[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[paparazzi-commits] [4911]
|
From: |
antoine drouin |
|
Subject: |
[paparazzi-commits] [4911] |
|
Date: |
Wed, 26 May 2010 20:32:53 +0000 |
Revision: 4911
http://svn.sv.gnu.org/viewvc/?view=rev&root=paparazzi&revision=4911
Author: poine
Date: 2010-05-26 20:32:52 +0000 (Wed, 26 May 2010)
Log Message:
-----------
Added Paths:
-----------
paparazzi3/trunk/conf/airframes/Poine/booz2_a7.xml
Added: paparazzi3/trunk/conf/airframes/Poine/booz2_a7.xml
===================================================================
--- paparazzi3/trunk/conf/airframes/Poine/booz2_a7.xml
(rev 0)
+++ paparazzi3/trunk/conf/airframes/Poine/booz2_a7.xml 2010-05-26 20:32:52 UTC
(rev 4911)
@@ -0,0 +1,208 @@
+<!-- this is an asctec frame equiped with Lisa/L#3 and asctec V2 controllers
-->
+
+<airframe name="booz2_a7">
+
+ <servos min="0" neutral="0" max="0xff">
+ <servo name="FRONT" no="0" min="0" neutral="0" max="255"/>
+ <servo name="BACK" no="1" min="0" neutral="0" max="255"/>
+ <servo name="LEFT" no="2" min="0" neutral="0" max="255"/>
+ <servo name="RIGHT" no="3" min="0" neutral="0" max="255"/>
+ </servos>
+
+ <commands>
+ <axis name="PITCH" failsafe_value="0"/>
+ <axis name="ROLL" failsafe_value="0"/>
+ <axis name="YAW" failsafe_value="0"/>
+ <axis name="THRUST" failsafe_value="0"/>
+ </commands>
+
+
+ <section name="SUPERVISION" prefix="SUPERVISION_">
+ <define name="MIN_MOTOR" value="3"/>
+ <define name="MAX_MOTOR" value="200"/>
+ <define name="TRIM_A" value="0"/>
+ <define name="TRIM_E" value="0"/>
+ <define name="TRIM_R" value="0"/>
+ <define name="NB_MOTOR" value="4"/>
+ <define name="SCALE" value="256"/>
+ <define name="ROLL_COEF" value="{ 0 , 0, 256, -256 }"/>
+ <define name="PITCH_COEF" value="{ 256, -256, 0, 0 }"/>
+ <define name="YAW_COEF" value="{ 256, 256, -256, -256 }"/>
+ <define name="THRUST_COEF" value="{ 256, 256, 256, 256 }"/>
+ </section>
+
+ <section name="IMU" prefix="IMU_">
+
+ <define name="GYRO_P_NEUTRAL" value="31948"/>
+ <define name="GYRO_Q_NEUTRAL" value="31834"/>
+ <define name="GYRO_R_NEUTRAL" value="32687"/>
+
+ <define name="GYRO_P_SENS" value=" 1.101357422" integer="16"/>
+ <define name="GYRO_Q_SENS" value="-1.122670898" integer="16"/>
+ <define name="GYRO_R_SENS" value="-1.104890137" integer="16"/>
+
+
+ <define name="ACCEL_X_SENS" value="-2.58273701242" integer="16"/>
+ <define name="ACCEL_Y_SENS" value="-2.54076215332" integer="16"/>
+ <define name="ACCEL_Z_SENS" value="-2.57633620646" integer="16"/>
+
+ <define name="ACCEL_X_NEUTRAL" value="32857"/>
+ <define name="ACCEL_Y_NEUTRAL" value="32429"/>
+ <define name="ACCEL_Z_NEUTRAL" value="32593"/>
+
+ <define name="MAG_X_SENS" value=" 5.32718104135" integer="16"/>
+ <define name="MAG_Y_SENS" value="-4.87857821202" integer="16"/>
+ <define name="MAG_Z_SENS" value="-3.11986612709" integer="16"/>
+
+ <define name="MAG_X_NEUTRAL" value="-43"/>
+ <define name="MAG_Y_NEUTRAL" value=" 49"/>
+ <define name="MAG_Z_NEUTRAL" value="-66"/>
+
+ <define name="BODY_TO_IMU_PHI" value="RadOfDeg( 0.)"/>
+ <define name="BODY_TO_IMU_THETA" value="RadOfDeg( 0.)"/>
+ <define name="BODY_TO_IMU_PSI" value="RadOfDeg( 45.)"/>
+
+ </section>
+
+ <section name="AUTOPILOT">
+ <define name="BOOZ2_MODE_MANUAL" value="BOOZ2_AP_MODE_ATTITUDE_DIRECT"/>
+ <define name="BOOZ2_MODE_AUTO1" value="BOOZ2_AP_MODE_ATTITUDE_DIRECT"/>
+ <define name="BOOZ2_MODE_AUTO2" value="BOOZ2_AP_MODE_ATTITUDE_DIRECT"/>
+ </section>
+
+ <section name="BAT">
+ <define name="MILLIAMP_PER_PERCENT" value="0.86"/>
+ <define name="CATASTROPHIC_BAT_LEVEL" value="9.3" unit="V"/>
+ <define name="BATTERY_SENS" value="0.48" integer="16"/>
+ </section>
+
+
+ <section name="STABILIZATION_RATE" prefix="BOOZ_STABILIZATION_RATE_">
+
+ <define name="SP_MAX_P" value="10000"/>
+ <define name="SP_MAX_Q" value="10000"/>
+ <define name="SP_MAX_R" value="10000"/>
+
+ <define name="GAIN_P" value="-400"/>
+ <define name="GAIN_Q" value="-400"/>
+ <define name="GAIN_R" value="-350"/>
+
+ </section>
+
+ <section name="STABILIZATION_ATTITUDE" prefix="BOOZ_STABILIZATION_ATTITUDE_">
+
+ <!-- setpoints -->
+ <define name="SP_MAX_PHI" value="RadOfDeg(45.)"/>
+ <define name="SP_MAX_THETA" value="RadOfDeg(45.)"/>
+ <define name="SP_MAX_R" value="RadOfDeg(90.)"/>
+ <define name="DEADBAND_R" value="250"/>
+
+ <!-- reference -->
+ <define name="REF_OMEGA_P" value="RadOfDeg(800)"/>
+ <define name="REF_ZETA_P" value="0.85"/>
+ <define name="REF_MAX_P" value="RadOfDeg(300.)"/>
+ <define name="REF_MAX_PDOT" value="RadOfDeg(7000.)"/>
+
+ <define name="REF_OMEGA_Q" value="RadOfDeg(800)"/>
+ <define name="REF_ZETA_Q" value="0.85"/>
+ <define name="REF_MAX_Q" value="RadOfDeg(300.)"/>
+ <define name="REF_MAX_QDOT" value="RadOfDeg(7000.)"/>
+
+ <define name="REF_OMEGA_R" value="RadOfDeg(500)"/>
+ <define name="REF_ZETA_R" value="0.85"/>
+ <define name="REF_MAX_R" value="RadOfDeg(180.)"/>
+ <define name="REF_MAX_RDOT" value="RadOfDeg(1800.)"/>
+
+ <!-- feedback -->
+ <define name="PHI_PGAIN" value="-2000"/>
+ <define name="PHI_DGAIN" value="-400"/>
+ <define name="PHI_IGAIN" value="-200"/>
+
+ <define name="THETA_PGAIN" value="-2000"/>
+ <define name="THETA_DGAIN" value="-400"/>
+ <define name="THETA_IGAIN" value="-400"/>
+
+ <define name="PSI_PGAIN" value="-1000"/>
+ <define name="PSI_DGAIN" value="-350"/>
+ <define name="PSI_IGAIN" value="-10"/>
+
+ <!-- feedforward -->
+ <define name="PHI_DDGAIN" value=" 300"/>
+ <define name="THETA_DDGAIN" value=" 300"/>
+ <define name="PSI_DDGAIN" value=" 300"/>
+
+ </section>
+
+ <section name="INS" prefix="BOOZ_INS_">
+ <define name="BARO_SENS" value="15." integer="16"/>
+ </section>
+
+ <section name="GUIDANCE_V" prefix="BOOZ2_GUIDANCE_V_">
+ <define name="MIN_ERR_Z" value="POS_BFP_OF_REAL(-10.)"/>
+ <define name="MAX_ERR_Z" value="POS_BFP_OF_REAL( 10.)"/>
+ <define name="MIN_ERR_ZD" value="SPEED_BFP_OF_REAL(-10.)"/>
+ <define name="MAX_ERR_ZD" value="SPEED_BFP_OF_REAL( 10.)"/>
+ <define name="MAX_SUM_ERR" value="2000000"/>
+ <define name="HOVER_KP" value="-500"/>
+ <define name="HOVER_KD" value="-200"/>
+ <define name="HOVER_KI" value="-100"/>
+ <!-- 1.5m/s for full stick : BOOZ_SPEED_I_OF_F(1.5) / (MAX_PPRZ/2) -->
+ <define name="RC_CLIMB_COEF" value ="163"/>
+ <!-- BOOZ_SPEED_I_OF_F(1.5) * 20% -->
+ <define name="RC_CLIMB_DEAD_BAND" value ="160000"/>
+ <define name="INV_M" value ="0.2"/>
+ </section>
+
+
+ <section name="GUIDANCE_H" prefix="BOOZ2_GUIDANCE_H_">
+ <define name="PGAIN" value="-100"/>
+ <define name="DGAIN" value="-100"/>
+ <define name="IGAIN" value="-0"/>
+ </section>
+
+ <section name="MISC">
+ <define name="BOOZ2_FACE_REINJ_1" value="1024"/>
+ </section>
+
+
+ <makefile>
+
+
+
+USER =
+#HOST = 10.31.4.22
+#HOST = overo
+HOST = beth
+TARGET_DIR = ~
+
+SRC_FMS=fms
+
+
+ARCH=stm32
+ARCHI=stm32
+BOARD_CFG=\"boards/lisa_0.99.h\"
+FLASH_MODE = JTAG
+
+ap.CFLAGS += -DMODEM_BAUD=B57600
+
+include $(PAPARAZZI_SRC)/conf/autopilot/booz2_common.makefile
+include $(CFG_BOOZ)/booz2_autopilot.makefile
+
+include $(CFG_BOOZ)/subsystems/booz2_radio_control_spektrum.makefile
+include $(CFG_BOOZ)/subsystems/booz2_actuators_asctec_v2.makefile
+include $(CFG_BOOZ)/subsystems/booz2_imu_b2v1_1.makefile
+#include $(CFG_BOOZ)/subsystems/booz2_gps.makefile
+include $(CFG_BOOZ)/subsystems/booz2_ahrs_cmpl.makefile
+
+
+include $(PAPARAZZI_SRC)/conf/autopilot/lisa_test_progs.makefile
+
+#
+#
+#
+
+include $(PAPARAZZI_SRC)/conf/autopilot/lisa_passthrough.makefile
+
+ </makefile>
+
+</airframe>
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [paparazzi-commits] [4911],
antoine drouin <=