Re: [PATCH] docs/system: document an example booting the versatilepb machine

[Peter Maydell]

On Fri, 29 Jan 2021 at 18:13, Alex Bennée <alex.bennee@linaro.org> wrote:
>
> There is a bit more out there including Aurelien's excellent write up
> and older Debian images here:
>
>   https://www.aurel32.net/info/debian_arm_qemu.php
>   https://people.debian.org/~aurel32/qemu/armel/
>
> However the web is transitory and git is forever so lets add something
> to the fine manual.
>
> Cc: Anders Roxell <anders.roxell@linaro.org>
> Cc: Aurelien Jarno <aurelien@aurel32.net>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
>  docs/system/arm/versatile.rst | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
>
> diff --git a/docs/system/arm/versatile.rst b/docs/system/arm/versatile.rst
> index 51221c30a4..d16f20ccae 100644
> --- a/docs/system/arm/versatile.rst
> +++ b/docs/system/arm/versatile.rst
> @@ -27,3 +27,35 @@ The Arm Versatile baseboard is emulated with the following 
> devices:
>     devices.
>
>  -  PL181 MultiMedia Card Interface with SD card.
> +
> +Booting a Linux kernel
> +----------------------
> +
> +Building a current Linux kernel with ``versatile_defconfig`` should be
> +enough to get something running.
> +
> +.. code-block:: bash
> +
> +  $ export ARCH=arm
> +  $ export CROSS_COMPILE=arm-linux-gnueabihf-
> +  $ make versatile_defconfig
> +  $ make

same remarks as for other patch.

Does the 'make' make the right dtb automatically, by the way?
(I have some notes where I had to tell the kernel to build the
dtb explicitly, but maybe they are out of date.)

> +
> +You may want to enable some additional modules if you want to boot
> +something from the SCSI interface::
> +
> +  CONFIG_PCI=y
> +  CONFIG_PCI_VERSATILE=y

It's a bit daft that these aren't in the defconfig, but hey.

> +  CONFIG_SCSI=y
> +  CONFIG_SCSI_SYM53C8XX_2=y
> +
> +You can then boot with a command line like:
> +
> +.. code-block:: bash
> +
> +  $ qemu-system-arm -machine type=versatilepb \
> +      -serial mon:stdio \
> +      -drive if=scsi,driver=file,filename=debian-buster-armel-rootfs.ext4 \
> +      -kernel zImage \
> +      -dtb versatile-pb.dtb  \
> +      -append "console=ttyAMA0 ro root=/dev/sda"

thanks
-- PMM