[PATCH v2 09/24] hw/arm/mps2-tz: Make number of IRQs board-specific

[Peter Maydell]

The AN524 has more interrupt lines than the AN505 and AN521; make
numirq board-specific rather than a compile-time constant.

Since the difference is small (92 on the current boards and 95 on the
new one) we don't dynamically allocate the cpu_irq_splitter[] array
but leave it as a fixed length array whose size is the maximum needed
for any of the boards.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/arm/mps2-tz.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index 5561c30b126..6362652e617 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -65,7 +65,7 @@
 #include "hw/qdev-clock.h"
 #include "qom/object.h"
 
-#define MPS2TZ_NUMIRQ 92
+#define MPS2TZ_NUMIRQ_MAX 92
 
 typedef enum MPS2TZFPGAType {
     FPGA_AN505,
@@ -81,6 +81,7 @@ struct MPS2TZMachineClass {
     const uint32_t *oscclk;
     uint32_t fpgaio_num_leds; /* Number of LEDs in FPGAIO LED0 register */
     bool fpgaio_has_switches; /* Does FPGAIO have SWITCH register? */
+    int numirq; /* Number of external interrupts */
     const char *armsse_type;
 };
 
@@ -105,7 +106,7 @@ struct MPS2TZMachineState {
     SplitIRQ sec_resp_splitter;
     qemu_or_irq uart_irq_orgate;
     DeviceState *lan9118;
-    SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ];
+    SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ_MAX];
     Clock *sysclk;
     Clock *s32kclk;
 };
@@ -140,8 +141,9 @@ static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, int 
irqno)
 {
     /* Return a qemu_irq which will signal IRQ n to all CPUs in the SSE. */
     MachineClass *mc = MACHINE_GET_CLASS(mms);
+    MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms);
 
-    assert(irqno < MPS2TZ_NUMIRQ);
+    assert(irqno < mmc->numirq);
 
     if (mc->max_cpus > 1) {
         return qdev_get_gpio_in(DEVICE(&mms->cpu_irq_splitter[irqno]), 0);
@@ -428,7 +430,7 @@ static void mps2tz_common_init(MachineState *machine)
     iotkitdev = DEVICE(&mms->iotkit);
     object_property_set_link(OBJECT(&mms->iotkit), "memory",
                              OBJECT(system_memory), &error_abort);
-    qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ);
+    qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", mmc->numirq);
     qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk);
     qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk);
     sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal);
@@ -439,8 +441,9 @@ static void mps2tz_common_init(MachineState *machine)
      * board. If there is only one CPU, we can just wire the device IRQ
      * directly to the SSE's IRQ input.
      */
+    assert(mmc->numirq <= MPS2TZ_NUMIRQ_MAX);
     if (mc->max_cpus > 1) {
-        for (i = 0; i < MPS2TZ_NUMIRQ; i++) {
+        for (i = 0; i < mmc->numirq; i++) {
             char *name = g_strdup_printf("mps2-irq-splitter%d", i);
             SplitIRQ *splitter = &mms->cpu_irq_splitter[i];
 
@@ -693,6 +696,7 @@ static void mps2tz_an505_class_init(ObjectClass *oc, void 
*data)
     mmc->len_oscclk = ARRAY_SIZE(an505_oscclk);
     mmc->fpgaio_num_leds = 2;
     mmc->fpgaio_has_switches = false;
+    mmc->numirq = 92;
     mmc->armsse_type = TYPE_IOTKIT;
 }
 
@@ -713,6 +717,7 @@ static void mps2tz_an521_class_init(ObjectClass *oc, void 
*data)
     mmc->len_oscclk = ARRAY_SIZE(an505_oscclk);
     mmc->fpgaio_num_leds = 2;
     mmc->fpgaio_has_switches = false;
+    mmc->numirq = 92;
     mmc->armsse_type = TYPE_SSE200;
 }
 
-- 
2.20.1