[PATCH] hw/arm/aspeed: Add i2c devices for AST2600 EVB

[Howard Chiu]

Add EEPROM and LM75 temperature sensor according to hardware schematic

Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com>
---
 hw/arm/aspeed.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index a74c13ab0f..df74d3e955 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -526,8 +526,15 @@ static void ast2500_evb_i2c_init(AspeedMachineState *bmc)
 
 static void ast2600_evb_i2c_init(AspeedMachineState *bmc)
 {
-    /* Start with some devices on our I2C busses */
-    ast2500_evb_i2c_init(bmc);
+    AspeedSoCState *soc = &bmc->soc;
+    uint8_t *eeprom_buf = g_malloc0(8 * 1024);
+
+    smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 7), 0x50,
+                          eeprom_buf);
+
+    /* LM75 is compatible with TMP105 driver */
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8),
+                     TYPE_TMP105, 0x4d);
 }
 
 static void romulus_bmc_i2c_init(AspeedMachineState *bmc)
-- 
2.25.1