Re: [RESEND PATCH v4 3/5] hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI

[Edgar E. Iglesias]

On Mon, Feb 22, 2021 at 09:15:00PM +0800, Bin Meng wrote:
> From: Xuzhou Cheng <xuzhou.cheng@windriver.com>
> 
> Add a Xilinx CSU DMA module to ZynqMP SoC, and connent the stream
> link of GQSPI to CSU DMA.
> 
> Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>



> 
> ---
> RESEND this patch to remove 2 blank lines that were accidently added
> 
> Changes in v4:
> - Rename "csu_dma" to "qspi_dma"
> 
> Changes in v3:
> - new patch: xlnx-zynqmp: Add XLNX CSU DMA module
> 
>  include/hw/arm/xlnx-zynqmp.h |  2 ++
>  hw/arm/xlnx-zynqmp.c         | 12 ++++++++++++
>  hw/arm/Kconfig               |  1 +
>  3 files changed, 15 insertions(+)
> 
> diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
> index be15cc8814..2edeed911c 100644
> --- a/include/hw/arm/xlnx-zynqmp.h
> +++ b/include/hw/arm/xlnx-zynqmp.h
> @@ -35,6 +35,7 @@
>  #include "target/arm/cpu.h"
>  #include "qom/object.h"
>  #include "net/can_emu.h"
> +#include "hw/dma/xlnx_csu_dma.h"
>  
>  #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp"
>  OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP)
> @@ -108,6 +109,7 @@ struct XlnxZynqMPState {
>      XlnxZynqMPRTC rtc;
>      XlnxZDMA gdma[XLNX_ZYNQMP_NUM_GDMA_CH];
>      XlnxZDMA adma[XLNX_ZYNQMP_NUM_ADMA_CH];
> +    XlnxCSUDMA qspi_dma;
>  
>      char *boot_cpu;
>      ARMCPU *boot_cpu_ptr;
> diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
> index 49465a2794..76cc3b5e78 100644
> --- a/hw/arm/xlnx-zynqmp.c
> +++ b/hw/arm/xlnx-zynqmp.c
> @@ -50,6 +50,7 @@
>  #define QSPI_ADDR           0xff0f0000
>  #define LQSPI_ADDR          0xc0000000
>  #define QSPI_IRQ            15
> +#define QSPI_DMA_ADDR       0xff0f0800
>  
>  #define DP_ADDR             0xfd4a0000
>  #define DP_IRQ              113
> @@ -284,6 +285,8 @@ static void xlnx_zynqmp_init(Object *obj)
>      for (i = 0; i < XLNX_ZYNQMP_NUM_ADMA_CH; i++) {
>          object_initialize_child(obj, "adma[*]", &s->adma[i], TYPE_XLNX_ZDMA);
>      }
> +
> +    object_initialize_child(obj, "qspi-dma", &s->qspi_dma, 
> TYPE_XLNX_CSU_DMA);
>  }
>  
>  static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
> @@ -643,6 +646,15 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error 
> **errp)
>          sysbus_connect_irq(SYS_BUS_DEVICE(&s->adma[i]), 0,
>                             gic_spi[adma_ch_intr[i]]);
>      }
> +
> +    if (!sysbus_realize(SYS_BUS_DEVICE(&s->qspi_dma), errp)) {
> +        return;
> +    }
> +
> +    sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi_dma), 0, QSPI_DMA_ADDR);
> +    sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi_dma), 0, gic_spi[QSPI_IRQ]);
> +    object_property_set_link(OBJECT(&s->qspi), "stream-connected-dma",
> +                             OBJECT(&s->qspi_dma), errp);
>  }
>  
>  static Property xlnx_zynqmp_props[] = {
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index 4e6f4ffe90..27ec10f89b 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -353,6 +353,7 @@ config XLNX_ZYNQMP_ARM
>      select SSI_M25P80
>      select XILINX_AXI
>      select XILINX_SPIPS
> +    select XLNX_CSU_DMA
>      select XLNX_ZYNQMP
>      select XLNX_ZDMA
>  
> -- 
> 2.25.1
>