[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-arm] [PATCH v7 0/9] Add the ZynqMP PMU and IPI
From: |
Alistair Francis |
Subject: |
[Qemu-arm] [PATCH v7 0/9] Add the ZynqMP PMU and IPI |
Date: |
Mon, 22 Jan 2018 11:43:11 -0800 |
This series adds the ZynqMP Power Management Unit (PMU) machine with basic
functionality.
The machine only has the
- CPU
- Memory
- Interrupt controller
- IPI device
connected, but that is enough to run some of the ROM and firmware
code on the machine
The series also adds the IPI device and connects it to the ZynqMP ARM
side and the ZynqMP PMU. These IPI devices don't connect between the ARM
and MicroBlaze instances though.
V7:
- Fix Phipippe's comments
V6:
- Pass initrd instead of kernel to microblaze_load_kernel()
V5:
- Fix clang makecheck error
- Rebase on master
V4:
- Rename the ZCU102 machine to just ZynqMP
- Rename the PMC SoC to "xlnx,zynqmp-pmu-soc"
- Move the IPI device to the machine instead of the SoC
V3:
- Add the interrupt controller
- Replace some of the error_fatals with errp
- Fix the PMU CPU name
Alistair Francis (9):
microblaze: boot.c: Don't try to find NULL file
xlnx-zynqmp-pmu: Initial commit of the ZynqMP PMU
xlnx-zynqmp-pmu: Add the CPU and memory
aarch64-softmmu.mak: Use an ARM specific config
xlnx-pmu-iomod-intc: Add the PMU Interrupt controller
xlnx-zynqmp-pmu: Connect the PMU interrupt controller
xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device
xlnx-zynqmp-pmu: Connect the IPI device to the PMU
xlnx-zynqmp: Connect the IPI device to the ZynqMP SoC
default-configs/aarch64-softmmu.mak | 1 +
default-configs/microblaze-softmmu.mak | 1 +
include/hw/arm/xlnx-zynqmp.h | 2 +
include/hw/intc/xlnx-pmu-iomod-intc.h | 58 ++++
include/hw/intc/xlnx-zynqmp-ipi.h | 57 ++++
hw/arm/xlnx-zynqmp.c | 14 +
hw/intc/xlnx-pmu-iomod-intc.c | 554 +++++++++++++++++++++++++++++++++
hw/intc/xlnx-zynqmp-ipi.c | 377 ++++++++++++++++++++++
hw/microblaze/boot.c | 2 +-
hw/microblaze/xlnx-zynqmp-pmu.c | 204 ++++++++++++
hw/arm/Makefile.objs | 2 +-
hw/display/Makefile.objs | 2 +-
hw/dma/Makefile.objs | 1 +
hw/intc/Makefile.objs | 2 +
hw/microblaze/Makefile.objs | 1 +
15 files changed, 1275 insertions(+), 3 deletions(-)
create mode 100644 include/hw/intc/xlnx-pmu-iomod-intc.h
create mode 100644 include/hw/intc/xlnx-zynqmp-ipi.h
create mode 100644 hw/intc/xlnx-pmu-iomod-intc.c
create mode 100644 hw/intc/xlnx-zynqmp-ipi.c
create mode 100644 hw/microblaze/xlnx-zynqmp-pmu.c
--
2.14.1
- [Qemu-arm] [PATCH v7 0/9] Add the ZynqMP PMU and IPI,
Alistair Francis <=
- [Qemu-arm] [PATCH v7 1/9] microblaze: boot.c: Don't try to find NULL file, Alistair Francis, 2018/01/22
- [Qemu-arm] [PATCH v7 2/9] xlnx-zynqmp-pmu: Initial commit of the ZynqMP PMU, Alistair Francis, 2018/01/22
- [Qemu-arm] [PATCH v7 3/9] xlnx-zynqmp-pmu: Add the CPU and memory, Alistair Francis, 2018/01/22
- [Qemu-arm] [PATCH v7 4/9] aarch64-softmmu.mak: Use an ARM specific config, Alistair Francis, 2018/01/22
- [Qemu-arm] [PATCH v7 5/9] xlnx-pmu-iomod-intc: Add the PMU Interrupt controller, Alistair Francis, 2018/01/22
- [Qemu-arm] [PATCH v7 6/9] xlnx-zynqmp-pmu: Connect the PMU interrupt controller, Alistair Francis, 2018/01/22
- [Qemu-arm] [PATCH v7 7/9] xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device, Alistair Francis, 2018/01/22
- [Qemu-arm] [PATCH v7 8/9] xlnx-zynqmp-pmu: Connect the IPI device to the PMU, Alistair Francis, 2018/01/22
- [Qemu-arm] [PATCH v7 9/9] xlnx-zynqmp: Connect the IPI device to the ZynqMP SoC, Alistair Francis, 2018/01/22