Re: [Protux-devel] protux hangs during soundcard detection.

[Remon Sijrier]

Hi Reinhard,

I have the same problem, and I think it's due the soundcard used by another 
app. like artsd.

If such a program runs on your computer, shut it down, or wait until it frees 
your soundcard, then protux will continue start.

Cheers,

Remon

On Sunday 21 September 2003 21:17, booker wrote:
> Hi,
>
> it seems that some of the latest changes had some effect on the soundcard
> detection process, because from now on I can't start protux no longer, it
> hangs here:
>
> address@hidden protux]$ p4
> ENTERING Main.cc::main
> Loading required GL library /usr/X11R6/lib/libGL.so.1.2
>    ENTERING MustuxApplication (CONSTRUCTOR)
>    LEAVING MustuxApplication (CONSTRUCTOR)
>    ENTERING Protux (CONSTRUCTOR)
>       ENTERING GlobalProperties.cc::init
>          [ Added property SLICE_WIDTH_FACTOR = 1  ]
>          [ Added property JMB_CLEAR_TIME = 2000  ]
>          [ Added property JMB_HOLD_SENSITIVENESS_FACTOR = 10  ]
>          [ Added property JMB_DOUBLE_PRESS_INTERVAL = 200  ]
>          [ Added property DEFAULT_NUM_TRACKS = 6  ]
>          [ Added property HZOOM_LEVEL = 18  ]
>          [ Added property DEFAULT_SAMPLE_RATE = 44100  ]
>          [ Added property DEFAULT_BIT_DEPTH = 16  ]
>          [ Added property AUDIO_MAPPER_FPS = 20  ]
>          [ Added property USE_PLUGHW = NO  ]
>          [ Added property USE_EXTERNAL_OGG_DECODER = 1  ]
>          [ Added property USE_EXTERNAL_OGG_ENCODER = 1  ]
>          [ Added property MP3_DECODE_COMMAND = mpg123 -w %of %if  ]
>          [ Added property OGG_DECODE_COMMAND = ogg123 -d wav -f %of %if  ]
>          [ Added property OGG_ENCODE_COMMAND = oggenc -b 320 -o %of %if  ]
>       LEAVING GlobalProperties.cc::init
>       ENTERING MustuxAudioDeviceMapper.cc::init
>          [ Found ALSA supported Card : EMU10K1 - Sound Blaster Live! ]
>          ENTERING Bus (CONSTRUCTOR)
>             [ PLABACK Bus 0 [ card 0 ] : "EMU10K1 - 1st OUT (plughw:0,3)"
> created ]
>          LEAVING Bus (CONSTRUCTOR)
>          ENTERING Bus (CONSTRUCTOR)
>             [ MustuxAudioDeviceMapper::CAPTURE Bus 0 [ card 0 ] : "EMU10K1
> - 1st IN (plughw:0,2)" created ]
>          LEAVING Bus (CONSTRUCTOR)
>          ENTERING Bus (CONSTRUCTOR)
>             [ MustuxAudioDeviceMapper::CAPTURE Bus 1 [ card 0 ] : "EMU10K1
> - 2nd IN (plughw:0,1)" created ]
>          LEAVING Bus (CONSTRUCTOR)
>          ENTERING Bus (CONSTRUCTOR)
>             [ PLABACK Bus 1 [ card 0 ] : "EMU10K1 - 2nd OUT (plughw:0,0)"
> created ]
>          LEAVING Bus (CONSTRUCTOR)
>          ENTERING Bus (CONSTRUCTOR)
>             [ MustuxAudioDeviceMapper::CAPTURE Bus 2 [ card 0 ] : "EMU10K1
> - 3rd IN (plughw:0,0)" created ]
>          LEAVING Bus (CONSTRUCTOR)
>
>          [ Probing CAPTURE Buses
> ------------------------------------------------ ]
>          ENTERING MustuxAudioBus.cc::probe_valid_modes
>             [ Probing valid modes for bus  0:0 ... ]
>             [   Trying 22050 Hz MONO 16 bits :             ENTERING
> MustuxAudioBus.cc::supports
>
>
>
> greetings
> Reinhard
>
>
> _______________________________________________
> Protux-devel mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/protux-devel