[PATCH v2 0/6] hw/i2c: Add NPCM7XX SMBus Device

[Hao Wu]

This patch set implements the System manager bus (SMBus) module in NPCM7XX
SoC. Basically, it emulates the data transactions of the module, not the
SDA/SCL levels. We have also added a QTest which contains read and write
operations for both single-byte and FIFO mode, and added basic I2C devices
for npcm750-evb and quanta-gsj boards.

We also cleaned up the unimplemented GPIO devices in npcm7xx.c since they
are already implemented.

Changes since v1:
- Fix errors for i2c device addresses for temperature sensors in GSJ machine
- Use at24c device to emulate GSJ EEPROM. It supports more than 256 bytes.
- Fill in VMState in npcm7xx_smbus.c
- Change commit message in patch 3 and 4
- Fix order in npcm7xx.c IRQ list
- Add a few extra comments to make things clearer

Hao Wu (6):
  hw/arm: Remove GPIO from unimplemented NPCM7XX
  hw/i2c: Implement NPCM7XX SMBus Module Single Mode
  hw/arm: Add I2C sensors for NPCM750 eval board
  hw/arm: Add I2C sensors and EEPROM for GSJ machine
  hw/i2c: Add a QTest for NPCM7XX SMBus Device
  hw/i2c: Implement NPCM7XX SMBus Module FIFO Mode

 default-configs/devices/arm-softmmu.mak |    1 +
 docs/system/arm/nuvoton.rst             |    2 +-
 hw/arm/npcm7xx.c                        |   76 +-
 hw/arm/npcm7xx_boards.c                 |   46 +
 hw/i2c/meson.build                      |    1 +
 hw/i2c/npcm7xx_smbus.c                  | 1097 +++++++++++++++++++++++
 hw/i2c/trace-events                     |   12 +
 include/hw/arm/npcm7xx.h                |    2 +
 include/hw/i2c/npcm7xx_smbus.h          |  113 +++
 tests/qtest/meson.build                 |    1 +
 tests/qtest/npcm7xx_smbus-test.c        |  495 ++++++++++
 11 files changed, 1821 insertions(+), 25 deletions(-)
 create mode 100644 hw/i2c/npcm7xx_smbus.c
 create mode 100644 include/hw/i2c/npcm7xx_smbus.h
 create mode 100644 tests/qtest/npcm7xx_smbus-test.c

-- 
2.30.0.365.g02bc693789-goog