[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-block] [PATCH v6 5/5] iotests: chown LUKS device before qemu-io la
|
From: |
Daniel P. Berrange |
|
Subject: |
[Qemu-block] [PATCH v6 5/5] iotests: chown LUKS device before qemu-io launches |
|
Date: |
Mon, 26 Jun 2017 13:35:10 +0100 |
On some distros, whenever you close a block device file
descriptor there is a udev rule that resets the file
permissions. This can race with the test script when
we run qemu-io multiple times against the same block
device. Occasionally the second qemu-io invocation
will find udev has reset the permissions causing failure.
Reviewed-by: Max Reitz <address@hidden>
Reviewed-by: Eric Blake <address@hidden>
Signed-off-by: Daniel P. Berrange <address@hidden>
---
tests/qemu-iotests/149 | 12 +-
tests/qemu-iotests/149.out | 344 ++++++++++++++++++++++-----------------------
2 files changed, 177 insertions(+), 179 deletions(-)
diff --git a/tests/qemu-iotests/149 b/tests/qemu-iotests/149
index 5faf585..223cd68 100755
--- a/tests/qemu-iotests/149
+++ b/tests/qemu-iotests/149
@@ -186,7 +186,7 @@ def chown(config):
msg = proc.communicate()[0]
if proc.returncode != 0:
- raise Exception("Cannot change owner on %s" % path)
+ raise Exception(msg)
def cryptsetup_open(config):
@@ -271,6 +271,8 @@ def qemu_io_image_args(config, dev=False):
def qemu_io_write_pattern(config, pattern, offset_mb, size_mb, dev=False):
"""Write a pattern of data to a LUKS image or device"""
+ if dev:
+ chown(config)
args = ["-c", "write -P 0x%x %dM %dM" % (pattern, offset_mb, size_mb)]
args.extend(qemu_io_image_args(config, dev))
iotests.log("qemu-io " + " ".join(args), filters=[iotests.filter_test_dir])
@@ -281,6 +283,8 @@ def qemu_io_write_pattern(config, pattern, offset_mb,
size_mb, dev=False):
def qemu_io_read_pattern(config, pattern, offset_mb, size_mb, dev=False):
"""Read a pattern of data to a LUKS image or device"""
+ if dev:
+ chown(config)
args = ["-c", "read -P 0x%x %dM %dM" % (pattern, offset_mb, size_mb)]
args.extend(qemu_io_image_args(config, dev))
iotests.log("qemu-io " + " ".join(args), filters=[iotests.filter_test_dir])
@@ -331,9 +335,6 @@ def test_once(config, qemu_img=False):
cryptsetup_open(config)
try:
- iotests.log("# Set dev owner")
- chown(config)
-
iotests.log("# Write test pattern 0xa7")
qemu_io_write_pattern(config, 0xa7, lowOffsetMB, 10, dev=True)
iotests.log("# Write test pattern 0x13")
@@ -365,9 +366,6 @@ def test_once(config, qemu_img=False):
cryptsetup_open(config)
try:
- iotests.log("# Set dev owner")
- chown(config)
-
iotests.log("# Read test pattern 0x91")
qemu_io_read_pattern(config, 0x91, lowOffsetMB, 10, dev=True)
iotests.log("# Read test pattern 0x5e")
diff --git a/tests/qemu-iotests/149.out b/tests/qemu-iotests/149.out
index 2f0454f..5dea00b 100644
--- a/tests/qemu-iotests/149.out
+++ b/tests/qemu-iotests/149.out
@@ -5,14 +5,14 @@ truncate TEST_DIR/luks-aes-256-xts-plain64-sha1.img --size
4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-xts-plain64-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img
qiotest-145-aes-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -41,14 +41,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img
qiotest-145-aes-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -65,14 +65,14 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha1.img',
fmt=luks size=439804651
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img
qiotest-145-aes-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -101,14 +101,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img
qiotest-145-aes-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -125,14 +125,14 @@ truncate TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 512
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
qiotest-145-twofish-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -161,14 +161,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
qiotest-145-twofish-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -185,14 +185,14 @@ Formatting
'TEST_DIR/luks-twofish-256-xts-plain64-sha1.img', fmt=luks size=43980
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
qiotest-145-twofish-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -221,14 +221,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
qiotest-145-twofish-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -245,14 +245,14 @@ truncate TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 512
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
qiotest-145-serpent-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -281,14 +281,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
qiotest-145-serpent-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -305,14 +305,14 @@ Formatting
'TEST_DIR/luks-serpent-256-xts-plain64-sha1.img', fmt=luks size=43980
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
qiotest-145-serpent-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -341,14 +341,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
qiotest-145-serpent-256-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -365,14 +365,14 @@ truncate TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher cast5-cbc-plain64 --key-size 128
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
qiotest-145-cast5-128-cbc-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -401,14 +401,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
qiotest-145-cast5-128-cbc-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -425,14 +425,14 @@ Formatting
'TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img', fmt=luks size=4398046
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
qiotest-145-cast5-128-cbc-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -461,14 +461,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
qiotest-145-cast5-128-cbc-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -486,14 +486,14 @@ truncate TEST_DIR/luks-aes-256-cbc-plain-sha1.img --size
4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain --key-size 256 --hash
sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-cbc-plain-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img
qiotest-145-aes-256-cbc-plain-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -522,14 +522,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img
qiotest-145-aes-256-cbc-plain-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -546,14 +546,14 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-plain-sha1.img',
fmt=luks size=43980465111
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img
qiotest-145-aes-256-cbc-plain-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -582,14 +582,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img
qiotest-145-aes-256-cbc-plain-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -606,14 +606,14 @@ truncate TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain64 --key-size 256
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
qiotest-145-aes-256-cbc-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -642,14 +642,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
qiotest-145-aes-256-cbc-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -666,14 +666,14 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-plain64-sha1.img',
fmt=luks size=439804651
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
qiotest-145-aes-256-cbc-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -702,14 +702,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
qiotest-145-aes-256-cbc-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -726,14 +726,14 @@ truncate TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
qiotest-145-aes-256-cbc-essiv-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -762,14 +762,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
qiotest-145-aes-256-cbc-essiv-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -786,14 +786,14 @@ Formatting
'TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img', fmt=luks size=4398
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
qiotest-145-aes-256-cbc-essiv-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -822,14 +822,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
qiotest-145-aes-256-cbc-essiv-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -846,14 +846,14 @@ truncate TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-xts-essiv:sha256 --key-size 512
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
qiotest-145-aes-256-xts-essiv-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -882,14 +882,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
qiotest-145-aes-256-xts-essiv-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -906,14 +906,14 @@ Formatting
'TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img', fmt=luks size=4398
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
qiotest-145-aes-256-xts-essiv-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -942,14 +942,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
qiotest-145-aes-256-xts-essiv-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -966,14 +966,14 @@ truncate
TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img --size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 256
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
qiotest-145-aes-128-xts-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1002,14 +1002,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
qiotest-145-aes-128-xts-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1026,14 +1026,14 @@ Formatting
'TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img', fmt=luks size=43
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
qiotest-145-aes-128-xts-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1062,14 +1062,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
qiotest-145-aes-128-xts-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1086,14 +1086,14 @@ truncate
TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img --size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 384
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
qiotest-145-aes-192-xts-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1122,14 +1122,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
qiotest-145-aes-192-xts-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1146,14 +1146,14 @@ Formatting
'TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img', fmt=luks size=43
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
qiotest-145-aes-192-xts-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1182,14 +1182,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
qiotest-145-aes-192-xts-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1206,14 +1206,14 @@ truncate TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 256
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
qiotest-145-twofish-128-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1242,14 +1242,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
qiotest-145-twofish-128-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1266,14 +1266,14 @@ Formatting
'TEST_DIR/luks-twofish-128-xts-plain64-sha1.img', fmt=luks size=43980
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
qiotest-145-twofish-128-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1302,14 +1302,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
qiotest-145-twofish-128-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1327,14 +1327,14 @@ truncate TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 256
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
qiotest-145-serpent-128-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1363,14 +1363,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
qiotest-145-serpent-128-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1387,14 +1387,14 @@ Formatting
'TEST_DIR/luks-serpent-128-xts-plain64-sha1.img', fmt=luks size=43980
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
qiotest-145-serpent-128-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1423,14 +1423,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
qiotest-145-serpent-128-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1447,14 +1447,14 @@ truncate TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 384
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
qiotest-145-serpent-192-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1483,14 +1483,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
qiotest-145-serpent-192-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1507,14 +1507,14 @@ Formatting
'TEST_DIR/luks-serpent-192-xts-plain64-sha1.img', fmt=luks size=43980
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
qiotest-145-serpent-192-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1543,14 +1543,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
qiotest-145-serpent-192-xts-plain64-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1569,14 +1569,14 @@ truncate TEST_DIR/luks-aes-256-xts-plain64-sha224.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512
--hash sha224 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-xts-plain64-sha224.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img
qiotest-145-aes-256-xts-plain64-sha224
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1605,14 +1605,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img
qiotest-145-aes-256-xts-plain64-sha224
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1629,14 +1629,14 @@ Formatting
'TEST_DIR/luks-aes-256-xts-plain64-sha224.img', fmt=luks size=4398046
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img
qiotest-145-aes-256-xts-plain64-sha224
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1665,14 +1665,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img
qiotest-145-aes-256-xts-plain64-sha224
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1689,14 +1689,14 @@ truncate TEST_DIR/luks-aes-256-xts-plain64-sha256.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512
--hash sha256 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-xts-plain64-sha256.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img
qiotest-145-aes-256-xts-plain64-sha256
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1725,14 +1725,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img
qiotest-145-aes-256-xts-plain64-sha256
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1749,14 +1749,14 @@ Formatting
'TEST_DIR/luks-aes-256-xts-plain64-sha256.img', fmt=luks size=4398046
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img
qiotest-145-aes-256-xts-plain64-sha256
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1785,14 +1785,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img
qiotest-145-aes-256-xts-plain64-sha256
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1809,14 +1809,14 @@ truncate TEST_DIR/luks-aes-256-xts-plain64-sha384.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512
--hash sha384 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-xts-plain64-sha384.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img
qiotest-145-aes-256-xts-plain64-sha384
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1845,14 +1845,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img
qiotest-145-aes-256-xts-plain64-sha384
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1869,14 +1869,14 @@ Formatting
'TEST_DIR/luks-aes-256-xts-plain64-sha384.img', fmt=luks size=4398046
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img
qiotest-145-aes-256-xts-plain64-sha384
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1905,14 +1905,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img
qiotest-145-aes-256-xts-plain64-sha384
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1929,14 +1929,14 @@ truncate TEST_DIR/luks-aes-256-xts-plain64-sha512.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512
--hash sha512 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-xts-plain64-sha512.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img
qiotest-145-aes-256-xts-plain64-sha512
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1965,14 +1965,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img
qiotest-145-aes-256-xts-plain64-sha512
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1989,14 +1989,14 @@ Formatting
'TEST_DIR/luks-aes-256-xts-plain64-sha512.img', fmt=luks size=4398046
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img
qiotest-145-aes-256-xts-plain64-sha512
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2025,14 +2025,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img
qiotest-145-aes-256-xts-plain64-sha512
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2049,14 +2049,14 @@ truncate
TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img --size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512
--hash ripemd160 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img
qiotest-145-aes-256-xts-plain64-ripemd160
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2085,14 +2085,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img
qiotest-145-aes-256-xts-plain64-ripemd160
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2109,14 +2109,14 @@ Formatting
'TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img', fmt=luks size=4398
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img
qiotest-145-aes-256-xts-plain64-ripemd160
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2145,14 +2145,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img
qiotest-145-aes-256-xts-plain64-ripemd160
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2169,14 +2169,14 @@ truncate
TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img --size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain --key-size 512 --hash
sha1 --key-slot 3 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
qiotest-145-aes-256-xts-plain-sha1-pwslot3
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2205,14 +2205,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
qiotest-145-aes-256-xts-plain-sha1-pwslot3
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2243,14 +2243,14 @@ sudo cryptsetup -q -v luksAddKey
TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots
sudo cryptsetup -q -v luksAddKey
TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 7 --key-file -
--iter-time 10 TEST_DIR/passwd.txt
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
qiotest-145-aes-256-xts-plain-sha1-pwallslots
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2279,14 +2279,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
qiotest-145-aes-256-xts-plain-sha1-pwallslots
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2303,14 +2303,14 @@ Formatting
'TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img', fmt=luks size=
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
qiotest-145-aes-256-xts-plain-sha1-pwallslots
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2339,14 +2339,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
qiotest-145-aes-256-xts-plain-sha1-pwallslots
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2363,14 +2363,14 @@ truncate TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
--size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256
--hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
qiotest-145-aes-256-cbc-essiv-auto-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2399,14 +2399,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
qiotest-145-aes-256-cbc-essiv-auto-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2423,14 +2423,14 @@ Formatting
'TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img', fmt=luks size=439804
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
qiotest-145-aes-256-cbc-essiv-auto-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2459,14 +2459,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
qiotest-145-aes-256-cbc-essiv-auto-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2483,14 +2483,14 @@ truncate
TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img --size 4194304MB
sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain64:sha256 --key-size
256 --hash sha1 --key-slot 0 --key-file - --iter-time 10
TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
qiotest-145-aes-256-cbc-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2519,14 +2519,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
qiotest-145-aes-256-cbc-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2543,14 +2543,14 @@ Formatting
'TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img', fmt=luks size=43
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
qiotest-145-aes-256-cbc-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
# Write test pattern 0xa7
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
qemu-io -c write -P 0xa7 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
qemu-io -c write -P 0x13 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2579,14 +2579,14 @@ wrote 10485760/10485760 bytes at offset 3298534883328
# Open dev
sudo cryptsetup -q -v luksOpen
TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
qiotest-145-aes-256-cbc-plain64-sha256-sha1
-# Set dev owner
-sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
# Read test pattern 0x91
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
qemu-io -c read -P 0x91 100M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
+sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
qemu-io -c read -P 0x5e 3145728M 10M --image-opts
driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
--
2.9.3
- [Qemu-block] [PATCH v6 0/5] Improve I/O tests coverage of LUKS driver, Daniel P. Berrange, 2017/06/26
- [Qemu-block] [PATCH v6 1/5] iotests: skip 159 & 170 with luks format, Daniel P. Berrange, 2017/06/26
- [Qemu-block] [PATCH v6 2/5] iotests: fix remainining tests to work with LUKS, Daniel P. Berrange, 2017/06/26
- [Qemu-block] [PATCH v6 4/5] iotests: add more LUKS hash combination tests, Daniel P. Berrange, 2017/06/26
- [Qemu-block] [PATCH v6 3/5] iotests: reduce PBKDF iterations when testing LUKS, Daniel P. Berrange, 2017/06/26
- [Qemu-block] [PATCH v6 5/5] iotests: chown LUKS device before qemu-io launches,
Daniel P. Berrange <=
- Re: [Qemu-block] [Qemu-devel] [PATCH v6 0/5] Improve I/O tests coverage of LUKS driver, no-reply, 2017/06/27
- Re: [Qemu-block] [PATCH v6 0/5] Improve I/O tests coverage of LUKS driver, Max Reitz, 2017/06/30