[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-arm] [PATCH v2 19/21] aspeed: Add support for the swift-bmc board
From: |
Cédric Le Goater |
Subject: |
[Qemu-arm] [PATCH v2 19/21] aspeed: Add support for the swift-bmc board |
Date: |
Tue, 18 Jun 2019 18:53:09 +0200 |
From: Adriana Kobylak <address@hidden>
The Swift board is an OpenPOWER system hosting POWER processors.
Add support for their BMC including the I2C devices as found on HW.
Signed-off-by: Adriana Kobylak <address@hidden>
Reviewed-by: Cédric Le Goater <address@hidden>
---
hw/arm/aspeed.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index e404f8b244a9..51d6b5dd9627 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -73,6 +73,17 @@ struct AspeedBoardState {
SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
+/* Swift hardware value: 0xF11AD206 */
+#define SWIFT_BMC_HW_STRAP1 ( \
+ AST2500_HW_STRAP1_DEFAULTS | \
+ SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
+ SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
+ SCU_AST2500_HW_STRAP_UART_DEBUG | \
+ SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
+ SCU_H_PLL_BYPASS_EN | \
+ SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
+ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
+
/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
@@ -294,6 +305,35 @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338",
0x32);
}
+static void swift_bmc_i2c_init(AspeedBoardState *bmc)
+{
+ AspeedSoCState *soc = &bmc->soc;
+
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552",
0x60);
+
+ /* The swift board expects a TMP275 but a TMP105 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
+ /* The swift board expects a pca9551 but a pca9552 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552",
0x60);
+
+ /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible
*/
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552",
0x60);
+
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
+ /* The swift board expects a pca9539 but a pca9552 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552",
0x74);
+
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423",
0x4c);
+ /* The swift board expects a pca9539 but a pca9552 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
+ 0x74);
+
+ /* The swift board expects a TMP275 but a TMP105 is compatible */
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105",
0x48);
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105",
0x4a);
+}
+
static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
@@ -384,6 +424,16 @@ static const AspeedBoardConfig aspeed_boards[] = {
.num_cs = 2,
.i2c_init = romulus_bmc_i2c_init,
.ram = 512 * MiB,
+ }, {
+ .name = MACHINE_TYPE_NAME("swift-bmc"),
+ .desc = "OpenPOWER Swift BMC (ARM1176)",
+ .soc_name = "ast2500-a1",
+ .hw_strap1 = SWIFT_BMC_HW_STRAP1,
+ .fmc_model = "mx66l1g45g",
+ .spi_model = "mx66l1g45g",
+ .num_cs = 2,
+ .i2c_init = swift_bmc_i2c_init,
+ .ram = 512 * MiB,
}, {
.name = MACHINE_TYPE_NAME("witherspoon-bmc"),
.desc = "OpenPOWER Witherspoon BMC (ARM1176)",
--
2.21.0
- [Qemu-arm] [PATCH v2 11/21] aspeed/timer: Ensure positive muldiv delta, (continued)
- [Qemu-arm] [PATCH v2 11/21] aspeed/timer: Ensure positive muldiv delta, Cédric Le Goater, 2019/06/18
- [Qemu-arm] [PATCH v2 12/21] aspeed: remove the "ram" link, Cédric Le Goater, 2019/06/18
- [Qemu-arm] [PATCH v2 13/21] aspeed: add a RAM memory region container, Cédric Le Goater, 2019/06/18
- [Qemu-arm] [PATCH v2 14/21] aspeed/smc: add a 'sdram_base' property, Cédric Le Goater, 2019/06/18
- [Qemu-arm] [PATCH v2 15/21] aspeed/smc: add support for DMAs, Cédric Le Goater, 2019/06/18
- [Qemu-arm] [PATCH v2 18/21] aspeed/smc: Calculate checksum on normal DMA, Cédric Le Goater, 2019/06/18
- [Qemu-arm] [PATCH v2 16/21] aspeed/smc: add DMA calibration settings, Cédric Le Goater, 2019/06/18
- [Qemu-arm] [PATCH v2 17/21] aspeed/smc: inject errors in DMA checksum, Cédric Le Goater, 2019/06/18
- [Qemu-arm] [PATCH v2 19/21] aspeed: Add support for the swift-bmc board,
Cédric Le Goater <=
- [Qemu-arm] [PATCH v2 20/21] hw/misc/aspeed_xdma: New device, Cédric Le Goater, 2019/06/18
- [Qemu-arm] [PATCH v2 21/21] aspeed: vic: Add support for legacy register interface, Cédric Le Goater, 2019/06/18