[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH-for-4.2 v11 03/11] hw/acpi: Add ACPI Generic Eve
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-devel] [PATCH-for-4.2 v11 03/11] hw/acpi: Add ACPI Generic Event Device Support |
Date: |
Wed, 25 Sep 2019 17:03:01 +0200 |
On Wed, 18 Sep 2019 14:06:25 +0100
Shameer Kolothum <address@hidden> wrote:
> From: Samuel Ortiz <address@hidden>
>
> The ACPI Generic Event Device (GED) is a hardware-reduced specific
> device[ACPI v6.1 Section 5.6.9] that handles all platform events,
> including the hotplug ones. This patch generates the AML code that
> defines GEDs.
>
> Platforms need to specify their own GED Event bitmap to describe
> what kind of events they want to support through GED. Also this
> uses a a single interrupt for the GED device, relying on IO
> memory region to communicate the type of device affected by the
> interrupt. This way, we can support up to 32 events with a unique
> interrupt.
>
> This supports only memory hotplug for now.
>
> Signed-off-by: Samuel Ortiz <address@hidden>
> Signed-off-by: Sebastien Boeuf <address@hidden>
> Signed-off-by: Shameer Kolothum <address@hidden>
> Reviewed-by: Eric Auger <address@hidden>
Reviewed-by: Igor Mammedov <address@hidden>
> ---
> Addressed comments from Igor.
> - Removed memhp_state.is_enabled condition check and property.
> - Used instance_init() instead of realize()
> ---
> hw/acpi/Kconfig | 4 +
> hw/acpi/Makefile.objs | 1 +
> hw/acpi/generic_event_device.c | 303 +++++++++++++++++++++++++
> include/hw/acpi/generic_event_device.h | 100 ++++++++
> 4 files changed, 408 insertions(+)
> create mode 100644 hw/acpi/generic_event_device.c
> create mode 100644 include/hw/acpi/generic_event_device.h
>
> diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
> index 7c59cf900b..12e3f1e86e 100644
> --- a/hw/acpi/Kconfig
> +++ b/hw/acpi/Kconfig
> @@ -31,3 +31,7 @@ config ACPI_VMGENID
> bool
> default y
> depends on PC
> +
> +config ACPI_HW_REDUCED
> + bool
> + depends on ACPI
> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
> index 9bb2101e3b..655a9c1973 100644
> --- a/hw/acpi/Makefile.objs
> +++ b/hw/acpi/Makefile.objs
> @@ -6,6 +6,7 @@ common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
> common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
> common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
> common-obj-$(CONFIG_ACPI_VMGENID) += vmgenid.o
> +common-obj-$(CONFIG_ACPI_HW_REDUCED) += generic_event_device.o
> common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
>
> common-obj-y += acpi_interface.o
> diff --git a/hw/acpi/generic_event_device.c b/hw/acpi/generic_event_device.c
> new file mode 100644
> index 0000000000..b94500b08d
> --- /dev/null
> +++ b/hw/acpi/generic_event_device.c
> @@ -0,0 +1,303 @@
> +/*
> + *
> + * Copyright (c) 2018 Intel Corporation
> + * Copyright (c) 2019 Huawei Technologies R & D (UK) Ltd
> + * Written by Samuel Ortiz, Shameer Kolothum
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2 or later, as published by the Free Software Foundation.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "exec/address-spaces.h"
> +#include "hw/acpi/acpi.h"
> +#include "hw/acpi/generic_event_device.h"
> +#include "hw/irq.h"
> +#include "hw/mem/pc-dimm.h"
> +#include "hw/qdev-properties.h"
> +#include "migration/vmstate.h"
> +#include "qemu/error-report.h"
> +
> +static const uint32_t ged_supported_events[] = {
> + ACPI_GED_MEM_HOTPLUG_EVT,
> +};
> +
> +/*
> + * The ACPI Generic Event Device (GED) is a hardware-reduced specific
> + * device[ACPI v6.1 Section 5.6.9] that handles all platform events,
> + * including the hotplug ones. Platforms need to specify their own
> + * GED Event bitmap to describe what kind of events they want to support
> + * through GED. This routine uses a single interrupt for the GED device,
> + * relying on IO memory region to communicate the type of device
> + * affected by the interrupt. This way, we can support up to 32 events
> + * with a unique interrupt.
> + */
> +void build_ged_aml(Aml *table, const char *name, HotplugHandler *hotplug_dev,
> + uint32_t ged_irq, AmlRegionSpace rs, hwaddr ged_base)
> +{
> + AcpiGedState *s = ACPI_GED(hotplug_dev);
> + Aml *crs = aml_resource_template();
> + Aml *evt, *field;
> + Aml *dev = aml_device("%s", name);
> + Aml *evt_sel = aml_local(0);
> + Aml *esel = aml_name(AML_GED_EVT_SEL);
> +
> + /* _CRS interrupt */
> + aml_append(crs, aml_interrupt(AML_CONSUMER, AML_EDGE, AML_ACTIVE_HIGH,
> + AML_EXCLUSIVE, &ged_irq, 1));
> +
> + aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0013")));
> + aml_append(dev, aml_name_decl("_UID", aml_string(GED_DEVICE)));
> + aml_append(dev, aml_name_decl("_CRS", crs));
> +
> + /* Append IO region */
> + aml_append(dev, aml_operation_region(AML_GED_EVT_REG, rs,
> + aml_int(ged_base + ACPI_GED_EVT_SEL_OFFSET),
> + ACPI_GED_EVT_SEL_LEN));
> + field = aml_field(AML_GED_EVT_REG, AML_DWORD_ACC, AML_NOLOCK,
> + AML_WRITE_AS_ZEROS);
> + aml_append(field, aml_named_field(AML_GED_EVT_SEL,
> + ACPI_GED_EVT_SEL_LEN * BITS_PER_BYTE));
> + aml_append(dev, field);
> +
> + /*
> + * For each GED event we:
> + * - Add a conditional block for each event, inside a loop.
> + * - Call a method for each supported GED event type.
> + *
> + * The resulting ASL code looks like:
> + *
> + * Local0 = ESEL
> + * If ((Local0 & One) == One)
> + * {
> + * MethodEvent0()
> + * }
> + *
> + * If ((Local0 & 0x2) == 0x2)
> + * {
> + * MethodEvent1()
> + * }
> + * ...
> + */
> + evt = aml_method("_EVT", 1, AML_SERIALIZED);
> + {
> + Aml *if_ctx;
> + uint32_t i;
> + uint32_t ged_events = ctpop32(s->ged_event_bitmap);
> +
> + /* Local0 = ESEL */
> + aml_append(evt, aml_store(esel, evt_sel));
> +
> + for (i = 0; i < ARRAY_SIZE(ged_supported_events) && ged_events; i++)
> {
> + uint32_t event = s->ged_event_bitmap & ged_supported_events[i];
> +
> + if (!event) {
> + continue;
> + }
> +
> + if_ctx = aml_if(aml_equal(aml_and(evt_sel, aml_int(event), NULL),
> + aml_int(event)));
> + switch (event) {
> + case ACPI_GED_MEM_HOTPLUG_EVT:
> + aml_append(if_ctx, aml_call0(MEMORY_DEVICES_CONTAINER "."
> + MEMORY_SLOT_SCAN_METHOD));
> + break;
> + default:
> + /*
> + * Please make sure all the events in ged_supported_events[]
> + * are handled above.
> + */
> + g_assert_not_reached();
> + }
> +
> + aml_append(evt, if_ctx);
> + ged_events--;
> + }
> +
> + if (ged_events) {
> + error_report("Unsupported events specified");
> + abort();
> + }
> + }
> +
> + /* Append _EVT method */
> + aml_append(dev, evt);
> +
> + aml_append(table, dev);
> +}
> +
> +/* Memory read by the GED _EVT AML dynamic method */
> +static uint64_t ged_read(void *opaque, hwaddr addr, unsigned size)
> +{
> + uint64_t val = 0;
> + GEDState *ged_st = opaque;
> +
> + switch (addr) {
> + case ACPI_GED_EVT_SEL_OFFSET:
> + /* Read the selector value and reset it */
> + val = ged_st->sel;
> + ged_st->sel = 0;
> + break;
> + default:
> + break;
> + }
> +
> + return val;
> +}
> +
> +/* Nothing is expected to be written to the GED memory region */
> +static void ged_write(void *opaque, hwaddr addr, uint64_t data,
> + unsigned int size)
> +{
> +}
> +
> +static const MemoryRegionOps ged_ops = {
> + .read = ged_read,
> + .write = ged_write,
> + .endianness = DEVICE_LITTLE_ENDIAN,
> + .valid = {
> + .min_access_size = 4,
> + .max_access_size = 4,
> + },
> +};
> +
> +static void acpi_ged_device_plug_cb(HotplugHandler *hotplug_dev,
> + DeviceState *dev, Error **errp)
> +{
> + AcpiGedState *s = ACPI_GED(hotplug_dev);
> +
> + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> + acpi_memory_plug_cb(hotplug_dev, &s->memhp_state, dev, errp);
> + } else {
> + error_setg(errp, "virt: device plug request for unsupported device"
> + " type: %s", object_get_typename(OBJECT(dev)));
> + }
> +}
> +
> +static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
> +{
> + AcpiGedState *s = ACPI_GED(adev);
> + GEDState *ged_st = &s->ged_state;
> + uint32_t sel;
> +
> + if (ev & ACPI_MEMORY_HOTPLUG_STATUS) {
> + sel = ACPI_GED_MEM_HOTPLUG_EVT;
> + } else {
> + /* Unknown event. Return without generating interrupt. */
> + warn_report("GED: Unsupported event %d. No irq injected", ev);
> + return;
> + }
> +
> + /*
> + * Set the GED selector field to communicate the event type.
> + * This will be read by GED aml code to select the appropriate
> + * event method.
> + */
> + ged_st->sel |= sel;
> +
> + /* Trigger the event by sending an interrupt to the guest. */
> + qemu_irq_pulse(s->irq);
> +}
> +
> +static Property acpi_ged_properties[] = {
> + DEFINE_PROP_UINT32("ged-event", AcpiGedState, ged_event_bitmap, 0),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static const VMStateDescription vmstate_memhp_state = {
> + .name = "acpi-ged/memhp",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_MEMORY_HOTPLUG(memhp_state, AcpiGedState),
> + VMSTATE_END_OF_LIST()
> + }
> +};
> +
> +static const VMStateDescription vmstate_ged_state = {
> + .name = "acpi-ged-state",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_UINT32(sel, GEDState),
> + VMSTATE_END_OF_LIST()
> + }
> +};
> +
> +static const VMStateDescription vmstate_acpi_ged = {
> + .name = "acpi-ged",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_STRUCT(ged_state, AcpiGedState, 1, vmstate_ged_state,
> GEDState),
> + VMSTATE_END_OF_LIST(),
> + },
> + .subsections = (const VMStateDescription * []) {
> + &vmstate_memhp_state,
> + NULL
> + }
> +};
> +
> +static void acpi_ged_initfn(Object *obj)
> +{
> + DeviceState *dev = DEVICE(obj);
> + AcpiGedState *s = ACPI_GED(dev);
> + SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
> + GEDState *ged_st = &s->ged_state;
> +
> + memory_region_init_io(&ged_st->io, obj, &ged_ops, ged_st,
> + TYPE_ACPI_GED, ACPI_GED_EVT_SEL_LEN);
> + sysbus_init_mmio(sbd, &ged_st->io);
> +
> + sysbus_init_irq(sbd, &s->irq);
> +
> + s->memhp_state.is_enabled = true;
> + /*
> + * GED handles memory hotplug event and acpi-mem-hotplug
> + * memory region gets initialized here. Create an exclusive
> + * container for memory hotplug IO and expose it as GED sysbus
> + * MMIO so that boards can map it separately.
> + */
> + memory_region_init(&s->container_memhp, OBJECT(dev), "memhp container",
> + MEMORY_HOTPLUG_IO_LEN);
> + sysbus_init_mmio(sbd, &s->container_memhp);
> + acpi_memory_hotplug_init(&s->container_memhp, OBJECT(dev),
> + &s->memhp_state, 0);
> +}
> +
> +static void acpi_ged_class_init(ObjectClass *class, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(class);
> + HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(class);
> + AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_CLASS(class);
> +
> + dc->desc = "ACPI Generic Event Device";
> + dc->props = acpi_ged_properties;
> + dc->vmsd = &vmstate_acpi_ged;
> +
> + hc->plug = acpi_ged_device_plug_cb;
> +
> + adevc->send_event = acpi_ged_send_event;
> +}
> +
> +static const TypeInfo acpi_ged_info = {
> + .name = TYPE_ACPI_GED,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(AcpiGedState),
> + .instance_init = acpi_ged_initfn,
> + .class_init = acpi_ged_class_init,
> + .interfaces = (InterfaceInfo[]) {
> + { TYPE_HOTPLUG_HANDLER },
> + { TYPE_ACPI_DEVICE_IF },
> + { }
> + }
> +};
> +
> +static void acpi_ged_register_types(void)
> +{
> + type_register_static(&acpi_ged_info);
> +}
> +
> +type_init(acpi_ged_register_types)
> diff --git a/include/hw/acpi/generic_event_device.h
> b/include/hw/acpi/generic_event_device.h
> new file mode 100644
> index 0000000000..2049e8d873
> --- /dev/null
> +++ b/include/hw/acpi/generic_event_device.h
> @@ -0,0 +1,100 @@
> +/*
> + *
> + * Copyright (c) 2018 Intel Corporation
> + * Copyright (c) 2019 Huawei Technologies R & D (UK) Ltd
> + * Written by Samuel Ortiz, Shameer Kolothum
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2 or later, as published by the Free Software Foundation.
> + *
> + * The ACPI Generic Event Device (GED) is a hardware-reduced specific
> + * device[ACPI v6.1 Section 5.6.9] that handles all platform events,
> + * including the hotplug ones. Generic Event Device allows platforms
> + * to handle interrupts in ACPI ASL statements. It follows a very
> + * similar approach like the _EVT method from GPIO events. All
> + * interrupts are listed in _CRS and the handler is written in _EVT
> + * method. Here, we use a single interrupt for the GED device, relying
> + * on IO memory region to communicate the type of device affected by
> + * the interrupt. This way, we can support up to 32 events with a
> + * unique interrupt.
> + *
> + * Here is an example.
> + *
> + * Device (\_SB.GED)
> + * {
> + * Name (_HID, "ACPI0013")
> + * Name (_UID, Zero)
> + * Name (_CRS, ResourceTemplate ()
> + * {
> + * Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, ,, )
> + * {
> + * 0x00000029,
> + * }
> + * })
> + * OperationRegion (EREG, SystemMemory, 0x09080000, 0x04)
> + * Field (EREG, DWordAcc, NoLock, WriteAsZeros)
> + * {
> + * ESEL, 32
> + * }
> + *
> + * Method (_EVT, 1, Serialized) // _EVT: Event
> + * {
> + * Local0 = ESEL // ESEL = IO memory region which specifies the
> + * // device type.
> + * If (((Local0 & One) == One))
> + * {
> + * MethodEvent1()
> + * }
> + * If ((Local0 & 0x2) == 0x2)
> + * {
> + * MethodEvent2()
> + * }
> + * ...
> + * }
> + * }
> + *
> + */
> +
> +#ifndef HW_ACPI_GED_H
> +#define HW_ACPI_GED_H
> +
> +#include "hw/sysbus.h"
> +#include "hw/acpi/memory_hotplug.h"
> +
> +#define TYPE_ACPI_GED "acpi-ged"
> +#define ACPI_GED(obj) \
> + OBJECT_CHECK(AcpiGedState, (obj), TYPE_ACPI_GED)
> +
> +#define ACPI_GED_EVT_SEL_OFFSET 0x0
> +#define ACPI_GED_EVT_SEL_LEN 0x4
> +
> +#define GED_DEVICE "GED"
> +#define AML_GED_EVT_REG "EREG"
> +#define AML_GED_EVT_SEL "ESEL"
> +
> +/*
> + * Platforms need to specify the GED event bitmap
> + * to describe what kind of events they want to support
> + * through GED.
> + */
> +#define ACPI_GED_MEM_HOTPLUG_EVT 0x1
> +
> +typedef struct GEDState {
> + MemoryRegion io;
> + uint32_t sel;
> +} GEDState;
> +
> +typedef struct AcpiGedState {
> + SysBusDevice parent_obj;
> + MemHotplugState memhp_state;
> + MemoryRegion container_memhp;
> + GEDState ged_state;
> + uint32_t ged_event_bitmap;
> + qemu_irq irq;
> +} AcpiGedState;
> +
> +void build_ged_aml(Aml *table, const char* name, HotplugHandler *hotplug_dev,
> + uint32_t ged_irq, AmlRegionSpace rs, hwaddr ged_base);
> +
> +#endif
- [Qemu-arm] [PATCH-for-4.2 v11 00/11] ARM virt: ACPI memory hotplug support, Shameer Kolothum, 2019/09/18
- [Qemu-arm] [PATCH-for-4.2 v11 02/11] hw/acpi: Do not create memory hotplug method when handler is not defined, Shameer Kolothum, 2019/09/18
- [Qemu-arm] [PATCH-for-4.2 v11 01/11] hw/acpi: Make ACPI IO address space configurable, Shameer Kolothum, 2019/09/18
- [Qemu-arm] [PATCH-for-4.2 v11 03/11] hw/acpi: Add ACPI Generic Event Device Support, Shameer Kolothum, 2019/09/18
- Re: [Qemu-devel] [PATCH-for-4.2 v11 03/11] hw/acpi: Add ACPI Generic Event Device Support,
Igor Mammedov <=
- [Qemu-arm] [PATCH-for-4.2 v11 04/11] hw/arm/virt: Add memory hotplug framework, Shameer Kolothum, 2019/09/18
- [Qemu-arm] [PATCH-for-4.2 v11 05/11] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot, Shameer Kolothum, 2019/09/18
- [Qemu-arm] [PATCH-for-4.2 v11 06/11] hw/arm/virt-acpi-build: Add PC-DIMM in SRAT, Shameer Kolothum, 2019/09/18
- [Qemu-arm] [PATCH-for-4.2 v11 07/11] hw/arm: Factor out powerdown notifier from GPIO, Shameer Kolothum, 2019/09/18
- [Qemu-arm] [PATCH-for-4.2 v11 08/11] hw/arm: Use GED for system_powerdown event, Shameer Kolothum, 2019/09/18
- [Qemu-arm] [PATCH-for-4.2 v11 09/11] docs/specs: Add ACPI GED documentation, Shameer Kolothum, 2019/09/18
- [Qemu-arm] [PATCH-for-4.2 v11 11/11] tests: Add bios tests to arm/virt, Shameer Kolothum, 2019/09/18