|
From: | Eduardo lavratti |
Subject: | Re: [Paparazzi-devel] Issue using I2C on LPC |
Date: | Thu, 19 Jul 2012 13:34:04 +0000 |
Hello Christoph, i am using hmc5843 on my two twog board´s without problem.
i am using last 3.9 pull. Date: Thu, 19 Jul 2012 08:31:21 +0200 From: address@hidden To: address@hidden Subject: Re: [Paparazzi-devel] Issue using I2C on LPC Dear List, its me again. Now I have the ESCs working but the HMC doesn't anymore. It seems somehow to be a software-problem, because it also doesn't work, when using a TWOG. As before by just defining I2C0 as HMC port in the makefile of the IMU, the LPC starts and the HMC connected to I2C0 works. Just defining I2C1 for the HMC results in a not starting LPC. By adding imu_CFLAGS += -DI2C1_VIC_SLOT=12 to the Makefile, the LPC starts, but the Mag doesn't work. What am I doing wrong? Thanks for your help Christoph 2012/7/18 Christoph Niemann <address@hidden> Hi Sergej! _______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel |
[Prev in Thread] | Current Thread | [Next in Thread] |