[PATCH v2 15/25] hw/arm/musca: Create and connect ARMSSE Clocks

[Peter Maydell]

Create and connect the two clocks needed by the ARMSSE.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-16-peter.maydell@linaro.org
---
 hw/arm/musca.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/hw/arm/musca.c b/hw/arm/musca.c
index d82bef11cf2..a9292482a06 100644
--- a/hw/arm/musca.c
+++ b/hw/arm/musca.c
@@ -33,6 +33,7 @@
 #include "hw/misc/tz-ppc.h"
 #include "hw/misc/unimp.h"
 #include "hw/rtc/pl031.h"
+#include "hw/qdev-clock.h"
 #include "qom/object.h"
 
 #define MUSCA_NUMIRQ_MAX 96
@@ -82,6 +83,8 @@ struct MuscaMachineState {
     UnimplementedDeviceState sdio;
     UnimplementedDeviceState gpio;
     UnimplementedDeviceState cryptoisland;
+    Clock *sysclk;
+    Clock *s32kclk;
 };
 
 #define TYPE_MUSCA_MACHINE "musca"
@@ -96,6 +99,8 @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, 
MUSCA_MACHINE)
  * don't model that in our SSE-200 model yet.
  */
 #define SYSCLK_FRQ 40000000
+/* Slow 32Khz S32KCLK frequency in Hz */
+#define S32KCLK_FRQ (32 * 1000)
 
 static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno)
 {
@@ -367,6 +372,11 @@ static void musca_init(MachineState *machine)
         exit(1);
     }
 
+    mms->sysclk = clock_new(OBJECT(machine), "SYSCLK");
+    clock_set_hz(mms->sysclk, SYSCLK_FRQ);
+    mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK");
+    clock_set_hz(mms->s32kclk, S32KCLK_FRQ);
+
     object_initialize_child(OBJECT(machine), "sse-200", &mms->sse,
                             TYPE_SSE200);
     ssedev = DEVICE(&mms->sse);
@@ -376,6 +386,8 @@ static void musca_init(MachineState *machine)
     qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor);
     qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width);
     qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ);
+    qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk);
+    qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk);
     /*
      * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for
      * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0.
-- 
2.20.1