"/>
+    <define name="AUTO_PITCH_MAX_PITCH" value="0.35"/>
+    <define name="AUTO_PITCH_MIN_PITCH" value="-0.35"/>
+
+   <define name="THROTTLE_SLEW" value="0.1"/>
+
+  </section>
+
+  <section name="HORIZONTAL CONTROL" prefix="H_CTL_">
+    <define name="COURSE_PGAIN" value="-0.8"/>
+    <define name="ROLL_MAX_SETPOINT" value="0.62" unit="radians"/> <!-- 0.5 -->
+    <define name="PITCH_MAX_SETPOINT" value="0.5" unit="radians"/>
+    <define name="PITCH_MIN_SETPOINT" value="-0.5" unit="radians"/>
+
+    <define name="ROLL_PGAIN" value="6600."/>
+    <define name="AILERON_OF_THROTTLE" value="0.0"/>
+    <define name="PITCH_PGAIN" value="-5500."/>
+    <define name="PITCH_DGAIN" value="0.4"/>
+
+    <define name="ELEVATOR_OF_ROLL" value="1200"/>
+
+    <!--define name="ROLL_ATTITUDE_GAIN" value="-7500"/>
+    <define name="ROLL_RATE_GAIN" value="-1500"/-->
+
+  </section>
+
+  <section name="NAV">
+    <define name="NAV_PITCH" value="0."/>
+    <define name="NAV_GLIDE_PITCH_TRIM" value="0"/>
+  </section>
+
+  <section name="AGGRESSIVE" prefix="AGR_">
+    <define name="BLEND_START" value="50"/><!-- Altitude Error to Initiate 
Aggressive Climb CANNOT BE ZERO!!-->
+    <define name="BLEND_END" value="15"/><!-- Altitude Error to Blend 
Aggressive to Regular Climb Modes  CANNOT BE ZERO!!-->
+    <define name="CLIMB_THROTTLE" value="0.9"/><!-- Gaz for Aggressive Climb 
-->
+    <define name="CLIMB_PITCH" value="0.35"/><!-- Pitch for Aggressive Climb 
-->
+    <define name="DESCENT_THROTTLE" value="0.05"/><!-- Gaz for Aggressive 
Decent -->
+    <define name="DESCENT_PITCH" value="-0.35"/><!-- Pitch for Aggressive 
Decent -->
+    <define name="CLIMB_NAV_RATIO" value="0.8"/><!-- Percent Navigation for 
Altitude Error Equal to Start Altitude -->
+    <define name="DESCENT_NAV_RATIO" value="1.0"/>
+    </section>
+
+  <section name="FAILSAFE" prefix="FAILSAFE_">
+       <define name="DELAY_WITHOUT_GPS" value="2" unit="s"/>
+       <define name="DEFAULT_THROTTLE" value="0.3" unit="%"/>
+       <define name="DEFAULT_ROLL" value="0.3" unit="rad"/>
+       <define name="DEFAULT_PITCH" value="0.5" unit="rad"/>
+       <define name="HOME_RADIUS" value="100" unit="m"/>
+</section>
+
+ <section name="DATALINK" prefix="DATALINK_">
+    <define name="DEVICE_TYPE" value="XBEE"/>
+    <define name="DEVICE_ADDRESS" value="...."/>
+  </section>
+ 
+ <makefile>
+CONFIG = \"tiny_2_1.h\"
+
+include $(PAPARAZZI_SRC)/conf/autopilot/tiny.makefile
+
+FLASH_MODE=IAP
+
+ap.CFLAGS +=  -DFBW -DAP -DBOARD_CONFIG=$(CONFIG) -DLED -DTIME_LED=1
+ap.srcs = sys_time.c $(SRC_ARCH)/sys_time_hw.c $(SRC_ARCH)/armVIC.c main_fbw.c 
main_ap.c main.c
+
+ap.srcs += commands.c
+
+ap.CFLAGS += -DACTUATORS=\"servos_4017_hw.h\" -DSERVOS_4017
+ap.srcs += $(SRC_ARCH)/servos_4017_hw.c actuators.c
+
+ap.CFLAGS += -DRADIO_CONTROL -DUSE_RC_TELEMETRY
+ap.srcs += radio_control.c ppm_telemetry.c
+
+ap.CFLAGS += -DDOWNLINK -DUSE_UART1 -DDOWNLINK_TRANSPORT=XBeeTransport 
-DXBEE_UART=Uart1 -DDATALINK=XBEE -DUART1_BAUD=B57600
+ap.srcs += downlink.c $(SRC_ARCH)/uart_hw.c datalink.c xbee.c
+
+ap.CFLAGS += -DINTER_MCU
+ap.srcs += inter_mcu.c 
+
+ap.CFLAGS += -DADC -DUSE_ADC_0 -DUSE_ADC_1 -DUSE_ADC_2
+ap.srcs += $(SRC_ARCH)/adc_hw.c
+
+ap.CFLAGS += -DGPS -DUBX -DUSE_UART0 -DGPS_LINK=Uart0 -DUART0_BAUD=B38400 
-DGPS_USE_LATLONG
+# -DGPS_LED=2
+ap.srcs += gps_ubx.c gps.c latlong.c
+
+ap.CFLAGS += -DINFRARED -DALT_KALMAN -DWIND_INFO -DWIND_INFO_RET
+ap.srcs += infrared.c estimator.c
+
+ap.CFLAGS += -DNAV -DAGR_CLIMB -DLOITER_TRIM
+ap.srcs += nav.c fw_h_ctl.c fw_v_ctl.c
+
+ap.srcs += nav_line.c
+ap.srcs += nav_survey_rectangle.c
+
+#ap.CFLAGS += -DTELEMETRY_MODE_FBW=1
+
+ap.CFLAGS += -DUSE_ACCEL_MEMSIC -DUSE_ADC_3 -DUSE_ADC_4
+
+# Config for SITL simulation
+include $(PAPARAZZI_SRC)/conf/autopilot/sitl.makefile
+sim.CFLAGS += -DBOARD_CONFIG=\"tiny.h\" -DAGR_CLIMB -DLOITER_TRIM -DALT_KALMAN
+sim.srcs += nav_line.c nav_survey_rectangle.c
+
+  </makefile>
+</airframe>
[Prev in Thread]
Current Thread
[Next in Thread]
[paparazzi-commits] [4897] new gfi ac, moving, Martin Mueller <=
Next by Date: [paparazzi-commits] [4898] adding support for Lisa/L dual barometer
Next by thread: [paparazzi-commits] [4898] adding support for Lisa/L dual barometer
Index(es):
- Date
- Thread