[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH V4 2/3] hw/riscv: virt: Move create_fw_cfg() prior to loading
From: |
Alistair Francis |
Subject: |
Re: [PATCH V4 2/3] hw/riscv: virt: Move create_fw_cfg() prior to loading kernel |
Date: |
Thu, 8 Sep 2022 11:20:23 +0200 |
On Tue, Sep 6, 2022 at 11:44 AM Sunil V L <sunilvl@ventanamicro.com> wrote:
>
> To enable both -kernel and -pflash options, the fw_cfg needs to be
> created prior to loading the kernel.
>
> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Alistair
> ---
> hw/riscv/virt.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
> index ff8c0df5cd..b6bbf03f61 100644
> --- a/hw/riscv/virt.c
> +++ b/hw/riscv/virt.c
> @@ -1251,6 +1251,13 @@ static void virt_machine_done(Notifier *notifier, void
> *data)
> RISCV64_BIOS_BIN, start_addr, NULL);
> }
>
> + /*
> + * Init fw_cfg. Must be done before riscv_load_fdt, otherwise the device
> + * tree cannot be altered and we get FDT_ERR_NOSPACE.
> + */
> + s->fw_cfg = create_fw_cfg(machine);
> + rom_set_fw(s->fw_cfg);
> +
> if (machine->kernel_filename) {
> kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0],
> firmware_end_addr);
> @@ -1284,13 +1291,6 @@ static void virt_machine_done(Notifier *notifier, void
> *data)
> start_addr = virt_memmap[VIRT_FLASH].base;
> }
>
> - /*
> - * Init fw_cfg. Must be done before riscv_load_fdt, otherwise the device
> - * tree cannot be altered and we get FDT_ERR_NOSPACE.
> - */
> - s->fw_cfg = create_fw_cfg(machine);
> - rom_set_fw(s->fw_cfg);
> -
> /* Compute the fdt load address in dram */
> fdt_load_addr = riscv_load_fdt(memmap[VIRT_DRAM].base,
> machine->ram_size, machine->fdt);
> --
> 2.25.1
>
>
[PATCH V4 2/3] hw/riscv: virt: Move create_fw_cfg() prior to loading kernel, Sunil V L, 2022/09/06
- Re: [PATCH V4 2/3] hw/riscv: virt: Move create_fw_cfg() prior to loading kernel,
Alistair Francis <=
[PATCH V4 3/3] hw/riscv: virt: Enable booting S-mode firmware from pflash, Sunil V L, 2022/09/06
Re: [PATCH V4 0/3] hw/riscv: virt: Enable booting S-mode firmware from pflash, Gerd Hoffmann, 2022/09/06