[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH qemu v2 1/1] Implement STM32L4x5 EXTI
|
From: |
~aminier |
|
Subject: |
[PATCH qemu v2 1/1] Implement STM32L4x5 EXTI |
|
Date: |
Sat, 11 Nov 2023 15:33:33 +0100 |
From: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
---
hw/arm/Kconfig | 1 +
hw/arm/stm32l4x5_soc.c | 65 ++++++-
hw/misc/Kconfig | 3 +
hw/misc/meson.build | 1 +
hw/misc/stm32l4x5_exti.c | 303 ++++++++++++++++++++++++++++++
hw/misc/trace-events | 5 +
include/hw/arm/stm32l4x5_soc.h | 3 +
include/hw/misc/stm32l4x5_exti.h | 58 ++++++
tests/qtest/meson.build | 5 +
tests/qtest/stm32l4x5_exti-test.c | 104 ++++++++++
10 files changed, 546 insertions(+), 2 deletions(-)
create mode 100644 hw/misc/stm32l4x5_exti.c
create mode 100644 include/hw/misc/stm32l4x5_exti.h
create mode 100644 tests/qtest/stm32l4x5_exti-test.c
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index b95576fb0c..28d378ed83 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -458,6 +458,7 @@ config STM32L4X5_SOC
bool
select ARM_V7M
select OR_IRQ
+ select STM32L4X5_EXTI
config XLNX_ZYNQMP_ARM
bool
diff --git a/hw/arm/stm32l4x5_soc.c b/hw/arm/stm32l4x5_soc.c
index 198d3f6d3e..8065050907 100644
--- a/hw/arm/stm32l4x5_soc.c
+++ b/hw/arm/stm32l4x5_soc.c
@@ -43,10 +43,51 @@
#define SRAM2_BASE_ADDRESS 0x10000000
#define SRAM2_SIZE (32 * KiB)
+#define EXTI_ADDR 0x40010400
+
+#define NUM_EXTI_IRQ 40
+/* Match exti line connections with their CPU IRQ number */
+/* See Vector Table (Reference Manual p.396) */
+static const int exti_irq[NUM_EXTI_IRQ] = {
+ 6, /* GPIO[0] */
+ 7, /* GPIO[1] */
+ 8, /* GPIO[2] */
+ 9, /* GPIO[3] */
+ 10, /* GPIO[4] */
+ 23, 23, 23, 23, 23, /* GPIO[5..9] */
+ 40, 40, 40, 40, 40, 40, /* GPIO[10..15] */
+ 1, /* PVD */
+ 67, /* OTG_FS_WKUP, Direct */
+ 41, /* RTC_ALARM */
+ 2, /* RTC_TAMP_STAMP2/CSS_LSE */
+ 3, /* RTC wakeup timer */
+ 63, /* COMP1 */
+ 63, /* COMP2 */
+ 31, /* I2C1 wakeup, Direct */
+ 33, /* I2C2 wakeup, Direct */
+ 72, /* I2C3 wakeup, Direct */
+ 37, /* USART1 wakeup, Direct */
+ 38, /* USART2 wakeup, Direct */
+ 39, /* USART3 wakeup, Direct */
+ 52, /* UART4 wakeup, Direct */
+ 53, /* UART4 wakeup, Direct */
+ 70, /* LPUART1 wakeup, Direct */
+ 65, /* LPTIM1, Direct */
+ 66, /* LPTIM2, Direct */
+ 76, /* SWPMI1 wakeup, Direct */
+ 1, /* PVM1 wakeup */
+ 1, /* PVM2 wakeup */
+ 1, /* PVM3 wakeup */
+ 1, /* PVM4 wakeup */
+ 78 /* LCD wakeup, Direct */
+};
+
static void stm32l4x5_soc_initfn(Object *obj)
{
Stm32l4x5SocState *s = STM32L4X5_SOC(obj);
+ object_initialize_child(obj, "exti", &s->exti, TYPE_STM32L4X5_EXTI);
+
s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0);
s->refclk = qdev_init_clock_in(DEVICE(s), "refclk", NULL, NULL, 0);
}
@@ -57,7 +98,9 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error
**errp)
Stm32l4x5SocState *s = STM32L4X5_SOC(dev_soc);
const Stm32l4x5SocClass *sc = STM32L4X5_SOC_GET_CLASS(dev_soc);
MemoryRegion *system_memory = get_system_memory();
- DeviceState *armv7m;
+ DeviceState *dev, *armv7m;
+ SysBusDevice *busdev;
+ int i;
/*
* We use s->refclk internally and only define it with qdev_init_clock_in()
@@ -122,6 +165,25 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc,
Error **errp)
return;
}
+ dev = DEVICE(&s->exti);
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->exti), errp)) {
+ return;
+ }
+ busdev = SYS_BUS_DEVICE(dev);
+ sysbus_mmio_map(busdev, 0, EXTI_ADDR);
+ for (i = 0; i < NUM_EXTI_IRQ; i++) {
+ /* IRQ seems not to be connected ? */
+ sysbus_connect_irq(busdev, i, qdev_get_gpio_in(armv7m, exti_irq[i]));
+ }
+
+ /*
+ * Uncomment when Syscfg is implemented
+ * for (i = 0; i < 16; i++) {
+ * qdev_connect_gpio_out(DEVICE(&s->syscfg), i,
+ * qdev_get_gpio_in(dev, i));
+ * }
+ */
+
/* APB1 BUS */
create_unimplemented_device("TIM2", 0x40000000, 0x400);
create_unimplemented_device("TIM3", 0x40000400, 0x400);
@@ -162,7 +224,6 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc,
Error **errp)
create_unimplemented_device("SYSCFG", 0x40010000, 0x30);
create_unimplemented_device("VREFBUF", 0x40010030, 0x1D0);
create_unimplemented_device("COMP", 0x40010200, 0x200);
- create_unimplemented_device("EXTI", 0x40010400, 0x400);
/* RESERVED: 0x40010800, 0x1400 */
create_unimplemented_device("FIREWALL", 0x40011C00, 0x400);
/* RESERVED: 0x40012000, 0x800 */
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index cc8a8c1418..3efe3dc2cc 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -87,6 +87,9 @@ config STM32F4XX_SYSCFG
config STM32F4XX_EXTI
bool
+config STM32L4X5_EXTI
+ bool
+
config MIPS_ITU
bool
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index 36c20d5637..16db6e228d 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -110,6 +110,7 @@ system_ss.add(when: 'CONFIG_XLNX_VERSAL_TRNG', if_true:
files(
system_ss.add(when: 'CONFIG_STM32F2XX_SYSCFG', if_true:
files('stm32f2xx_syscfg.c'))
system_ss.add(when: 'CONFIG_STM32F4XX_SYSCFG', if_true:
files('stm32f4xx_syscfg.c'))
system_ss.add(when: 'CONFIG_STM32F4XX_EXTI', if_true:
files('stm32f4xx_exti.c'))
+system_ss.add(when: 'CONFIG_STM32L4X5_EXTI', if_true:
files('stm32l4x5_exti.c'))
system_ss.add(when: 'CONFIG_MPS2_FPGAIO', if_true: files('mps2-fpgaio.c'))
system_ss.add(when: 'CONFIG_MPS2_SCC', if_true: files('mps2-scc.c'))
diff --git a/hw/misc/stm32l4x5_exti.c b/hw/misc/stm32l4x5_exti.c
new file mode 100644
index 0000000000..117a1a31b4
--- /dev/null
+++ b/hw/misc/stm32l4x5_exti.c
@@ -0,0 +1,303 @@
+/*
+ * STM32L4x5 EXTI (Extended interrupts and events controller)
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * SPDX-License-Identifier: MIT
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* stm32l4x5_exti implementation is derived from stm32f4xx_exti */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "trace.h"
+#include "hw/irq.h"
+#include "migration/vmstate.h"
+#include "hw/misc/stm32l4x5_exti.h"
+
+#define EXTI_IMR1 0x00
+#define EXTI_EMR1 0x04
+#define EXTI_RTSR1 0x08
+#define EXTI_FTSR1 0x0C
+#define EXTI_SWIER1 0x10
+#define EXTI_PR1 0x14
+#define EXTI_IMR2 0x20
+#define EXTI_EMR2 0x24
+#define EXTI_RTSR2 0x28
+#define EXTI_FTSR2 0x2C
+#define EXTI_SWIER2 0x30
+#define EXTI_PR2 0x34
+
+#define EXTI_NUM_GPIO_EVENT_IN_LINES 16
+
+/* 0b11111111_10000010_00000000_00000000 */
+#define DIRECT_LINE_MASK1 0xFF820000
+/* 0b00000000_00000000_00000000_10000111 */
+#define DIRECT_LINE_MASK2 0x00000087
+/* 0b11111111_11111111_11111111_00000000 */
+#define RESERVED_BITS_MASK_EXTI_xMR2 0xFFFFFF00
+
+/* 0b00000000_00000000_00000000_01111000 */
+#define ACTIVABLE_xR2 (~DIRECT_LINE_MASK2 & ~RESERVED_BITS_MASK_EXTI_xMR2)
+
+static void stm32l4x5_exti_reset_hold(Object *obj)
+{
+ Stm32l4x5ExtiState *s = STM32L4X5_EXTI(obj);
+
+ s->imr[0] = DIRECT_LINE_MASK1;
+ s->emr[0] = 0x00000000;
+ s->rtsr[0] = 0x00000000;
+ s->ftsr[0] = 0x00000000;
+ s->swier[0] = 0x00000000;
+ s->pr[0] = 0x00000000;
+
+ s->imr[1] = DIRECT_LINE_MASK2;
+ s->emr[1] = 0x00000000;
+ s->rtsr[1] = 0x00000000;
+ s->ftsr[1] = 0x00000000;
+ s->swier[1] = 0x00000000;
+ s->pr[1] = 0x00000000;
+}
+
+static void stm32l4x5_exti_set_irq(void *opaque, int irq, int level)
+{
+ Stm32l4x5ExtiState *s = opaque;
+ const unsigned n = irq >= 32;
+ const int oirq = irq;
+
+ trace_stm32l4x5_exti_set_irq(irq, level);
+
+ if (irq >= 32) {
+ /* Shift the value to enable access in x2 registers. */
+ irq -= 32;
+ }
+
+ if (((1 << irq) & s->rtsr[n]) && level) {
+ /* Rising Edge */
+ s->pr[n] |= 1 << irq;
+ }
+
+ if (((1 << irq) & s->ftsr[n]) && !level) {
+ /* Falling Edge */
+ s->pr[n] |= 1 << irq;
+ }
+
+ if (!((1 << irq) & s->imr[n])) {
+ /* Interrupt is masked */
+ return;
+ }
+
+ qemu_irq_pulse(s->irq[oirq]);
+}
+
+static uint64_t stm32l4x5_exti_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ Stm32l4x5ExtiState *s = opaque;
+ uint32_t r = 0;
+ const unsigned n = addr >= EXTI_IMR2;
+
+ switch (addr) {
+ case EXTI_IMR1:
+ case EXTI_IMR2:
+ r = s->imr[n];
+ break;
+ case EXTI_EMR1:
+ case EXTI_EMR2:
+ r = s->emr[n];
+ break;
+ case EXTI_RTSR1:
+ case EXTI_RTSR2:
+ r = s->rtsr[n];
+ break;
+ case EXTI_FTSR1:
+ case EXTI_FTSR2:
+ r = s->ftsr[n];
+ break;
+ case EXTI_SWIER1:
+ case EXTI_SWIER2:
+ r = s->swier[n];
+ break;
+ case EXTI_PR1:
+ case EXTI_PR2:
+ r = s->pr[n];
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "STM32L4X5_exti_read: Bad offset 0x%x\n", (int)addr);
+ break;
+ }
+
+ trace_stm32l4x5_exti_read(addr, r);
+
+ return r;
+}
+
+static void stm32l4x5_exti_write(void *opaque, hwaddr addr,
+ uint64_t val64, unsigned int size)
+{
+ Stm32l4x5ExtiState *s = opaque;
+ const uint32_t value = (uint32_t)val64;
+
+ trace_stm32l4x5_exti_write(addr, value);
+
+ switch (addr) {
+ case EXTI_IMR1:
+ s->imr[0] = value;
+ return;
+ case EXTI_EMR1:
+ s->emr[0] = value;
+ return;
+ case EXTI_RTSR1:
+ s->rtsr[0] = value & ~DIRECT_LINE_MASK1;
+ return;
+ case EXTI_FTSR1:
+ s->ftsr[0] = value & ~DIRECT_LINE_MASK1;
+ return;
+ case EXTI_SWIER1:
+ s->swier[0] = value & ~DIRECT_LINE_MASK1;
+ for (int i = 0; i < 32; i++) {
+ const uint32_t mask = 1 << i;
+ if (s->swier[0] & s->imr[0] & mask) {
+ s->pr[0] |= mask;
+ qemu_irq_pulse(s->irq[i]);
+ }
+ }
+ return;
+ case EXTI_PR1:
+ /* This bit is cleared by writing a 1 to it */
+ s->pr[0] &= ~(value & ~DIRECT_LINE_MASK1);
+ /* Don't forget to clean software interrupts */
+ s->swier[0] &= ~(value & ~DIRECT_LINE_MASK1);
+ for (int i = 0; i < 32; i++) {
+ const uint32_t mask = 1 << i;
+ if (!(s->pr[0] & mask)) {
+ qemu_irq_lower(s->irq[i]);
+ }
+ }
+ return;
+ case EXTI_IMR2:
+ s->imr[1] = value & ~RESERVED_BITS_MASK_EXTI_xMR2;
+ return;
+ case EXTI_EMR2:
+ s->emr[1] = value & ~RESERVED_BITS_MASK_EXTI_xMR2;
+ return;
+ case EXTI_RTSR2:
+ s->rtsr[1] = value & ACTIVABLE_xR2;
+ return;
+ case EXTI_FTSR2:
+ s->ftsr[1] = value & ACTIVABLE_xR2;
+ return;
+ case EXTI_SWIER2:
+ s->swier[1] = value & ACTIVABLE_xR2;
+ for (int i = 0; i < 8; i++) {
+ const uint32_t mask = 1 << i;
+ if (s->swier[1] & s->imr[1] & mask) {
+ s->pr[1] |= mask;
+ qemu_irq_raise(s->irq[32 + i]);
+ }
+ }
+ return;
+ case EXTI_PR2:
+ /* This bit is cleared by writing a 1 to it */
+ s->pr[1] &= ~value | ~ACTIVABLE_xR2;
+ /* Don't forget to clean software interrupts */
+ s->swier[1] &= ~value | ~ACTIVABLE_xR2;
+ for (int i = 0; i < 8; i++) {
+ const uint32_t mask = 1 << i;
+ if (!(s->pr[1] & mask)) {
+ qemu_irq_lower(s->irq[32 + i]);
+ }
+ }
+ return;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "STM32L4X5_exti_write: Bad offset 0x%x\n", (int)addr);
+ }
+}
+
+static const MemoryRegionOps stm32l4x5_exti_ops = {
+ .read = stm32l4x5_exti_read,
+ .write = stm32l4x5_exti_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl.min_access_size = 4,
+ .impl.max_access_size = 4,
+ .impl.unaligned = false,
+ .valid.min_access_size = 4,
+ .valid.max_access_size = 4,
+ .valid.unaligned = false,
+};
+
+static void stm32l4x5_exti_init(Object *obj)
+{
+ Stm32l4x5ExtiState *s = STM32L4X5_EXTI(obj);
+ int i;
+
+ for (i = 0; i < EXTI_NUM_INTERRUPT_OUT_LINES; i++) {
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq[i]);
+ }
+
+ memory_region_init_io(&s->mmio, obj, &stm32l4x5_exti_ops, s,
+ TYPE_STM32L4X5_EXTI, 0x400);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+
+ qdev_init_gpio_in(DEVICE(obj), stm32l4x5_exti_set_irq,
+ EXTI_NUM_GPIO_EVENT_IN_LINES);
+}
+
+static const VMStateDescription vmstate_stm32l4x5_exti = {
+ .name = TYPE_STM32L4X5_EXTI,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(imr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_UINT32_ARRAY(emr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_UINT32_ARRAY(rtsr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_UINT32_ARRAY(ftsr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_UINT32_ARRAY(swier, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_UINT32_ARRAY(pr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void stm32l4x5_exti_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+
+ dc->vmsd = &vmstate_stm32l4x5_exti;
+ rc->phases.hold = stm32l4x5_exti_reset_hold;
+}
+
+static const TypeInfo stm32l4x5_exti_types[] = {
+ {
+ .name = TYPE_STM32L4X5_EXTI,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(Stm32l4x5ExtiState),
+ .instance_init = stm32l4x5_exti_init,
+ .class_init = stm32l4x5_exti_class_init,
+ }
+};
+
+DEFINE_TYPES(stm32l4x5_exti_types)
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 05ff692441..2f01c62c0e 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -163,6 +163,11 @@ stm32f4xx_exti_set_irq(int irq, int level) "Set EXTI: %d
to %d"
stm32f4xx_exti_read(uint64_t addr) "reg read: addr: 0x%" PRIx64 " "
stm32f4xx_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%"
PRIx64 " val: 0x%" PRIx64 ""
+# stm32l4x5_exti.c
+stm32l4x5_exti_set_irq(int irq, int level) "Set EXTI: %d to %d"
+stm32l4x5_exti_read(uint64_t addr, uint64_t data) "reg read: addr: 0x%" PRIx64
" val: 0x%" PRIx64 ""
+stm32l4x5_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%"
PRIx64 " val: 0x%" PRIx64 ""
+
# tz-mpc.c
tz_mpc_reg_read(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs
read: offset 0x%x data 0x%" PRIx64 " size %u"
tz_mpc_reg_write(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs
write: offset 0x%x data 0x%" PRIx64 " size %u"
diff --git a/include/hw/arm/stm32l4x5_soc.h b/include/hw/arm/stm32l4x5_soc.h
index ab61c4b8a1..940941598e 100644
--- a/include/hw/arm/stm32l4x5_soc.h
+++ b/include/hw/arm/stm32l4x5_soc.h
@@ -32,6 +32,7 @@
#include "qemu/units.h"
#include "hw/qdev-core.h"
#include "hw/arm/armv7m.h"
+#include "hw/misc/stm32l4x5_exti.h"
#include "qom/object.h"
#define TYPE_STM32L4X5_SOC "stm32l4x5-soc"
@@ -45,6 +46,8 @@ struct Stm32l4x5SocState {
ARMv7MState armv7m;
+ Stm32l4x5ExtiState exti;
+
MemoryRegion sram1;
MemoryRegion sram2;
MemoryRegion flash;
diff --git a/include/hw/misc/stm32l4x5_exti.h b/include/hw/misc/stm32l4x5_exti.h
new file mode 100644
index 0000000000..89b3e33b6b
--- /dev/null
+++ b/include/hw/misc/stm32l4x5_exti.h
@@ -0,0 +1,58 @@
+/*
+ * STM32L4x5 EXTI (Extended interrupts and events controller)
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * SPDX-License-Identifier: MIT
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* stm32l4x5_exti implementation is derived from stm32f4xx_exti */
+
+#ifndef HW_STM32L4X5_EXTI_H
+#define HW_STM32L4X5_EXTI_H
+
+#include "hw/sysbus.h"
+#include "qom/object.h"
+
+#define TYPE_STM32L4X5_EXTI "stm32l4x5-exti"
+OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5ExtiState, STM32L4X5_EXTI)
+
+#define EXTI_NUM_INTERRUPT_OUT_LINES 40
+#define EXTI_NUM_REGISTER 2
+
+struct Stm32l4x5ExtiState {
+ SysBusDevice parent_obj;
+
+ MemoryRegion mmio;
+
+ uint32_t imr[EXTI_NUM_REGISTER];
+ uint32_t emr[EXTI_NUM_REGISTER];
+ uint32_t rtsr[EXTI_NUM_REGISTER];
+ uint32_t ftsr[EXTI_NUM_REGISTER];
+ uint32_t swier[EXTI_NUM_REGISTER];
+ uint32_t pr[EXTI_NUM_REGISTER];
+
+ qemu_irq irq[EXTI_NUM_INTERRUPT_OUT_LINES];
+};
+
+#endif
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index c9945e69b1..bc62f201a8 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -194,6 +194,10 @@ qtests_aspeed = \
['aspeed_hace-test',
'aspeed_smc-test',
'aspeed_gpio-test']
+
+qtests_stm32l4x5 = \
+ ['stm32l4x5_exti-test']
+
qtests_arm = \
(config_all_devices.has_key('CONFIG_MPS2') ? ['sse-timer-test'] : []) + \
(config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ?
['cmsdk-apb-dualtimer-test'] : []) + \
@@ -207,6 +211,7 @@ qtests_arm = \
(config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] :
[]) + \
(config_all_devices.has_key('CONFIG_VEXPRESS') ? ['test-arm-mptimer'] : [])
+ \
(config_all_devices.has_key('CONFIG_MICROBIT') ? ['microbit-test'] : []) + \
+ (config_all_devices.has_key('CONFIG_STM32L4X5_SOC') ? qtests_stm32l4x5 : [])
+ \
['arm-cpu-features',
'boot-serial-test']
diff --git a/tests/qtest/stm32l4x5_exti-test.c
b/tests/qtest/stm32l4x5_exti-test.c
new file mode 100644
index 0000000000..b165111579
--- /dev/null
+++ b/tests/qtest/stm32l4x5_exti-test.c
@@ -0,0 +1,104 @@
+/*
+ * QTest testcase for STML4XX_EXTI
+ *
+ * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest-single.h"
+
+#define EXTI_BASE_ADDR 0x40010400
+#define EXTI_IMR1 0x00
+#define EXTI_EMR1 0x04
+#define EXTI_RTSR1 0x08
+#define EXTI_FTSR1 0x0C
+#define EXTI_SWIER1 0x10
+#define EXTI_PR1 0x14
+#define EXTI_IMR2 0x20
+#define EXTI_EMR2 0x24
+#define EXTI_RTSR2 0x28
+#define EXTI_FTSR2 0x2C
+#define EXTI_SWIER2 0x30
+#define EXTI_PR2 0x34
+
+#define GPIO_0_IRQ 6
+
+static void exti_writel(unsigned int offset, uint32_t value)
+{
+ writel(EXTI_BASE_ADDR + offset, value);
+}
+
+static uint32_t exti_readl(unsigned int offset)
+{
+ return readl(EXTI_BASE_ADDR + offset);
+}
+
+static void test_write_read(void)
+{
+ /* Test that we can write and retrieve a value from the device */
+ exti_writel(EXTI_IMR1, 0xFFFFFFFF);
+ const uint32_t imr1 = exti_readl(EXTI_IMR1);
+ g_assert_cmpuint(imr1, ==, 0xFFFFFFFF);
+
+ /* Test that reserved address are not written to */
+ exti_writel(EXTI_IMR2, 0xFFFFFFFF);
+ const uint32_t imr2 = exti_readl(EXTI_IMR2);
+ g_assert_cmpuint(imr2, ==, 0x000000FF);
+}
+
+static void test_direct_lines_write(void)
+{
+ /* Test that Direct Lines are not written to */
+ exti_writel(EXTI_RTSR2, 0xFFFFFFFF);
+ const uint32_t rtsr2 = exti_readl(EXTI_RTSR2);
+ g_assert_cmpuint(rtsr2, ==, 0x00000078);
+}
+
+static void test_software_interrupt(void)
+{
+ /* Test that we can launch irq using software in*/
+
+ g_assert_false(get_irq(GPIO_0_IRQ));
+ /* Bit 0 corresponds to GPIO Px_0 */
+ exti_writel(EXTI_IMR1, 0x00000001);
+ exti_writel(EXTI_SWIER1, 0x00000001);
+ uint32_t swier1 = exti_readl(EXTI_SWIER1);
+ uint32_t pr1 = exti_readl(EXTI_PR1);
+
+ g_assert_cmpuint(swier1, ==, 0x00000001);
+ g_assert_cmpuint(pr1, ==, 0x00000001);
+
+ g_assert_true(get_irq(GPIO_0_IRQ));
+
+ /* Reset the irq and check the registers state */
+ exti_writel(EXTI_PR1, 0x00000001);
+ swier1 = exti_readl(EXTI_SWIER1);
+ pr1 = exti_readl(EXTI_PR1);
+ g_assert_cmpuint(swier1, ==, 0x00000000);
+ g_assert_cmpuint(pr1, ==, 0x00000000);
+}
+
+int main(int argc, char **argv)
+{
+ int ret;
+
+ g_test_init(&argc, &argv, NULL);
+ g_test_set_nonfatal_assertions();
+
+ qtest_add_func("stm32l4x5/exti/write_read", test_write_read);
+ qtest_add_func("stm32l4x5/exti/direct_lines_write",
test_direct_lines_write);
+ /* Fails for now, not implemented */
+ qtest_add_func("stm32l4x5/exti/software_interrupt",
test_software_interrupt);
+
+ qtest_start("-machine b-l475e-iot01a");
+ /* The qom path is correct but does it do anything ?*/
+ qtest_irq_intercept_in(global_qtest, "/machine/unattached/device[0]/exti");
+ ret = g_test_run();
+ qtest_end();
+
+ return ret;
+}
--
2.38.5