Re: [PATCH v2 00/21] aspeed: cleanups and some extensions

[Joel Stanley]

On Wed, 19 Aug 2020 at 10:10, Cédric Le Goater <clg@kaod.org> wrote:
>
> Hello,
>
> This series includes various fixes improving the support of Aspeed
> machines. Extra attention was given to the robustness of the ftgmac100
> model. A small kernel module tester was created for this purpose :
>
>    https://github.com/legoater/ftgmac100-test/

I gave this a test and it successfully broke the machine for me
without your fixes.

I tried to test this series but the new build system stopped me from
being able to complete a build. It failed with:

Found ninjatool-1.8 at qemu/upstream/build/ninjatool
./ninjatool -t ninja2make --omit clean dist uninstall < build.ninja >
Makefile.ninja
/bin/sh: build.ninja: No such file or directory

:(

>
> Changes in v2 :
>
>  - definitions for some new flash models in m25p80 by Igor
>  - All Joel's comments should have been addressed
>  - A better fix of the integer overflow in ftgmac100_do_tx suggested
>    by Peter.
>
>
> This needs a couple more reviewed-by before I can send a PR.

I have read through all the patches and I have no objections.

Cheers,

Joel

>
> Thanks,
>
> C.
>
> Cédric Le Goater (16):
>   m25p80: Return the JEDEC ID twice for mx25l25635e
>   m25p80: Add support for mx25l25635f
>   m25p80: Add support for n25q512ax3
>   aspeed/scu: Fix valid access size on AST2400
>   aspeed/smc: Fix MemoryRegionOps definition
>   aspeed/smc: Fix max_slaves of the legacy SMC device
>   aspeed/sdhci: Fix reset sequence
>   ftgmac100: Fix registers that can be read
>   ftgmac100: Fix interrupt status "Packet transmitted on ethernet"
>   ftgmac100: Fix interrupt status "Packet moved to RX FIFO"
>   ftgmac100: Change interrupt status when a DMA error occurs
>   ftgmac100: Check for invalid len and address before doing a DMA
>     transfer
>   ftgmac100: Fix integer overflow in ftgmac100_do_tx()
>   ftgmac100: Improve software reset
>   aspeed/sdmc: Simplify calculation of RAM bits
>   aspeed/smc: Open AHB window of the second chip of the AST2600 FMC
>     controller
>
> Igor Kononenko (2):
>   arm: aspeed: add strap define `25HZ` of AST2500
>   hw: add a number of SPI-flash's of m25p80 family
>
> Joel Stanley (2):
>   aspeed/sdmc: Perform memory training
>   aspeed/sdmc: Allow writes to unprotected registers
>
> erik-smit (1):
>   hw/arm/aspeed: Add board model for Supermicro X11 BMC
>
>  include/hw/misc/aspeed_scu.h  |   1 +
>  include/hw/misc/aspeed_sdmc.h |  13 +++-
>  hw/arm/aspeed.c               |  35 ++++++++++
>  hw/block/m25p80.c             |   6 +-
>  hw/misc/aspeed_scu.c          |   9 +--
>  hw/misc/aspeed_sdmc.c         | 125 +++++++++++++++++++---------------
>  hw/net/ftgmac100.c            |  95 ++++++++++++++++++--------
>  hw/sd/aspeed_sdhci.c          |  14 +++-
>  hw/ssi/aspeed_smc.c           |   6 +-
>  9 files changed, 209 insertions(+), 95 deletions(-)
>
> --
> 2.25.4
>