[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-block] [PULL 25/30] qapi: Empty out qapi-schema.json
|
From: |
Eric Blake |
|
Subject: |
[Qemu-block] [PULL 25/30] qapi: Empty out qapi-schema.json |
|
Date: |
Thu, 1 Mar 2018 13:42:40 -0600 |
From: Markus Armbruster <address@hidden>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <address@hidden>
Message-Id: <address@hidden>
[eblake: rebase to master]
Signed-off-by: Eric Blake <address@hidden>
---
Makefile | 9 +
Makefile.objs | 4 +
qapi-schema.json | 3200 +----------------------------------
qapi/misc.json | 3201 ++++++++++++++++++++++++++++++++++++
include/hw/qdev-properties.h | 3 +-
include/monitor/monitor.h | 2 +-
include/sysemu/arch_init.h | 2 +-
include/sysemu/balloon.h | 2 +-
include/sysemu/dump.h | 2 +-
include/sysemu/hostmem.h | 2 +-
include/sysemu/replay.h | 3 +-
vl.c | 4 +-
arch_init.c | 2 +-
balloon.c | 2 +-
block/iscsi.c | 2 +-
cpus.c | 2 +-
dump.c | 4 +-
hmp.c | 10 +-
hw/acpi/core.c | 2 +-
hw/acpi/cpu.c | 2 +-
hw/acpi/memory_hotplug.c | 2 +-
hw/acpi/vmgenid.c | 2 +-
hw/core/qdev.c | 2 +-
hw/i386/xen/xen-hvm.c | 2 +-
hw/ipmi/ipmi.c | 2 +-
hw/pci/pci-stub.c | 2 +-
hw/pci/pci.c | 2 +-
hw/ppc/spapr_rtc.c | 2 +-
hw/s390x/s390-skeys.c | 2 +-
hw/timer/mc146818rtc.c | 4 +-
hw/virtio/virtio-balloon.c | 2 +-
hw/watchdog/watchdog.c | 2 +-
iothread.c | 2 +-
migration/savevm.c | 3 +-
numa.c | 4 +-
qdev-monitor.c | 2 +-
qmp.c | 4 +-
stubs/uuid.c | 2 +-
stubs/vmgenid.c | 2 +-
stubs/xen-hvm.c | 2 +-
target/arm/monitor.c | 3 +-
target/i386/cpu.c | 4 +-
tests/qmp-test.c | 3 +-
tests/test-qobject-input-visitor.c | 2 +-
tests/test-visitor-serialization.c | 1 -
ui/gtk.c | 2 +-
util/qemu-config.c | 2 +-
.gitignore | 4 +
48 files changed, 3282 insertions(+), 3246 deletions(-)
create mode 100644 qapi/misc.json
diff --git a/Makefile b/Makefile
index b12fcd5d8ff..26ed98e0300 100644
--- a/Makefile
+++ b/Makefile
@@ -99,6 +99,7 @@ GENERATED_FILES += qapi/qapi-types-common.h
qapi/qapi-types-common.c
GENERATED_FILES += qapi/qapi-types-crypto.h qapi/qapi-types-crypto.c
GENERATED_FILES += qapi/qapi-types-introspect.h qapi/qapi-types-introspect.c
GENERATED_FILES += qapi/qapi-types-migration.h qapi/qapi-types-migration.c
+GENERATED_FILES += qapi/qapi-types-misc.h qapi/qapi-types-misc.c
GENERATED_FILES += qapi/qapi-types-net.h qapi/qapi-types-net.c
GENERATED_FILES += qapi/qapi-types-rocker.h qapi/qapi-types-rocker.c
GENERATED_FILES += qapi/qapi-types-run-state.h qapi/qapi-types-run-state.c
@@ -116,6 +117,7 @@ GENERATED_FILES += qapi/qapi-visit-common.h
qapi/qapi-visit-common.c
GENERATED_FILES += qapi/qapi-visit-crypto.h qapi/qapi-visit-crypto.c
GENERATED_FILES += qapi/qapi-visit-introspect.h qapi/qapi-visit-introspect.c
GENERATED_FILES += qapi/qapi-visit-migration.h qapi/qapi-visit-migration.c
+GENERATED_FILES += qapi/qapi-visit-misc.h qapi/qapi-visit-misc.c
GENERATED_FILES += qapi/qapi-visit-net.h qapi/qapi-visit-net.c
GENERATED_FILES += qapi/qapi-visit-rocker.h qapi/qapi-visit-rocker.c
GENERATED_FILES += qapi/qapi-visit-run-state.h qapi/qapi-visit-run-state.c
@@ -132,6 +134,7 @@ GENERATED_FILES += qapi/qapi-commands-common.h
qapi/qapi-commands-common.c
GENERATED_FILES += qapi/qapi-commands-crypto.h qapi/qapi-commands-crypto.c
GENERATED_FILES += qapi/qapi-commands-introspect.h
qapi/qapi-commands-introspect.c
GENERATED_FILES += qapi/qapi-commands-migration.h
qapi/qapi-commands-migration.c
+GENERATED_FILES += qapi/qapi-commands-misc.h qapi/qapi-commands-misc.c
GENERATED_FILES += qapi/qapi-commands-net.h qapi/qapi-commands-net.c
GENERATED_FILES += qapi/qapi-commands-rocker.h qapi/qapi-commands-rocker.c
GENERATED_FILES += qapi/qapi-commands-run-state.h
qapi/qapi-commands-run-state.c
@@ -148,6 +151,7 @@ GENERATED_FILES += qapi/qapi-events-common.h
qapi/qapi-events-common.c
GENERATED_FILES += qapi/qapi-events-crypto.h qapi/qapi-events-crypto.c
GENERATED_FILES += qapi/qapi-events-introspect.h qapi/qapi-events-introspect.c
GENERATED_FILES += qapi/qapi-events-migration.h qapi/qapi-events-migration.c
+GENERATED_FILES += qapi/qapi-events-misc.h qapi/qapi-events-misc.c
GENERATED_FILES += qapi/qapi-events-net.h qapi/qapi-events-net.c
GENERATED_FILES += qapi/qapi-events-rocker.h qapi/qapi-events-rocker.c
GENERATED_FILES += qapi/qapi-events-run-state.h qapi/qapi-events-run-state.c
@@ -573,6 +577,7 @@ qapi-modules = $(SRC_PATH)/qapi-schema.json
$(SRC_PATH)/qapi/common.json \
$(SRC_PATH)/qapi/crypto.json \
$(SRC_PATH)/qapi/introspect.json \
$(SRC_PATH)/qapi/migration.json \
+ $(SRC_PATH)/qapi/misc.json \
$(SRC_PATH)/qapi/net.json \
$(SRC_PATH)/qapi/rocker.json \
$(SRC_PATH)/qapi/run-state.json \
@@ -591,6 +596,7 @@ qapi/qapi-types-common.c qapi/qapi-types-common.h \
qapi/qapi-types-crypto.c qapi/qapi-types-crypto.h \
qapi/qapi-types-introspect.c qapi/qapi-types-introspect.h \
qapi/qapi-types-migration.c qapi/qapi-types-migration.h \
+qapi/qapi-types-misc.c qapi/qapi-types-misc.h \
qapi/qapi-types-net.c qapi/qapi-types-net.h \
qapi/qapi-types-rocker.c qapi/qapi-types-rocker.h \
qapi/qapi-types-run-state.c qapi/qapi-types-run-state.h \
@@ -608,6 +614,7 @@ qapi/qapi-visit-common.c qapi/qapi-visit-common.h \
qapi/qapi-visit-crypto.c qapi/qapi-visit-crypto.h \
qapi/qapi-visit-introspect.c qapi/qapi-visit-introspect.h \
qapi/qapi-visit-migration.c qapi/qapi-visit-migration.h \
+qapi/qapi-visit-misc.c qapi/qapi-visit-misc.h \
qapi/qapi-visit-net.c qapi/qapi-visit-net.h \
qapi/qapi-visit-rocker.c qapi/qapi-visit-rocker.h \
qapi/qapi-visit-run-state.c qapi/qapi-visit-run-state.h \
@@ -624,6 +631,7 @@ qapi/qapi-commands-common.c qapi/qapi-commands-common.h \
qapi/qapi-commands-crypto.c qapi/qapi-commands-crypto.h \
qapi/qapi-commands-introspect.c qapi/qapi-commands-introspect.h \
qapi/qapi-commands-migration.c qapi/qapi-commands-migration.h \
+qapi/qapi-commands-misc.c qapi/qapi-commands-misc.h \
qapi/qapi-commands-net.c qapi/qapi-commands-net.h \
qapi/qapi-commands-rocker.c qapi/qapi-commands-rocker.h \
qapi/qapi-commands-run-state.c qapi/qapi-commands-run-state.h \
@@ -640,6 +648,7 @@ qapi/qapi-events-common.c qapi/qapi-events-common.h \
qapi/qapi-events-crypto.c qapi/qapi-events-crypto.h \
qapi/qapi-events-introspect.c qapi/qapi-events-introspect.h \
qapi/qapi-events-migration.c qapi/qapi-events-migration.h \
+qapi/qapi-events-misc.c qapi/qapi-events-misc.h \
qapi/qapi-events-net.c qapi/qapi-events-net.h \
qapi/qapi-events-rocker.c qapi/qapi-events-rocker.h \
qapi/qapi-events-run-state.c qapi/qapi-events-run-state.h \
diff --git a/Makefile.objs b/Makefile.objs
index 5dc7a13c726..149627b5890 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -11,6 +11,7 @@ util-obj-y += qapi/qapi-types-common.o
util-obj-y += qapi/qapi-types-crypto.o
util-obj-y += qapi/qapi-types-introspect.o
util-obj-y += qapi/qapi-types-migration.o
+util-obj-y += qapi/qapi-types-misc.o
util-obj-y += qapi/qapi-types-net.o
util-obj-y += qapi/qapi-types-rocker.o
util-obj-y += qapi/qapi-types-run-state.o
@@ -28,6 +29,7 @@ util-obj-y += qapi/qapi-visit-common.o
util-obj-y += qapi/qapi-visit-crypto.o
util-obj-y += qapi/qapi-visit-introspect.o
util-obj-y += qapi/qapi-visit-migration.o
+util-obj-y += qapi/qapi-visit-misc.o
util-obj-y += qapi/qapi-visit-net.o
util-obj-y += qapi/qapi-visit-rocker.o
util-obj-y += qapi/qapi-visit-run-state.o
@@ -44,6 +46,7 @@ util-obj-y += qapi/qapi-events-common.o
util-obj-y += qapi/qapi-events-crypto.o
util-obj-y += qapi/qapi-events-introspect.o
util-obj-y += qapi/qapi-events-migration.o
+util-obj-y += qapi/qapi-events-misc.o
util-obj-y += qapi/qapi-events-net.o
util-obj-y += qapi/qapi-events-rocker.o
util-obj-y += qapi/qapi-events-run-state.o
@@ -136,6 +139,7 @@ common-obj-y += qapi/qapi-commands-common.o
common-obj-y += qapi/qapi-commands-crypto.o
common-obj-y += qapi/qapi-commands-introspect.o
common-obj-y += qapi/qapi-commands-migration.o
+common-obj-y += qapi/qapi-commands-misc.o
common-obj-y += qapi/qapi-commands-net.o
common-obj-y += qapi/qapi-commands-rocker.o
common-obj-y += qapi/qapi-commands-run-state.o
diff --git a/qapi-schema.json b/qapi-schema.json
index 3c1abf27005..689d06c5304 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -92,3202 +92,4 @@
{ 'include': 'qapi/transaction.json' }
{ 'include': 'qapi/trace.json' }
{ 'include': 'qapi/introspect.json' }
-
-##
-# = Miscellanea
-##
-
-##
-# @qmp_capabilities:
-#
-# Enable QMP capabilities.
-#
-# Arguments: None.
-#
-# Example:
-#
-# -> { "execute": "qmp_capabilities" }
-# <- { "return": {} }
-#
-# Notes: This command is valid exactly when first connecting: it must be
-# issued before any other command will be accepted, and will fail once the
-# monitor is accepting other commands. (see qemu docs/interop/qmp-spec.txt)
-#
-# Since: 0.13
-#
-##
-{ 'command': 'qmp_capabilities' }
-
-##
-# @VersionTriple:
-#
-# A three-part version number.
-#
-# @major: The major version number.
-#
-# @minor: The minor version number.
-#
-# @micro: The micro version number.
-#
-# Since: 2.4
-##
-{ 'struct': 'VersionTriple',
- 'data': {'major': 'int', 'minor': 'int', 'micro': 'int'} }
-
-
-##
-# @VersionInfo:
-#
-# A description of QEMU's version.
-#
-# @qemu: The version of QEMU. By current convention, a micro
-# version of 50 signifies a development branch. A micro version
-# greater than or equal to 90 signifies a release candidate for
-# the next minor version. A micro version of less than 50
-# signifies a stable release.
-#
-# @package: QEMU will always set this field to an empty string. Downstream
-# versions of QEMU should set this to a non-empty string. The
-# exact format depends on the downstream however it highly
-# recommended that a unique name is used.
-#
-# Since: 0.14.0
-##
-{ 'struct': 'VersionInfo',
- 'data': {'qemu': 'VersionTriple', 'package': 'str'} }
-
-##
-# @query-version:
-#
-# Returns the current version of QEMU.
-#
-# Returns: A @VersionInfo object describing the current version of QEMU.
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "query-version" }
-# <- {
-# "return":{
-# "qemu":{
-# "major":0,
-# "minor":11,
-# "micro":5
-# },
-# "package":""
-# }
-# }
-#
-##
-{ 'command': 'query-version', 'returns': 'VersionInfo' }
-
-##
-# @CommandInfo:
-#
-# Information about a QMP command
-#
-# @name: The command name
-#
-# Since: 0.14.0
-##
-{ 'struct': 'CommandInfo', 'data': {'name': 'str'} }
-
-##
-# @query-commands:
-#
-# Return a list of supported QMP commands by this server
-#
-# Returns: A list of @CommandInfo for all supported commands
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "query-commands" }
-# <- {
-# "return":[
-# {
-# "name":"query-balloon"
-# },
-# {
-# "name":"system_powerdown"
-# }
-# ]
-# }
-#
-# Note: This example has been shortened as the real response is too long.
-#
-##
-{ 'command': 'query-commands', 'returns': ['CommandInfo'] }
-
-##
-# @LostTickPolicy:
-#
-# Policy for handling lost ticks in timer devices.
-#
-# @discard: throw away the missed tick(s) and continue with future injection
-# normally. Guest time may be delayed, unless the OS has explicit
-# handling of lost ticks
-#
-# @delay: continue to deliver ticks at the normal rate. Guest time will be
-# delayed due to the late tick
-#
-# @merge: merge the missed tick(s) into one tick and inject. Guest time
-# may be delayed, depending on how the OS reacts to the merging
-# of ticks
-#
-# @slew: deliver ticks at a higher rate to catch up with the missed tick. The
-# guest time should not be delayed once catchup is complete.
-#
-# Since: 2.0
-##
-{ 'enum': 'LostTickPolicy',
- 'data': ['discard', 'delay', 'merge', 'slew' ] }
-
-##
-# @add_client:
-#
-# Allow client connections for VNC, Spice and socket based
-# character devices to be passed in to QEMU via SCM_RIGHTS.
-#
-# @protocol: protocol name. Valid names are "vnc", "spice" or the
-# name of a character device (eg. from -chardev id=XXXX)
-#
-# @fdname: file descriptor name previously passed via 'getfd' command
-#
-# @skipauth: whether to skip authentication. Only applies
-# to "vnc" and "spice" protocols
-#
-# @tls: whether to perform TLS. Only applies to the "spice"
-# protocol
-#
-# Returns: nothing on success.
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "add_client", "arguments": { "protocol": "vnc",
-# "fdname": "myclient" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'add_client',
- 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool',
- '*tls': 'bool' } }
-
-##
-# @NameInfo:
-#
-# Guest name information.
-#
-# @name: The name of the guest
-#
-# Since: 0.14.0
-##
-{ 'struct': 'NameInfo', 'data': {'*name': 'str'} }
-
-##
-# @query-name:
-#
-# Return the name information of a guest.
-#
-# Returns: @NameInfo of the guest
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "query-name" }
-# <- { "return": { "name": "qemu-name" } }
-#
-##
-{ 'command': 'query-name', 'returns': 'NameInfo' }
-
-##
-# @KvmInfo:
-#
-# Information about support for KVM acceleration
-#
-# @enabled: true if KVM acceleration is active
-#
-# @present: true if KVM acceleration is built into this executable
-#
-# Since: 0.14.0
-##
-{ 'struct': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} }
-
-##
-# @query-kvm:
-#
-# Returns information about KVM acceleration
-#
-# Returns: @KvmInfo
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "query-kvm" }
-# <- { "return": { "enabled": true, "present": true } }
-#
-##
-{ 'command': 'query-kvm', 'returns': 'KvmInfo' }
-
-##
-# @UuidInfo:
-#
-# Guest UUID information (Universally Unique Identifier).
-#
-# @UUID: the UUID of the guest
-#
-# Since: 0.14.0
-#
-# Notes: If no UUID was specified for the guest, a null UUID is returned.
-##
-{ 'struct': 'UuidInfo', 'data': {'UUID': 'str'} }
-
-##
-# @query-uuid:
-#
-# Query the guest UUID information.
-#
-# Returns: The @UuidInfo for the guest
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "query-uuid" }
-# <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
-#
-##
-{ 'command': 'query-uuid', 'returns': 'UuidInfo' }
-
-##
-# @EventInfo:
-#
-# Information about a QMP event
-#
-# @name: The event name
-#
-# Since: 1.2.0
-##
-{ 'struct': 'EventInfo', 'data': {'name': 'str'} }
-
-##
-# @query-events:
-#
-# Return a list of supported QMP events by this server
-#
-# Returns: A list of @EventInfo for all supported events
-#
-# Since: 1.2.0
-#
-# Example:
-#
-# -> { "execute": "query-events" }
-# <- {
-# "return": [
-# {
-# "name":"SHUTDOWN"
-# },
-# {
-# "name":"RESET"
-# }
-# ]
-# }
-#
-# Note: This example has been shortened as the real response is too long.
-#
-##
-{ 'command': 'query-events', 'returns': ['EventInfo'] }
-
-##
-# @CpuInfoArch:
-#
-# An enumeration of cpu types that enable additional information during
-# @query-cpus and @query-cpus-fast.
-#
-# @s390: since 2.12
-#
-# Since: 2.6
-##
-{ 'enum': 'CpuInfoArch',
- 'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 's390', 'other' ] }
-
-##
-# @CpuInfo:
-#
-# Information about a virtual CPU
-#
-# @CPU: the index of the virtual CPU
-#
-# @current: this only exists for backwards compatibility and should be ignored
-#
-# @halted: true if the virtual CPU is in the halt state. Halt usually refers
-# to a processor specific low power mode.
-#
-# @qom_path: path to the CPU object in the QOM tree (since 2.4)
-#
-# @thread_id: ID of the underlying host thread
-#
-# @props: properties describing to which node/socket/core/thread
-# virtual CPU belongs to, provided if supported by board (since 2.10)
-#
-# @arch: architecture of the cpu, which determines which additional fields
-# will be listed (since 2.6)
-#
-# Since: 0.14.0
-#
-# Notes: @halted is a transient state that changes frequently. By the time the
-# data is sent to the client, the guest may no longer be halted.
-##
-{ 'union': 'CpuInfo',
- 'base': {'CPU': 'int', 'current': 'bool', 'halted': 'bool',
- 'qom_path': 'str', 'thread_id': 'int',
- '*props': 'CpuInstanceProperties', 'arch': 'CpuInfoArch' },
- 'discriminator': 'arch',
- 'data': { 'x86': 'CpuInfoX86',
- 'sparc': 'CpuInfoSPARC',
- 'ppc': 'CpuInfoPPC',
- 'mips': 'CpuInfoMIPS',
- 'tricore': 'CpuInfoTricore',
- 's390': 'CpuInfoS390',
- 'other': 'CpuInfoOther' } }
-
-##
-# @CpuInfoX86:
-#
-# Additional information about a virtual i386 or x86_64 CPU
-#
-# @pc: the 64-bit instruction pointer
-#
-# Since: 2.6
-##
-{ 'struct': 'CpuInfoX86', 'data': { 'pc': 'int' } }
-
-##
-# @CpuInfoSPARC:
-#
-# Additional information about a virtual SPARC CPU
-#
-# @pc: the PC component of the instruction pointer
-#
-# @npc: the NPC component of the instruction pointer
-#
-# Since: 2.6
-##
-{ 'struct': 'CpuInfoSPARC', 'data': { 'pc': 'int', 'npc': 'int' } }
-
-##
-# @CpuInfoPPC:
-#
-# Additional information about a virtual PPC CPU
-#
-# @nip: the instruction pointer
-#
-# Since: 2.6
-##
-{ 'struct': 'CpuInfoPPC', 'data': { 'nip': 'int' } }
-
-##
-# @CpuInfoMIPS:
-#
-# Additional information about a virtual MIPS CPU
-#
-# @PC: the instruction pointer
-#
-# Since: 2.6
-##
-{ 'struct': 'CpuInfoMIPS', 'data': { 'PC': 'int' } }
-
-##
-# @CpuInfoTricore:
-#
-# Additional information about a virtual Tricore CPU
-#
-# @PC: the instruction pointer
-#
-# Since: 2.6
-##
-{ 'struct': 'CpuInfoTricore', 'data': { 'PC': 'int' } }
-
-##
-# @CpuInfoOther:
-#
-# No additional information is available about the virtual CPU
-#
-# Since: 2.6
-#
-##
-{ 'struct': 'CpuInfoOther', 'data': { } }
-
-##
-# @CpuS390State:
-#
-# An enumeration of cpu states that can be assumed by a virtual
-# S390 CPU
-#
-# Since: 2.12
-##
-{ 'enum': 'CpuS390State',
- 'prefix': 'S390_CPU_STATE',
- 'data': [ 'uninitialized', 'stopped', 'check-stop', 'operating', 'load' ] }
-
-##
-# @CpuInfoS390:
-#
-# Additional information about a virtual S390 CPU
-#
-# @cpu-state: the virtual CPU's state
-#
-# Since: 2.12
-##
-{ 'struct': 'CpuInfoS390', 'data': { 'cpu-state': 'CpuS390State' } }
-
-##
-# @query-cpus:
-#
-# Returns a list of information about each virtual CPU.
-#
-# This command causes vCPU threads to exit to userspace, which causes
-# a small interruption to guest CPU execution. This will have a negative
-# impact on realtime guests and other latency sensitive guest workloads.
-# It is recommended to use @query-cpus-fast instead of this command to
-# avoid the vCPU interruption.
-#
-# Returns: a list of @CpuInfo for each virtual CPU
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "query-cpus" }
-# <- { "return": [
-# {
-# "CPU":0,
-# "current":true,
-# "halted":false,
-# "qom_path":"/machine/unattached/device[0]",
-# "arch":"x86",
-# "pc":3227107138,
-# "thread_id":3134
-# },
-# {
-# "CPU":1,
-# "current":false,
-# "halted":true,
-# "qom_path":"/machine/unattached/device[2]",
-# "arch":"x86",
-# "pc":7108165,
-# "thread_id":3135
-# }
-# ]
-# }
-#
-# Notes: This interface is deprecated (since 2.12.0), and it is strongly
-# recommended that you avoid using it. Use @query-cpus-fast to
-# obtain information about virtual CPUs.
-#
-##
-{ 'command': 'query-cpus', 'returns': ['CpuInfo'] }
-
-##
-# @CpuInfoFast:
-#
-# Information about a virtual CPU
-#
-# @cpu-index: index of the virtual CPU
-#
-# @qom-path: path to the CPU object in the QOM tree
-#
-# @thread-id: ID of the underlying host thread
-#
-# @props: properties describing to which node/socket/core/thread
-# virtual CPU belongs to, provided if supported by board
-#
-# @arch: architecture of the cpu, which determines which additional fields
-# will be listed
-#
-# Since: 2.12
-#
-##
-{ 'union': 'CpuInfoFast',
- 'base': {'cpu-index': 'int', 'qom-path': 'str',
- 'thread-id': 'int', '*props': 'CpuInstanceProperties',
- 'arch': 'CpuInfoArch' },
- 'discriminator': 'arch',
- 'data': { 'x86': 'CpuInfoOther',
- 'sparc': 'CpuInfoOther',
- 'ppc': 'CpuInfoOther',
- 'mips': 'CpuInfoOther',
- 'tricore': 'CpuInfoOther',
- 's390': 'CpuInfoS390',
- 'other': 'CpuInfoOther' } }
-
-##
-# @query-cpus-fast:
-#
-# Returns information about all virtual CPUs. This command does not
-# incur a performance penalty and should be used in production
-# instead of query-cpus.
-#
-# Returns: list of @CpuInfoFast
-#
-# Since: 2.12
-#
-# Example:
-#
-# -> { "execute": "query-cpus-fast" }
-# <- { "return": [
-# {
-# "thread-id": 25627,
-# "props": {
-# "core-id": 0,
-# "thread-id": 0,
-# "socket-id": 0
-# },
-# "qom-path": "/machine/unattached/device[0]",
-# "arch":"x86",
-# "cpu-index": 0
-# },
-# {
-# "thread-id": 25628,
-# "props": {
-# "core-id": 0,
-# "thread-id": 0,
-# "socket-id": 1
-# },
-# "qom-path": "/machine/unattached/device[2]",
-# "arch":"x86",
-# "cpu-index": 1
-# }
-# ]
-# }
-##
-{ 'command': 'query-cpus-fast', 'returns': [ 'CpuInfoFast' ] }
-
-##
-# @IOThreadInfo:
-#
-# Information about an iothread
-#
-# @id: the identifier of the iothread
-#
-# @thread-id: ID of the underlying host thread
-#
-# @poll-max-ns: maximum polling time in ns, 0 means polling is disabled
-# (since 2.9)
-#
-# @poll-grow: how many ns will be added to polling time, 0 means that it's not
-# configured (since 2.9)
-#
-# @poll-shrink: how many ns will be removed from polling time, 0 means that
-# it's not configured (since 2.9)
-#
-# Since: 2.0
-##
-{ 'struct': 'IOThreadInfo',
- 'data': {'id': 'str',
- 'thread-id': 'int',
- 'poll-max-ns': 'int',
- 'poll-grow': 'int',
- 'poll-shrink': 'int' } }
-
-##
-# @query-iothreads:
-#
-# Returns a list of information about each iothread.
-#
-# Note: this list excludes the QEMU main loop thread, which is not declared
-# using the -object iothread command-line option. It is always the main thread
-# of the process.
-#
-# Returns: a list of @IOThreadInfo for each iothread
-#
-# Since: 2.0
-#
-# Example:
-#
-# -> { "execute": "query-iothreads" }
-# <- { "return": [
-# {
-# "id":"iothread0",
-# "thread-id":3134
-# },
-# {
-# "id":"iothread1",
-# "thread-id":3135
-# }
-# ]
-# }
-#
-##
-{ 'command': 'query-iothreads', 'returns': ['IOThreadInfo'] }
-
-##
-# @BalloonInfo:
-#
-# Information about the guest balloon device.
-#
-# @actual: the number of bytes the balloon currently contains
-#
-# Since: 0.14.0
-#
-##
-{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } }
-
-##
-# @query-balloon:
-#
-# Return information about the balloon device.
-#
-# Returns: @BalloonInfo on success
-#
-# If the balloon driver is enabled but not functional because the KVM
-# kernel module cannot support it, KvmMissingCap
-#
-# If no balloon device is present, DeviceNotActive
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "query-balloon" }
-# <- { "return": {
-# "actual": 1073741824,
-# }
-# }
-#
-##
-{ 'command': 'query-balloon', 'returns': 'BalloonInfo' }
-
-##
-# @BALLOON_CHANGE:
-#
-# Emitted when the guest changes the actual BALLOON level. This value is
-# equivalent to the @actual field return by the 'query-balloon' command
-#
-# @actual: actual level of the guest memory balloon in bytes
-#
-# Note: this event is rate-limited.
-#
-# Since: 1.2
-#
-# Example:
-#
-# <- { "event": "BALLOON_CHANGE",
-# "data": { "actual": 944766976 },
-# "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
-#
-##
-{ 'event': 'BALLOON_CHANGE',
- 'data': { 'actual': 'int' } }
-
-##
-# @PciMemoryRange:
-#
-# A PCI device memory region
-#
-# @base: the starting address (guest physical)
-#
-# @limit: the ending address (guest physical)
-#
-# Since: 0.14.0
-##
-{ 'struct': 'PciMemoryRange', 'data': {'base': 'int', 'limit': 'int'} }
-
-##
-# @PciMemoryRegion:
-#
-# Information about a PCI device I/O region.
-#
-# @bar: the index of the Base Address Register for this region
-#
-# @type: 'io' if the region is a PIO region
-# 'memory' if the region is a MMIO region
-#
-# @size: memory size
-#
-# @prefetch: if @type is 'memory', true if the memory is prefetchable
-#
-# @mem_type_64: if @type is 'memory', true if the BAR is 64-bit
-#
-# Since: 0.14.0
-##
-{ 'struct': 'PciMemoryRegion',
- 'data': {'bar': 'int', 'type': 'str', 'address': 'int', 'size': 'int',
- '*prefetch': 'bool', '*mem_type_64': 'bool' } }
-
-##
-# @PciBusInfo:
-#
-# Information about a bus of a PCI Bridge device
-#
-# @number: primary bus interface number. This should be the number of the
-# bus the device resides on.
-#
-# @secondary: secondary bus interface number. This is the number of the
-# main bus for the bridge
-#
-# @subordinate: This is the highest number bus that resides below the
-# bridge.
-#
-# @io_range: The PIO range for all devices on this bridge
-#
-# @memory_range: The MMIO range for all devices on this bridge
-#
-# @prefetchable_range: The range of prefetchable MMIO for all devices on
-# this bridge
-#
-# Since: 2.4
-##
-{ 'struct': 'PciBusInfo',
- 'data': {'number': 'int', 'secondary': 'int', 'subordinate': 'int',
- 'io_range': 'PciMemoryRange',
- 'memory_range': 'PciMemoryRange',
- 'prefetchable_range': 'PciMemoryRange' } }
-
-##
-# @PciBridgeInfo:
-#
-# Information about a PCI Bridge device
-#
-# @bus: information about the bus the device resides on
-#
-# @devices: a list of @PciDeviceInfo for each device on this bridge
-#
-# Since: 0.14.0
-##
-{ 'struct': 'PciBridgeInfo',
- 'data': {'bus': 'PciBusInfo', '*devices': ['PciDeviceInfo']} }
-
-##
-# @PciDeviceClass:
-#
-# Information about the Class of a PCI device
-#
-# @desc: a string description of the device's class
-#
-# @class: the class code of the device
-#
-# Since: 2.4
-##
-{ 'struct': 'PciDeviceClass',
- 'data': {'*desc': 'str', 'class': 'int'} }
-
-##
-# @PciDeviceId:
-#
-# Information about the Id of a PCI device
-#
-# @device: the PCI device id
-#
-# @vendor: the PCI vendor id
-#
-# Since: 2.4
-##
-{ 'struct': 'PciDeviceId',
- 'data': {'device': 'int', 'vendor': 'int'} }
-
-##
-# @PciDeviceInfo:
-#
-# Information about a PCI device
-#
-# @bus: the bus number of the device
-#
-# @slot: the slot the device is located in
-#
-# @function: the function of the slot used by the device
-#
-# @class_info: the class of the device
-#
-# @id: the PCI device id
-#
-# @irq: if an IRQ is assigned to the device, the IRQ number
-#
-# @qdev_id: the device name of the PCI device
-#
-# @pci_bridge: if the device is a PCI bridge, the bridge information
-#
-# @regions: a list of the PCI I/O regions associated with the device
-#
-# Notes: the contents of @class_info.desc are not stable and should only be
-# treated as informational.
-#
-# Since: 0.14.0
-##
-{ 'struct': 'PciDeviceInfo',
- 'data': {'bus': 'int', 'slot': 'int', 'function': 'int',
- 'class_info': 'PciDeviceClass', 'id': 'PciDeviceId',
- '*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo',
- 'regions': ['PciMemoryRegion']} }
-
-##
-# @PciInfo:
-#
-# Information about a PCI bus
-#
-# @bus: the bus index
-#
-# @devices: a list of devices on this bus
-#
-# Since: 0.14.0
-##
-{ 'struct': 'PciInfo', 'data': {'bus': 'int', 'devices': ['PciDeviceInfo']} }
-
-##
-# @query-pci:
-#
-# Return information about the PCI bus topology of the guest.
-#
-# Returns: a list of @PciInfo for each PCI bus. Each bus is
-# represented by a json-object, which has a key with a json-array of
-# all PCI devices attached to it. Each device is represented by a
-# json-object.
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "query-pci" }
-# <- { "return": [
-# {
-# "bus": 0,
-# "devices": [
-# {
-# "bus": 0,
-# "qdev_id": "",
-# "slot": 0,
-# "class_info": {
-# "class": 1536,
-# "desc": "Host bridge"
-# },
-# "id": {
-# "device": 32902,
-# "vendor": 4663
-# },
-# "function": 0,
-# "regions": [
-# ]
-# },
-# {
-# "bus": 0,
-# "qdev_id": "",
-# "slot": 1,
-# "class_info": {
-# "class": 1537,
-# "desc": "ISA bridge"
-# },
-# "id": {
-# "device": 32902,
-# "vendor": 28672
-# },
-# "function": 0,
-# "regions": [
-# ]
-# },
-# {
-# "bus": 0,
-# "qdev_id": "",
-# "slot": 1,
-# "class_info": {
-# "class": 257,
-# "desc": "IDE controller"
-# },
-# "id": {
-# "device": 32902,
-# "vendor": 28688
-# },
-# "function": 1,
-# "regions": [
-# {
-# "bar": 4,
-# "size": 16,
-# "address": 49152,
-# "type": "io"
-# }
-# ]
-# },
-# {
-# "bus": 0,
-# "qdev_id": "",
-# "slot": 2,
-# "class_info": {
-# "class": 768,
-# "desc": "VGA controller"
-# },
-# "id": {
-# "device": 4115,
-# "vendor": 184
-# },
-# "function": 0,
-# "regions": [
-# {
-# "prefetch": true,
-# "mem_type_64": false,
-# "bar": 0,
-# "size": 33554432,
-# "address": 4026531840,
-# "type": "memory"
-# },
-# {
-# "prefetch": false,
-# "mem_type_64": false,
-# "bar": 1,
-# "size": 4096,
-# "address": 4060086272,
-# "type": "memory"
-# },
-# {
-# "prefetch": false,
-# "mem_type_64": false,
-# "bar": 6,
-# "size": 65536,
-# "address": -1,
-# "type": "memory"
-# }
-# ]
-# },
-# {
-# "bus": 0,
-# "qdev_id": "",
-# "irq": 11,
-# "slot": 4,
-# "class_info": {
-# "class": 1280,
-# "desc": "RAM controller"
-# },
-# "id": {
-# "device": 6900,
-# "vendor": 4098
-# },
-# "function": 0,
-# "regions": [
-# {
-# "bar": 0,
-# "size": 32,
-# "address": 49280,
-# "type": "io"
-# }
-# ]
-# }
-# ]
-# }
-# ]
-# }
-#
-# Note: This example has been shortened as the real response is too long.
-#
-##
-{ 'command': 'query-pci', 'returns': ['PciInfo'] }
-
-##
-# @quit:
-#
-# This command will cause the QEMU process to exit gracefully. While every
-# attempt is made to send the QMP response before terminating, this is not
-# guaranteed. When using this interface, a premature EOF would not be
-# unexpected.
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "quit" }
-# <- { "return": {} }
-##
-{ 'command': 'quit' }
-
-##
-# @stop:
-#
-# Stop all guest VCPU execution.
-#
-# Since: 0.14.0
-#
-# Notes: This function will succeed even if the guest is already in the
stopped
-# state. In "inmigrate" state, it will ensure that the guest
-# remains paused once migration finishes, as if the -S option was
-# passed on the command line.
-#
-# Example:
-#
-# -> { "execute": "stop" }
-# <- { "return": {} }
-#
-##
-{ 'command': 'stop' }
-
-##
-# @system_reset:
-#
-# Performs a hard reset of a guest.
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "system_reset" }
-# <- { "return": {} }
-#
-##
-{ 'command': 'system_reset' }
-
-##
-# @system_powerdown:
-#
-# Requests that a guest perform a powerdown operation.
-#
-# Since: 0.14.0
-#
-# Notes: A guest may or may not respond to this command. This command
-# returning does not indicate that a guest has accepted the request or
-# that it has shut down. Many guests will respond to this command by
-# prompting the user in some way.
-# Example:
-#
-# -> { "execute": "system_powerdown" }
-# <- { "return": {} }
-#
-##
-{ 'command': 'system_powerdown' }
-
-##
-# @cpu-add:
-#
-# Adds CPU with specified ID
-#
-# @id: ID of CPU to be created, valid values [0..max_cpus)
-#
-# Returns: Nothing on success
-#
-# Since: 1.5
-#
-# Example:
-#
-# -> { "execute": "cpu-add", "arguments": { "id": 2 } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'cpu-add', 'data': {'id': 'int'} }
-
-##
-# @memsave:
-#
-# Save a portion of guest memory to a file.
-#
-# @val: the virtual address of the guest to start from
-#
-# @size: the size of memory region to save
-#
-# @filename: the file to save the memory to as binary data
-#
-# @cpu-index: the index of the virtual CPU to use for translating the
-# virtual address (defaults to CPU 0)
-#
-# Returns: Nothing on success
-#
-# Since: 0.14.0
-#
-# Notes: Errors were not reliably returned until 1.1
-#
-# Example:
-#
-# -> { "execute": "memsave",
-# "arguments": { "val": 10,
-# "size": 100,
-# "filename": "/tmp/virtual-mem-dump" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'memsave',
- 'data': {'val': 'int', 'size': 'int', 'filename': 'str', '*cpu-index':
'int'} }
-
-##
-# @pmemsave:
-#
-# Save a portion of guest physical memory to a file.
-#
-# @val: the physical address of the guest to start from
-#
-# @size: the size of memory region to save
-#
-# @filename: the file to save the memory to as binary data
-#
-# Returns: Nothing on success
-#
-# Since: 0.14.0
-#
-# Notes: Errors were not reliably returned until 1.1
-#
-# Example:
-#
-# -> { "execute": "pmemsave",
-# "arguments": { "val": 10,
-# "size": 100,
-# "filename": "/tmp/physical-mem-dump" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'pmemsave',
- 'data': {'val': 'int', 'size': 'int', 'filename': 'str'} }
-
-##
-# @cont:
-#
-# Resume guest VCPU execution.
-#
-# Since: 0.14.0
-#
-# Returns: If successful, nothing
-#
-# Notes: This command will succeed if the guest is currently running. It
-# will also succeed if the guest is in the "inmigrate" state; in
-# this case, the effect of the command is to make sure the guest
-# starts once migration finishes, removing the effect of the -S
-# command line option if it was passed.
-#
-# Example:
-#
-# -> { "execute": "cont" }
-# <- { "return": {} }
-#
-##
-{ 'command': 'cont' }
-
-##
-# @system_wakeup:
-#
-# Wakeup guest from suspend. Does nothing in case the guest isn't suspended.
-#
-# Since: 1.1
-#
-# Returns: nothing.
-#
-# Example:
-#
-# -> { "execute": "system_wakeup" }
-# <- { "return": {} }
-#
-##
-{ 'command': 'system_wakeup' }
-
-##
-# @inject-nmi:
-#
-# Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or all CPUs
(ppc64).
-# The command fails when the guest doesn't support injecting.
-#
-# Returns: If successful, nothing
-#
-# Since: 0.14.0
-#
-# Note: prior to 2.1, this command was only supported for x86 and s390 VMs
-#
-# Example:
-#
-# -> { "execute": "inject-nmi" }
-# <- { "return": {} }
-#
-##
-{ 'command': 'inject-nmi' }
-
-##
-# @balloon:
-#
-# Request the balloon driver to change its balloon size.
-#
-# @value: the target size of the balloon in bytes
-#
-# Returns: Nothing on success
-# If the balloon driver is enabled but not functional because the KVM
-# kernel module cannot support it, KvmMissingCap
-# If no balloon device is present, DeviceNotActive
-#
-# Notes: This command just issues a request to the guest. When it returns,
-# the balloon size may not have changed. A guest can change the balloon
-# size independent of this command.
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "balloon", "arguments": { "value": 536870912 } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'balloon', 'data': {'value': 'int'} }
-
-##
-# @human-monitor-command:
-#
-# Execute a command on the human monitor and return the output.
-#
-# @command-line: the command to execute in the human monitor
-#
-# @cpu-index: The CPU to use for commands that require an implicit CPU
-#
-# Returns: the output of the command as a string
-#
-# Since: 0.14.0
-#
-# Notes: This command only exists as a stop-gap. Its use is highly
-# discouraged. The semantics of this command are not
-# guaranteed: this means that command names, arguments and
-# responses can change or be removed at ANY time. Applications
-# that rely on long term stability guarantees should NOT
-# use this command.
-#
-# Known limitations:
-#
-# * This command is stateless, this means that commands that depend
-# on state information (such as getfd) might not work
-#
-# * Commands that prompt the user for data don't currently work
-#
-# Example:
-#
-# -> { "execute": "human-monitor-command",
-# "arguments": { "command-line": "info kvm" } }
-# <- { "return": "kvm support: enabled\r\n" }
-#
-##
-{ 'command': 'human-monitor-command',
- 'data': {'command-line': 'str', '*cpu-index': 'int'},
- 'returns': 'str' }
-
-##
-# @ObjectPropertyInfo:
-#
-# @name: the name of the property
-#
-# @type: the type of the property. This will typically come in one of four
-# forms:
-#
-# 1) A primitive type such as 'u8', 'u16', 'bool', 'str', or 'double'.
-# These types are mapped to the appropriate JSON type.
-#
-# 2) A child type in the form 'child<subtype>' where subtype is a qdev
-# device type name. Child properties create the composition tree.
-#
-# 3) A link type in the form 'link<subtype>' where subtype is a qdev
-# device type name. Link properties form the device model graph.
-#
-# Since: 1.2
-##
-{ 'struct': 'ObjectPropertyInfo',
- 'data': { 'name': 'str', 'type': 'str' } }
-
-##
-# @qom-list:
-#
-# This command will list any properties of a object given a path in the object
-# model.
-#
-# @path: the path within the object model. See @qom-get for a description of
-# this parameter.
-#
-# Returns: a list of @ObjectPropertyInfo that describe the properties of the
-# object.
-#
-# Since: 1.2
-##
-{ 'command': 'qom-list',
- 'data': { 'path': 'str' },
- 'returns': [ 'ObjectPropertyInfo' ] }
-
-##
-# @qom-get:
-#
-# This command will get a property from a object model path and return the
-# value.
-#
-# @path: The path within the object model. There are two forms of supported
-# paths--absolute and partial paths.
-#
-# Absolute paths are derived from the root object and can follow child<>
-# or link<> properties. Since they can follow link<> properties, they
-# can be arbitrarily long. Absolute paths look like absolute filenames
-# and are prefixed with a leading slash.
-#
-# Partial paths look like relative filenames. They do not begin
-# with a prefix. The matching rules for partial paths are subtle but
-# designed to make specifying objects easy. At each level of the
-# composition tree, the partial path is matched as an absolute path.
-# The first match is not returned. At least two matches are searched
-# for. A successful result is only returned if only one match is
-# found. If more than one match is found, a flag is return to
-# indicate that the match was ambiguous.
-#
-# @property: The property name to read
-#
-# Returns: The property value. The type depends on the property
-# type. child<> and link<> properties are returned as #str
-# pathnames. All integer property types (u8, u16, etc) are
-# returned as #int.
-#
-# Since: 1.2
-##
-{ 'command': 'qom-get',
- 'data': { 'path': 'str', 'property': 'str' },
- 'returns': 'any' }
-
-##
-# @qom-set:
-#
-# This command will set a property from a object model path.
-#
-# @path: see @qom-get for a description of this parameter
-#
-# @property: the property name to set
-#
-# @value: a value who's type is appropriate for the property type. See
@qom-get
-# for a description of type mapping.
-#
-# Since: 1.2
-##
-{ 'command': 'qom-set',
- 'data': { 'path': 'str', 'property': 'str', 'value': 'any' } }
-
-##
-# @change:
-#
-# This command is multiple commands multiplexed together.
-#
-# @device: This is normally the name of a block device but it may also be
'vnc'.
-# when it's 'vnc', then sub command depends on @target
-#
-# @target: If @device is a block device, then this is the new filename.
-# If @device is 'vnc', then if the value 'password' selects the vnc
-# change password command. Otherwise, this specifies a new server
URI
-# address to listen to for VNC connections.
-#
-# @arg: If @device is a block device, then this is an optional format to
open
-# the device with.
-# If @device is 'vnc' and @target is 'password', this is the new VNC
-# password to set. See change-vnc-password for additional notes.
-#
-# Returns: Nothing on success.
-# If @device is not a valid block device, DeviceNotFound
-#
-# Notes: This interface is deprecated, and it is strongly recommended that you
-# avoid using it. For changing block devices, use
-# blockdev-change-medium; for changing VNC parameters, use
-# change-vnc-password.
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# 1. Change a removable medium
-#
-# -> { "execute": "change",
-# "arguments": { "device": "ide1-cd0",
-# "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } }
-# <- { "return": {} }
-#
-# 2. Change VNC password
-#
-# -> { "execute": "change",
-# "arguments": { "device": "vnc", "target": "password",
-# "arg": "foobar1" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'change',
- 'data': {'device': 'str', 'target': 'str', '*arg': 'str'} }
-
-##
-# @ObjectTypeInfo:
-#
-# This structure describes a search result from @qom-list-types
-#
-# @name: the type name found in the search
-#
-# @abstract: the type is abstract and can't be directly instantiated.
-# Omitted if false. (since 2.10)
-#
-# @parent: Name of parent type, if any (since 2.10)
-#
-# Since: 1.1
-##
-{ 'struct': 'ObjectTypeInfo',
- 'data': { 'name': 'str', '*abstract': 'bool', '*parent': 'str' } }
-
-##
-# @qom-list-types:
-#
-# This command will return a list of types given search parameters
-#
-# @implements: if specified, only return types that implement this type name
-#
-# @abstract: if true, include abstract types in the results
-#
-# Returns: a list of @ObjectTypeInfo or an empty list if no results are found
-#
-# Since: 1.1
-##
-{ 'command': 'qom-list-types',
- 'data': { '*implements': 'str', '*abstract': 'bool' },
- 'returns': [ 'ObjectTypeInfo' ] }
-
-##
-# @DevicePropertyInfo:
-#
-# Information about device properties.
-#
-# @name: the name of the property
-# @type: the typename of the property
-# @description: if specified, the description of the property.
-# (since 2.2)
-#
-# Since: 1.2
-##
-{ 'struct': 'DevicePropertyInfo',
- 'data': { 'name': 'str', 'type': 'str', '*description': 'str' } }
-
-##
-# @device-list-properties:
-#
-# List properties associated with a device.
-#
-# @typename: the type name of a device
-#
-# Returns: a list of DevicePropertyInfo describing a devices properties
-#
-# Since: 1.2
-##
-{ 'command': 'device-list-properties',
- 'data': { 'typename': 'str'},
- 'returns': [ 'DevicePropertyInfo' ] }
-
-##
-# @xen-set-global-dirty-log:
-#
-# Enable or disable the global dirty log mode.
-#
-# @enable: true to enable, false to disable.
-#
-# Returns: nothing
-#
-# Since: 1.3
-#
-# Example:
-#
-# -> { "execute": "xen-set-global-dirty-log",
-# "arguments": { "enable": true } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } }
-
-##
-# @device_add:
-#
-# @driver: the name of the new device's driver
-#
-# @bus: the device's parent bus (device tree path)
-#
-# @id: the device's ID, must be unique
-#
-# Additional arguments depend on the type.
-#
-# Add a device.
-#
-# Notes:
-# 1. For detailed information about this command, please refer to the
-# 'docs/qdev-device-use.txt' file.
-#
-# 2. It's possible to list device properties by running QEMU with the
-# "-device DEVICE,help" command-line argument, where DEVICE is the
-# device's name
-#
-# Example:
-#
-# -> { "execute": "device_add",
-# "arguments": { "driver": "e1000", "id": "net1",
-# "bus": "pci.0",
-# "mac": "52:54:00:12:34:56" } }
-# <- { "return": {} }
-#
-# TODO: This command effectively bypasses QAPI completely due to its
-# "additional arguments" business. It shouldn't have been added to
-# the schema in this form. It should be qapified properly, or
-# replaced by a properly qapified command.
-#
-# Since: 0.13
-##
-{ 'command': 'device_add',
- 'data': {'driver': 'str', '*bus': 'str', '*id': 'str'},
- 'gen': false } # so we can get the additional arguments
-
-##
-# @device_del:
-#
-# Remove a device from a guest
-#
-# @id: the device's ID or QOM path
-#
-# Returns: Nothing on success
-# If @id is not a valid device, DeviceNotFound
-#
-# Notes: When this command completes, the device may not be removed from the
-# guest. Hot removal is an operation that requires guest cooperation.
-# This command merely requests that the guest begin the hot removal
-# process. Completion of the device removal process is signaled with a
-# DEVICE_DELETED event. Guest reset will automatically complete removal
-# for all devices.
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "device_del",
-# "arguments": { "id": "net1" } }
-# <- { "return": {} }
-#
-# -> { "execute": "device_del",
-# "arguments": { "id": "/machine/peripheral-anon/device[0]" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'device_del', 'data': {'id': 'str'} }
-
-##
-# @DEVICE_DELETED:
-#
-# Emitted whenever the device removal completion is acknowledged by the guest.
-# At this point, it's safe to reuse the specified device ID. Device removal can
-# be initiated by the guest or by HMP/QMP commands.
-#
-# @device: device name
-#
-# @path: device path
-#
-# Since: 1.5
-#
-# Example:
-#
-# <- { "event": "DEVICE_DELETED",
-# "data": { "device": "virtio-net-pci-0",
-# "path": "/machine/peripheral/virtio-net-pci-0" },
-# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-#
-##
-{ 'event': 'DEVICE_DELETED',
- 'data': { '*device': 'str', 'path': 'str' } }
-
-##
-# @DumpGuestMemoryFormat:
-#
-# An enumeration of guest-memory-dump's format.
-#
-# @elf: elf format
-#
-# @kdump-zlib: kdump-compressed format with zlib-compressed
-#
-# @kdump-lzo: kdump-compressed format with lzo-compressed
-#
-# @kdump-snappy: kdump-compressed format with snappy-compressed
-#
-# Since: 2.0
-##
-{ 'enum': 'DumpGuestMemoryFormat',
- 'data': [ 'elf', 'kdump-zlib', 'kdump-lzo', 'kdump-snappy' ] }
-
-##
-# @dump-guest-memory:
-#
-# Dump guest's memory to vmcore. It is a synchronous operation that can take
-# very long depending on the amount of guest memory.
-#
-# @paging: if true, do paging to get guest's memory mapping. This allows
-# using gdb to process the core file.
-#
-# IMPORTANT: this option can make QEMU allocate several gigabytes
-# of RAM. This can happen for a large guest, or a
-# malicious guest pretending to be large.
-#
-# Also, paging=true has the following limitations:
-#
-# 1. The guest may be in a catastrophic state or can have corrupted
-# memory, which cannot be trusted
-# 2. The guest can be in real-mode even if paging is enabled. For
-# example, the guest uses ACPI to sleep, and ACPI sleep state
-# goes in real-mode
-# 3. Currently only supported on i386 and x86_64.
-#
-# @protocol: the filename or file descriptor of the vmcore. The supported
-# protocols are:
-#
-# 1. file: the protocol starts with "file:", and the following
-# string is the file's path.
-# 2. fd: the protocol starts with "fd:", and the following string
-# is the fd's name.
-#
-# @detach: if true, QMP will return immediately rather than
-# waiting for the dump to finish. The user can track progress
-# using "query-dump". (since 2.6).
-#
-# @begin: if specified, the starting physical address.
-#
-# @length: if specified, the memory size, in bytes. If you don't
-# want to dump all guest's memory, please specify the start @begin
-# and @length
-#
-# @format: if specified, the format of guest memory dump. But non-elf
-# format is conflict with paging and filter, ie. @paging, @begin and
-# @length is not allowed to be specified with non-elf @format at the
-# same time (since 2.0)
-#
-# Note: All boolean arguments default to false
-#
-# Returns: nothing on success
-#
-# Since: 1.2
-#
-# Example:
-#
-# -> { "execute": "dump-guest-memory",
-# "arguments": { "protocol": "fd:dump" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'dump-guest-memory',
- 'data': { 'paging': 'bool', 'protocol': 'str', '*detach': 'bool',
- '*begin': 'int', '*length': 'int',
- '*format': 'DumpGuestMemoryFormat'} }
-
-##
-# @DumpStatus:
-#
-# Describe the status of a long-running background guest memory dump.
-#
-# @none: no dump-guest-memory has started yet.
-#
-# @active: there is one dump running in background.
-#
-# @completed: the last dump has finished successfully.
-#
-# @failed: the last dump has failed.
-#
-# Since: 2.6
-##
-{ 'enum': 'DumpStatus',
- 'data': [ 'none', 'active', 'completed', 'failed' ] }
-
-##
-# @DumpQueryResult:
-#
-# The result format for 'query-dump'.
-#
-# @status: enum of @DumpStatus, which shows current dump status
-#
-# @completed: bytes written in latest dump (uncompressed)
-#
-# @total: total bytes to be written in latest dump (uncompressed)
-#
-# Since: 2.6
-##
-{ 'struct': 'DumpQueryResult',
- 'data': { 'status': 'DumpStatus',
- 'completed': 'int',
- 'total': 'int' } }
-
-##
-# @query-dump:
-#
-# Query latest dump status.
-#
-# Returns: A @DumpStatus object showing the dump status.
-#
-# Since: 2.6
-#
-# Example:
-#
-# -> { "execute": "query-dump" }
-# <- { "return": { "status": "active", "completed": 1024000,
-# "total": 2048000 } }
-#
-##
-{ 'command': 'query-dump', 'returns': 'DumpQueryResult' }
-
-##
-# @DUMP_COMPLETED:
-#
-# Emitted when background dump has completed
-#
-# @result: DumpQueryResult type described in qapi-schema.json.
-#
-# @error: human-readable error string that provides
-# hint on why dump failed. Only presents on failure. The
-# user should not try to interpret the error string.
-#
-# Since: 2.6
-#
-# Example:
-#
-# { "event": "DUMP_COMPLETED",
-# "data": {"result": {"total": 1090650112, "status": "completed",
-# "completed": 1090650112} } }
-#
-##
-{ 'event': 'DUMP_COMPLETED' ,
- 'data': { 'result': 'DumpQueryResult', '*error': 'str' } }
-
-##
-# @DumpGuestMemoryCapability:
-#
-# A list of the available formats for dump-guest-memory
-#
-# Since: 2.0
-##
-{ 'struct': 'DumpGuestMemoryCapability',
- 'data': {
- 'formats': ['DumpGuestMemoryFormat'] } }
-
-##
-# @query-dump-guest-memory-capability:
-#
-# Returns the available formats for dump-guest-memory
-#
-# Returns: A @DumpGuestMemoryCapability object listing available formats for
-# dump-guest-memory
-#
-# Since: 2.0
-#
-# Example:
-#
-# -> { "execute": "query-dump-guest-memory-capability" }
-# <- { "return": { "formats":
-# ["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
-#
-##
-{ 'command': 'query-dump-guest-memory-capability',
- 'returns': 'DumpGuestMemoryCapability' }
-
-##
-# @dump-skeys:
-#
-# Dump guest's storage keys
-#
-# @filename: the path to the file to dump to
-#
-# This command is only supported on s390 architecture.
-#
-# Since: 2.5
-#
-# Example:
-#
-# -> { "execute": "dump-skeys",
-# "arguments": { "filename": "/tmp/skeys" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'dump-skeys',
- 'data': { 'filename': 'str' } }
-
-##
-# @object-add:
-#
-# Create a QOM object.
-#
-# @qom-type: the class name for the object to be created
-#
-# @id: the name of the new object
-#
-# @props: a dictionary of properties to be passed to the backend
-#
-# Returns: Nothing on success
-# Error if @qom-type is not a valid class name
-#
-# Since: 2.0
-#
-# Example:
-#
-# -> { "execute": "object-add",
-# "arguments": { "qom-type": "rng-random", "id": "rng1",
-# "props": { "filename": "/dev/hwrng" } } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'object-add',
- 'data': {'qom-type': 'str', 'id': 'str', '*props': 'any'} }
-
-##
-# @object-del:
-#
-# Remove a QOM object.
-#
-# @id: the name of the QOM object to remove
-#
-# Returns: Nothing on success
-# Error if @id is not a valid id for a QOM object
-#
-# Since: 2.0
-#
-# Example:
-#
-# -> { "execute": "object-del", "arguments": { "id": "rng1" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'object-del', 'data': {'id': 'str'} }
-
-##
-# @getfd:
-#
-# Receive a file descriptor via SCM rights and assign it a name
-#
-# @fdname: file descriptor name
-#
-# Returns: Nothing on success
-#
-# Since: 0.14.0
-#
-# Notes: If @fdname already exists, the file descriptor assigned to
-# it will be closed and replaced by the received file
-# descriptor.
-#
-# The 'closefd' command can be used to explicitly close the
-# file descriptor when it is no longer needed.
-#
-# Example:
-#
-# -> { "execute": "getfd", "arguments": { "fdname": "fd1" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'getfd', 'data': {'fdname': 'str'} }
-
-##
-# @closefd:
-#
-# Close a file descriptor previously passed via SCM rights
-#
-# @fdname: file descriptor name
-#
-# Returns: Nothing on success
-#
-# Since: 0.14.0
-#
-# Example:
-#
-# -> { "execute": "closefd", "arguments": { "fdname": "fd1" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'closefd', 'data': {'fdname': 'str'} }
-
-##
-# @MachineInfo:
-#
-# Information describing a machine.
-#
-# @name: the name of the machine
-#
-# @alias: an alias for the machine name
-#
-# @is-default: whether the machine is default
-#
-# @cpu-max: maximum number of CPUs supported by the machine type
-# (since 1.5.0)
-#
-# @hotpluggable-cpus: cpu hotplug via -device is supported (since 2.7.0)
-#
-# Since: 1.2.0
-##
-{ 'struct': 'MachineInfo',
- 'data': { 'name': 'str', '*alias': 'str',
- '*is-default': 'bool', 'cpu-max': 'int',
- 'hotpluggable-cpus': 'bool'} }
-
-##
-# @query-machines:
-#
-# Return a list of supported machines
-#
-# Returns: a list of MachineInfo
-#
-# Since: 1.2.0
-##
-{ 'command': 'query-machines', 'returns': ['MachineInfo'] }
-
-##
-# @CpuDefinitionInfo:
-#
-# Virtual CPU definition.
-#
-# @name: the name of the CPU definition
-#
-# @migration-safe: whether a CPU definition can be safely used for
-# migration in combination with a QEMU compatibility machine
-# when migrating between different QMU versions and between
-# hosts with different sets of (hardware or software)
-# capabilities. If not provided, information is not available
-# and callers should not assume the CPU definition to be
-# migration-safe. (since 2.8)
-#
-# @static: whether a CPU definition is static and will not change depending on
-# QEMU version, machine type, machine options and accelerator options.
-# A static model is always migration-safe. (since 2.8)
-#
-# @unavailable-features: List of properties that prevent
-# the CPU model from running in the current
-# host. (since 2.8)
-# @typename: Type name that can be used as argument to @device-list-properties,
-# to introspect properties configurable using -cpu or -global.
-# (since 2.9)
-#
-# @unavailable-features is a list of QOM property names that
-# represent CPU model attributes that prevent the CPU from running.
-# If the QOM property is read-only, that means there's no known
-# way to make the CPU model run in the current host. Implementations
-# that choose not to provide specific information return the
-# property name "type".
-# If the property is read-write, it means that it MAY be possible
-# to run the CPU model in the current host if that property is
-# changed. Management software can use it as hints to suggest or
-# choose an alternative for the user, or just to generate meaningful
-# error messages explaining why the CPU model can't be used.
-# If @unavailable-features is an empty list, the CPU model is
-# runnable using the current host and machine-type.
-# If @unavailable-features is not present, runnability
-# information for the CPU is not available.
-#
-# Since: 1.2.0
-##
-{ 'struct': 'CpuDefinitionInfo',
- 'data': { 'name': 'str', '*migration-safe': 'bool', 'static': 'bool',
- '*unavailable-features': [ 'str' ], 'typename': 'str' } }
-
-##
-# @MemoryInfo:
-#
-# Actual memory information in bytes.
-#
-# @base-memory: size of "base" memory specified with command line
-# option -m.
-#
-# @plugged-memory: size of memory that can be hot-unplugged. This field
-# is omitted if target doesn't support memory hotplug
-# (i.e. CONFIG_MEM_HOTPLUG not defined on build time).
-#
-# Since: 2.11.0
-##
-{ 'struct': 'MemoryInfo',
- 'data' : { 'base-memory': 'size', '*plugged-memory': 'size' } }
-
-##
-# @query-memory-size-summary:
-#
-# Return the amount of initially allocated and present hotpluggable (if
-# enabled) memory in bytes.
-#
-# Example:
-#
-# -> { "execute": "query-memory-size-summary" }
-# <- { "return": { "base-memory": 4294967296, "plugged-memory": 0 } }
-#
-# Since: 2.11.0
-##
-{ 'command': 'query-memory-size-summary', 'returns': 'MemoryInfo' }
-
-##
-# @query-cpu-definitions:
-#
-# Return a list of supported virtual CPU definitions
-#
-# Returns: a list of CpuDefInfo
-#
-# Since: 1.2.0
-##
-{ 'command': 'query-cpu-definitions', 'returns': ['CpuDefinitionInfo'] }
-
-##
-# @CpuModelInfo:
-#
-# Virtual CPU model.
-#
-# A CPU model consists of the name of a CPU definition, to which
-# delta changes are applied (e.g. features added/removed). Most magic values
-# that an architecture might require should be hidden behind the name.
-# However, if required, architectures can expose relevant properties.
-#
-# @name: the name of the CPU definition the model is based on
-# @props: a dictionary of QOM properties to be applied
-#
-# Since: 2.8.0
-##
-{ 'struct': 'CpuModelInfo',
- 'data': { 'name': 'str',
- '*props': 'any' } }
-
-##
-# @CpuModelExpansionType:
-#
-# An enumeration of CPU model expansion types.
-#
-# @static: Expand to a static CPU model, a combination of a static base
-# model name and property delta changes. As the static base model will
-# never change, the expanded CPU model will be the same, independent
of
-# independent of QEMU version, machine type, machine options, and
-# accelerator options. Therefore, the resulting model can be used by
-# tooling without having to specify a compatibility machine - e.g.
when
-# displaying the "host" model. static CPU models are migration-safe.
-#
-# @full: Expand all properties. The produced model is not guaranteed to be
-# migration-safe, but allows tooling to get an insight and work with
-# model details.
-#
-# Note: When a non-migration-safe CPU model is expanded in static mode, some
-# features enabled by the CPU model may be omitted, because they can't be
-# implemented by a static CPU model definition (e.g. cache info passthrough and
-# PMU passthrough in x86). If you need an accurate representation of the
-# features enabled by a non-migration-safe CPU model, use @full. If you need a
-# static representation that will keep ABI compatibility even when changing
QEMU
-# version or machine-type, use @static (but keep in mind that some features may
-# be omitted).
-#
-# Since: 2.8.0
-##
-{ 'enum': 'CpuModelExpansionType',
- 'data': [ 'static', 'full' ] }
-
-
-##
-# @CpuModelExpansionInfo:
-#
-# The result of a cpu model expansion.
-#
-# @model: the expanded CpuModelInfo.
-#
-# Since: 2.8.0
-##
-{ 'struct': 'CpuModelExpansionInfo',
- 'data': { 'model': 'CpuModelInfo' } }
-
-
-##
-# @query-cpu-model-expansion:
-#
-# Expands a given CPU model (or a combination of CPU model + additional
options)
-# to different granularities, allowing tooling to get an understanding what a
-# specific CPU model looks like in QEMU under a certain configuration.
-#
-# This interface can be used to query the "host" CPU model.
-#
-# The data returned by this command may be affected by:
-#
-# * QEMU version: CPU models may look different depending on the QEMU version.
-# (Except for CPU models reported as "static" in query-cpu-definitions.)
-# * machine-type: CPU model may look different depending on the machine-type.
-# (Except for CPU models reported as "static" in query-cpu-definitions.)
-# * machine options (including accelerator): in some architectures, CPU models
-# may look different depending on machine and accelerator options. (Except
for
-# CPU models reported as "static" in query-cpu-definitions.)
-# * "-cpu" arguments and global properties: arguments to the -cpu option and
-# global properties may affect expansion of CPU models. Using
-# query-cpu-model-expansion while using these is not advised.
-#
-# Some architectures may not support all expansion types. s390x supports
-# "full" and "static".
-#
-# Returns: a CpuModelExpansionInfo. Returns an error if expanding CPU models is
-# not supported, if the model cannot be expanded, if the model
contains
-# an unknown CPU definition name, unknown properties or properties
-# with a wrong type. Also returns an error if an expansion type is
-# not supported.
-#
-# Since: 2.8.0
-##
-{ 'command': 'query-cpu-model-expansion',
- 'data': { 'type': 'CpuModelExpansionType',
- 'model': 'CpuModelInfo' },
- 'returns': 'CpuModelExpansionInfo' }
-
-##
-# @CpuModelCompareResult:
-#
-# An enumeration of CPU model comparison results. The result is usually
-# calculated using e.g. CPU features or CPU generations.
-#
-# @incompatible: If model A is incompatible to model B, model A is not
-# guaranteed to run where model B runs and the other way around.
-#
-# @identical: If model A is identical to model B, model A is guaranteed to run
-# where model B runs and the other way around.
-#
-# @superset: If model A is a superset of model B, model B is guaranteed to run
-# where model A runs. There are no guarantees about the other way.
-#
-# @subset: If model A is a subset of model B, model A is guaranteed to run
-# where model B runs. There are no guarantees about the other way.
-#
-# Since: 2.8.0
-##
-{ 'enum': 'CpuModelCompareResult',
- 'data': [ 'incompatible', 'identical', 'superset', 'subset' ] }
-
-##
-# @CpuModelCompareInfo:
-#
-# The result of a CPU model comparison.
-#
-# @result: The result of the compare operation.
-# @responsible-properties: List of properties that led to the comparison result
-# not being identical.
-#
-# @responsible-properties is a list of QOM property names that led to
-# both CPUs not being detected as identical. For identical models, this
-# list is empty.
-# If a QOM property is read-only, that means there's no known way to make the
-# CPU models identical. If the special property name "type" is included, the
-# models are by definition not identical and cannot be made identical.
-#
-# Since: 2.8.0
-##
-{ 'struct': 'CpuModelCompareInfo',
- 'data': {'result': 'CpuModelCompareResult',
- 'responsible-properties': ['str']
- }
-}
-
-##
-# @query-cpu-model-comparison:
-#
-# Compares two CPU models, returning how they compare in a specific
-# configuration. The results indicates how both models compare regarding
-# runnability. This result can be used by tooling to make decisions if a
-# certain CPU model will run in a certain configuration or if a compatible
-# CPU model has to be created by baselining.
-#
-# Usually, a CPU model is compared against the maximum possible CPU model
-# of a certain configuration (e.g. the "host" model for KVM). If that CPU
-# model is identical or a subset, it will run in that configuration.
-#
-# The result returned by this command may be affected by:
-#
-# * QEMU version: CPU models may look different depending on the QEMU version.
-# (Except for CPU models reported as "static" in query-cpu-definitions.)
-# * machine-type: CPU model may look different depending on the machine-type.
-# (Except for CPU models reported as "static" in query-cpu-definitions.)
-# * machine options (including accelerator): in some architectures, CPU models
-# may look different depending on machine and accelerator options. (Except
for
-# CPU models reported as "static" in query-cpu-definitions.)
-# * "-cpu" arguments and global properties: arguments to the -cpu option and
-# global properties may affect expansion of CPU models. Using
-# query-cpu-model-expansion while using these is not advised.
-#
-# Some architectures may not support comparing CPU models. s390x supports
-# comparing CPU models.
-#
-# Returns: a CpuModelBaselineInfo. Returns an error if comparing CPU models is
-# not supported, if a model cannot be used, if a model contains
-# an unknown cpu definition name, unknown properties or properties
-# with wrong types.
-#
-# Since: 2.8.0
-##
-{ 'command': 'query-cpu-model-comparison',
- 'data': { 'modela': 'CpuModelInfo', 'modelb': 'CpuModelInfo' },
- 'returns': 'CpuModelCompareInfo' }
-
-##
-# @CpuModelBaselineInfo:
-#
-# The result of a CPU model baseline.
-#
-# @model: the baselined CpuModelInfo.
-#
-# Since: 2.8.0
-##
-{ 'struct': 'CpuModelBaselineInfo',
- 'data': { 'model': 'CpuModelInfo' } }
-
-##
-# @query-cpu-model-baseline:
-#
-# Baseline two CPU models, creating a compatible third model. The created
-# model will always be a static, migration-safe CPU model (see "static"
-# CPU model expansion for details).
-#
-# This interface can be used by tooling to create a compatible CPU model out
-# two CPU models. The created CPU model will be identical to or a subset of
-# both CPU models when comparing them. Therefore, the created CPU model is
-# guaranteed to run where the given CPU models run.
-#
-# The result returned by this command may be affected by:
-#
-# * QEMU version: CPU models may look different depending on the QEMU version.
-# (Except for CPU models reported as "static" in query-cpu-definitions.)
-# * machine-type: CPU model may look different depending on the machine-type.
-# (Except for CPU models reported as "static" in query-cpu-definitions.)
-# * machine options (including accelerator): in some architectures, CPU models
-# may look different depending on machine and accelerator options. (Except
for
-# CPU models reported as "static" in query-cpu-definitions.)
-# * "-cpu" arguments and global properties: arguments to the -cpu option and
-# global properties may affect expansion of CPU models. Using
-# query-cpu-model-expansion while using these is not advised.
-#
-# Some architectures may not support baselining CPU models. s390x supports
-# baselining CPU models.
-#
-# Returns: a CpuModelBaselineInfo. Returns an error if baselining CPU models is
-# not supported, if a model cannot be used, if a model contains
-# an unknown cpu definition name, unknown properties or properties
-# with wrong types.
-#
-# Since: 2.8.0
-##
-{ 'command': 'query-cpu-model-baseline',
- 'data': { 'modela': 'CpuModelInfo',
- 'modelb': 'CpuModelInfo' },
- 'returns': 'CpuModelBaselineInfo' }
-
-##
-# @AddfdInfo:
-#
-# Information about a file descriptor that was added to an fd set.
-#
-# @fdset-id: The ID of the fd set that @fd was added to.
-#
-# @fd: The file descriptor that was received via SCM rights and
-# added to the fd set.
-#
-# Since: 1.2.0
-##
-{ 'struct': 'AddfdInfo', 'data': {'fdset-id': 'int', 'fd': 'int'} }
-
-##
-# @add-fd:
-#
-# Add a file descriptor, that was passed via SCM rights, to an fd set.
-#
-# @fdset-id: The ID of the fd set to add the file descriptor to.
-#
-# @opaque: A free-form string that can be used to describe the fd.
-#
-# Returns: @AddfdInfo on success
-#
-# If file descriptor was not received, FdNotSupplied
-#
-# If @fdset-id is a negative value, InvalidParameterValue
-#
-# Notes: The list of fd sets is shared by all monitor connections.
-#
-# If @fdset-id is not specified, a new fd set will be created.
-#
-# Since: 1.2.0
-#
-# Example:
-#
-# -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } }
-# <- { "return": { "fdset-id": 1, "fd": 3 } }
-#
-##
-{ 'command': 'add-fd', 'data': {'*fdset-id': 'int', '*opaque': 'str'},
- 'returns': 'AddfdInfo' }
-
-##
-# @remove-fd:
-#
-# Remove a file descriptor from an fd set.
-#
-# @fdset-id: The ID of the fd set that the file descriptor belongs to.
-#
-# @fd: The file descriptor that is to be removed.
-#
-# Returns: Nothing on success
-# If @fdset-id or @fd is not found, FdNotFound
-#
-# Since: 1.2.0
-#
-# Notes: The list of fd sets is shared by all monitor connections.
-#
-# If @fd is not specified, all file descriptors in @fdset-id
-# will be removed.
-#
-# Example:
-#
-# -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'remove-fd', 'data': {'fdset-id': 'int', '*fd': 'int'} }
-
-##
-# @FdsetFdInfo:
-#
-# Information about a file descriptor that belongs to an fd set.
-#
-# @fd: The file descriptor value.
-#
-# @opaque: A free-form string that can be used to describe the fd.
-#
-# Since: 1.2.0
-##
-{ 'struct': 'FdsetFdInfo',
- 'data': {'fd': 'int', '*opaque': 'str'} }
-
-##
-# @FdsetInfo:
-#
-# Information about an fd set.
-#
-# @fdset-id: The ID of the fd set.
-#
-# @fds: A list of file descriptors that belong to this fd set.
-#
-# Since: 1.2.0
-##
-{ 'struct': 'FdsetInfo',
- 'data': {'fdset-id': 'int', 'fds': ['FdsetFdInfo']} }
-
-##
-# @query-fdsets:
-#
-# Return information describing all fd sets.
-#
-# Returns: A list of @FdsetInfo
-#
-# Since: 1.2.0
-#
-# Note: The list of fd sets is shared by all monitor connections.
-#
-# Example:
-#
-# -> { "execute": "query-fdsets" }
-# <- { "return": [
-# {
-# "fds": [
-# {
-# "fd": 30,
-# "opaque": "rdonly:/path/to/file"
-# },
-# {
-# "fd": 24,
-# "opaque": "rdwr:/path/to/file"
-# }
-# ],
-# "fdset-id": 1
-# },
-# {
-# "fds": [
-# {
-# "fd": 28
-# },
-# {
-# "fd": 29
-# }
-# ],
-# "fdset-id": 0
-# }
-# ]
-# }
-#
-##
-{ 'command': 'query-fdsets', 'returns': ['FdsetInfo'] }
-
-##
-# @TargetInfo:
-#
-# Information describing the QEMU target.
-#
-# @arch: the target architecture (eg "x86_64", "i386", etc)
-#
-# Since: 1.2.0
-##
-{ 'struct': 'TargetInfo',
- 'data': { 'arch': 'str' } }
-
-##
-# @query-target:
-#
-# Return information about the target for this QEMU
-#
-# Returns: TargetInfo
-#
-# Since: 1.2.0
-##
-{ 'command': 'query-target', 'returns': 'TargetInfo' }
-
-##
-# @AcpiTableOptions:
-#
-# Specify an ACPI table on the command line to load.
-#
-# At most one of @file and @data can be specified. The list of files specified
-# by any one of them is loaded and concatenated in order. If both are omitted,
-# @data is implied.
-#
-# Other fields / optargs can be used to override fields of the generic ACPI
-# table header; refer to the ACPI specification 5.0, section 5.2.6 System
-# Description Table Header. If a header field is not overridden, then the
-# corresponding value from the concatenated blob is used (in case of @file), or
-# it is filled in with a hard-coded value (in case of @data).
-#
-# String fields are copied into the matching ACPI member from lowest address
-# upwards, and silently truncated / NUL-padded to length.
-#
-# @sig: table signature / identifier (4 bytes)
-#
-# @rev: table revision number (dependent on signature, 1 byte)
-#
-# @oem_id: OEM identifier (6 bytes)
-#
-# @oem_table_id: OEM table identifier (8 bytes)
-#
-# @oem_rev: OEM-supplied revision number (4 bytes)
-#
-# @asl_compiler_id: identifier of the utility that created the table
-# (4 bytes)
-#
-# @asl_compiler_rev: revision number of the utility that created the
-# table (4 bytes)
-#
-# @file: colon (:) separated list of pathnames to load and
-# concatenate as table data. The resultant binary blob is expected to
-# have an ACPI table header. At least one file is required. This field
-# excludes @data.
-#
-# @data: colon (:) separated list of pathnames to load and
-# concatenate as table data. The resultant binary blob must not have an
-# ACPI table header. At least one file is required. This field excludes
-# @file.
-#
-# Since: 1.5
-##
-{ 'struct': 'AcpiTableOptions',
- 'data': {
- '*sig': 'str',
- '*rev': 'uint8',
- '*oem_id': 'str',
- '*oem_table_id': 'str',
- '*oem_rev': 'uint32',
- '*asl_compiler_id': 'str',
- '*asl_compiler_rev': 'uint32',
- '*file': 'str',
- '*data': 'str' }}
-
-##
-# @CommandLineParameterType:
-#
-# Possible types for an option parameter.
-#
-# @string: accepts a character string
-#
-# @boolean: accepts "on" or "off"
-#
-# @number: accepts a number
-#
-# @size: accepts a number followed by an optional suffix (K)ilo,
-# (M)ega, (G)iga, (T)era
-#
-# Since: 1.5
-##
-{ 'enum': 'CommandLineParameterType',
- 'data': ['string', 'boolean', 'number', 'size'] }
-
-##
-# @CommandLineParameterInfo:
-#
-# Details about a single parameter of a command line option.
-#
-# @name: parameter name
-#
-# @type: parameter @CommandLineParameterType
-#
-# @help: human readable text string, not suitable for parsing.
-#
-# @default: default value string (since 2.1)
-#
-# Since: 1.5
-##
-{ 'struct': 'CommandLineParameterInfo',
- 'data': { 'name': 'str',
- 'type': 'CommandLineParameterType',
- '*help': 'str',
- '*default': 'str' } }
-
-##
-# @CommandLineOptionInfo:
-#
-# Details about a command line option, including its list of parameter details
-#
-# @option: option name
-#
-# @parameters: an array of @CommandLineParameterInfo
-#
-# Since: 1.5
-##
-{ 'struct': 'CommandLineOptionInfo',
- 'data': { 'option': 'str', 'parameters': ['CommandLineParameterInfo'] } }
-
-##
-# @query-command-line-options:
-#
-# Query command line option schema.
-#
-# @option: option name
-#
-# Returns: list of @CommandLineOptionInfo for all options (or for the given
-# @option). Returns an error if the given @option doesn't exist.
-#
-# Since: 1.5
-#
-# Example:
-#
-# -> { "execute": "query-command-line-options",
-# "arguments": { "option": "option-rom" } }
-# <- { "return": [
-# {
-# "parameters": [
-# {
-# "name": "romfile",
-# "type": "string"
-# },
-# {
-# "name": "bootindex",
-# "type": "number"
-# }
-# ],
-# "option": "option-rom"
-# }
-# ]
-# }
-#
-##
-{'command': 'query-command-line-options', 'data': { '*option': 'str' },
- 'returns': ['CommandLineOptionInfo'] }
-
-##
-# @X86CPURegister32:
-#
-# A X86 32-bit register
-#
-# Since: 1.5
-##
-{ 'enum': 'X86CPURegister32',
- 'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ] }
-
-##
-# @X86CPUFeatureWordInfo:
-#
-# Information about a X86 CPU feature word
-#
-# @cpuid-input-eax: Input EAX value for CPUID instruction for that feature word
-#
-# @cpuid-input-ecx: Input ECX value for CPUID instruction for that
-# feature word
-#
-# @cpuid-register: Output register containing the feature bits
-#
-# @features: value of output register, containing the feature bits
-#
-# Since: 1.5
-##
-{ 'struct': 'X86CPUFeatureWordInfo',
- 'data': { 'cpuid-input-eax': 'int',
- '*cpuid-input-ecx': 'int',
- 'cpuid-register': 'X86CPURegister32',
- 'features': 'int' } }
-
-##
-# @DummyForceArrays:
-#
-# Not used by QMP; hack to let us use X86CPUFeatureWordInfoList internally
-#
-# Since: 2.5
-##
-{ 'struct': 'DummyForceArrays',
- 'data': { 'unused': ['X86CPUFeatureWordInfo'] } }
-
-
-##
-# @NumaOptionsType:
-#
-# @node: NUMA nodes configuration
-#
-# @dist: NUMA distance configuration (since 2.10)
-#
-# @cpu: property based CPU(s) to node mapping (Since: 2.10)
-#
-# Since: 2.1
-##
-{ 'enum': 'NumaOptionsType',
- 'data': [ 'node', 'dist', 'cpu' ] }
-
-##
-# @NumaOptions:
-#
-# A discriminated record of NUMA options. (for OptsVisitor)
-#
-# Since: 2.1
-##
-{ 'union': 'NumaOptions',
- 'base': { 'type': 'NumaOptionsType' },
- 'discriminator': 'type',
- 'data': {
- 'node': 'NumaNodeOptions',
- 'dist': 'NumaDistOptions',
- 'cpu': 'NumaCpuOptions' }}
-
-##
-# @NumaNodeOptions:
-#
-# Create a guest NUMA node. (for OptsVisitor)
-#
-# @nodeid: NUMA node ID (increase by 1 from 0 if omitted)
-#
-# @cpus: VCPUs belonging to this node (assign VCPUS round-robin
-# if omitted)
-#
-# @mem: memory size of this node; mutually exclusive with @memdev.
-# Equally divide total memory among nodes if both @mem and @memdev are
-# omitted.
-#
-# @memdev: memory backend object. If specified for one node,
-# it must be specified for all nodes.
-#
-# Since: 2.1
-##
-{ 'struct': 'NumaNodeOptions',
- 'data': {
- '*nodeid': 'uint16',
- '*cpus': ['uint16'],
- '*mem': 'size',
- '*memdev': 'str' }}
-
-##
-# @NumaDistOptions:
-#
-# Set the distance between 2 NUMA nodes.
-#
-# @src: source NUMA node.
-#
-# @dst: destination NUMA node.
-#
-# @val: NUMA distance from source node to destination node.
-# When a node is unreachable from another node, set the distance
-# between them to 255.
-#
-# Since: 2.10
-##
-{ 'struct': 'NumaDistOptions',
- 'data': {
- 'src': 'uint16',
- 'dst': 'uint16',
- 'val': 'uint8' }}
-
-##
-# @NumaCpuOptions:
-#
-# Option "-numa cpu" overrides default cpu to node mapping.
-# It accepts the same set of cpu properties as returned by
-# query-hotpluggable-cpus[].props, where node-id could be used to
-# override default node mapping.
-#
-# Since: 2.10
-##
-{ 'struct': 'NumaCpuOptions',
- 'base': 'CpuInstanceProperties',
- 'data' : {} }
-
-##
-# @HostMemPolicy:
-#
-# Host memory policy types
-#
-# @default: restore default policy, remove any nondefault policy
-#
-# @preferred: set the preferred host nodes for allocation
-#
-# @bind: a strict policy that restricts memory allocation to the
-# host nodes specified
-#
-# @interleave: memory allocations are interleaved across the set
-# of host nodes specified
-#
-# Since: 2.1
-##
-{ 'enum': 'HostMemPolicy',
- 'data': [ 'default', 'preferred', 'bind', 'interleave' ] }
-
-##
-# @Memdev:
-#
-# Information about memory backend
-#
-# @id: backend's ID if backend has 'id' property (since 2.9)
-#
-# @size: memory backend size
-#
-# @merge: enables or disables memory merge support
-#
-# @dump: includes memory backend's memory in a core dump or not
-#
-# @prealloc: enables or disables memory preallocation
-#
-# @host-nodes: host nodes for its memory policy
-#
-# @policy: memory policy of memory backend
-#
-# Since: 2.1
-##
-{ 'struct': 'Memdev',
- 'data': {
- '*id': 'str',
- 'size': 'size',
- 'merge': 'bool',
- 'dump': 'bool',
- 'prealloc': 'bool',
- 'host-nodes': ['uint16'],
- 'policy': 'HostMemPolicy' }}
-
-##
-# @query-memdev:
-#
-# Returns information for all memory backends.
-#
-# Returns: a list of @Memdev.
-#
-# Since: 2.1
-#
-# Example:
-#
-# -> { "execute": "query-memdev" }
-# <- { "return": [
-# {
-# "id": "mem1",
-# "size": 536870912,
-# "merge": false,
-# "dump": true,
-# "prealloc": false,
-# "host-nodes": [0, 1],
-# "policy": "bind"
-# },
-# {
-# "size": 536870912,
-# "merge": false,
-# "dump": true,
-# "prealloc": true,
-# "host-nodes": [2, 3],
-# "policy": "preferred"
-# }
-# ]
-# }
-#
-##
-{ 'command': 'query-memdev', 'returns': ['Memdev'] }
-
-##
-# @PCDIMMDeviceInfo:
-#
-# PCDIMMDevice state information
-#
-# @id: device's ID
-#
-# @addr: physical address, where device is mapped
-#
-# @size: size of memory that the device provides
-#
-# @slot: slot number at which device is plugged in
-#
-# @node: NUMA node number where device is plugged in
-#
-# @memdev: memory backend linked with device
-#
-# @hotplugged: true if device was hotplugged
-#
-# @hotpluggable: true if device if could be added/removed while machine is
running
-#
-# Since: 2.1
-##
-{ 'struct': 'PCDIMMDeviceInfo',
- 'data': { '*id': 'str',
- 'addr': 'int',
- 'size': 'int',
- 'slot': 'int',
- 'node': 'int',
- 'memdev': 'str',
- 'hotplugged': 'bool',
- 'hotpluggable': 'bool'
- }
-}
-
-##
-# @MemoryDeviceInfo:
-#
-# Union containing information about a memory device
-#
-# Since: 2.1
-##
-{ 'union': 'MemoryDeviceInfo', 'data': {'dimm': 'PCDIMMDeviceInfo'} }
-
-##
-# @query-memory-devices:
-#
-# Lists available memory devices and their state
-#
-# Since: 2.1
-#
-# Example:
-#
-# -> { "execute": "query-memory-devices" }
-# <- { "return": [ { "data":
-# { "addr": 5368709120,
-# "hotpluggable": true,
-# "hotplugged": true,
-# "id": "d1",
-# "memdev": "/objects/memX",
-# "node": 0,
-# "size": 1073741824,
-# "slot": 0},
-# "type": "dimm"
-# } ] }
-#
-##
-{ 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] }
-
-##
-# @MEM_UNPLUG_ERROR:
-#
-# Emitted when memory hot unplug error occurs.
-#
-# @device: device name
-#
-# @msg: Informative message
-#
-# Since: 2.4
-#
-# Example:
-#
-# <- { "event": "MEM_UNPLUG_ERROR"
-# "data": { "device": "dimm1",
-# "msg": "acpi: device unplug for unsupported device"
-# },
-# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-#
-##
-{ 'event': 'MEM_UNPLUG_ERROR',
- 'data': { 'device': 'str', 'msg': 'str' } }
-
-##
-# @ACPISlotType:
-#
-# @DIMM: memory slot
-# @CPU: logical CPU slot (since 2.7)
-##
-{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] }
-
-##
-# @ACPIOSTInfo:
-#
-# OSPM Status Indication for a device
-# For description of possible values of @source and @status fields
-# see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec.
-#
-# @device: device ID associated with slot
-#
-# @slot: slot ID, unique per slot of a given @slot-type
-#
-# @slot-type: type of the slot
-#
-# @source: an integer containing the source event
-#
-# @status: an integer containing the status code
-#
-# Since: 2.1
-##
-{ 'struct': 'ACPIOSTInfo',
- 'data' : { '*device': 'str',
- 'slot': 'str',
- 'slot-type': 'ACPISlotType',
- 'source': 'int',
- 'status': 'int' } }
-
-##
-# @query-acpi-ospm-status:
-#
-# Return a list of ACPIOSTInfo for devices that support status
-# reporting via ACPI _OST method.
-#
-# Since: 2.1
-#
-# Example:
-#
-# -> { "execute": "query-acpi-ospm-status" }
-# <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM",
"source": 1, "status": 0},
-# { "slot": "1", "slot-type": "DIMM", "source": 0, "status":
0},
-# { "slot": "2", "slot-type": "DIMM", "source": 0, "status":
0},
-# { "slot": "3", "slot-type": "DIMM", "source": 0, "status":
0}
-# ]}
-#
-##
-{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] }
-
-##
-# @ACPI_DEVICE_OST:
-#
-# Emitted when guest executes ACPI _OST method.
-#
-# @info: ACPIOSTInfo type as described in qapi-schema.json
-#
-# Since: 2.1
-#
-# Example:
-#
-# <- { "event": "ACPI_DEVICE_OST",
-# "data": { "device": "d1", "slot": "0",
-# "slot-type": "DIMM", "source": 1, "status": 0 } }
-#
-##
-{ 'event': 'ACPI_DEVICE_OST',
- 'data': { 'info': 'ACPIOSTInfo' } }
-
-##
-# @rtc-reset-reinjection:
-#
-# This command will reset the RTC interrupt reinjection backlog.
-# Can be used if another mechanism to synchronize guest time
-# is in effect, for example QEMU guest agent's guest-set-time
-# command.
-#
-# Since: 2.1
-#
-# Example:
-#
-# -> { "execute": "rtc-reset-reinjection" }
-# <- { "return": {} }
-#
-##
-{ 'command': 'rtc-reset-reinjection' }
-
-##
-# @RTC_CHANGE:
-#
-# Emitted when the guest changes the RTC time.
-#
-# @offset: offset between base RTC clock (as specified by -rtc base), and
-# new RTC clock value
-#
-# Note: This event is rate-limited.
-#
-# Since: 0.13.0
-#
-# Example:
-#
-# <- { "event": "RTC_CHANGE",
-# "data": { "offset": 78 },
-# "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
-#
-##
-{ 'event': 'RTC_CHANGE',
- 'data': { 'offset': 'int' } }
-
-##
-# @ReplayMode:
-#
-# Mode of the replay subsystem.
-#
-# @none: normal execution mode. Replay or record are not enabled.
-#
-# @record: record mode. All non-deterministic data is written into the
-# replay log.
-#
-# @play: replay mode. Non-deterministic data required for system execution
-# is read from the log.
-#
-# Since: 2.5
-##
-{ 'enum': 'ReplayMode',
- 'data': [ 'none', 'record', 'play' ] }
-
-##
-# @xen-load-devices-state:
-#
-# Load the state of all devices from file. The RAM and the block devices
-# of the VM are not loaded by this command.
-#
-# @filename: the file to load the state of the devices from as binary
-# data. See xen-save-devices-state.txt for a description of the binary
-# format.
-#
-# Since: 2.7
-#
-# Example:
-#
-# -> { "execute": "xen-load-devices-state",
-# "arguments": { "filename": "/tmp/resume" } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} }
-
-##
-# @GICCapability:
-#
-# The struct describes capability for a specific GIC (Generic
-# Interrupt Controller) version. These bits are not only decided by
-# QEMU/KVM software version, but also decided by the hardware that
-# the program is running upon.
-#
-# @version: version of GIC to be described. Currently, only 2 and 3
-# are supported.
-#
-# @emulated: whether current QEMU/hardware supports emulated GIC
-# device in user space.
-#
-# @kernel: whether current QEMU/hardware supports hardware
-# accelerated GIC device in kernel.
-#
-# Since: 2.6
-##
-{ 'struct': 'GICCapability',
- 'data': { 'version': 'int',
- 'emulated': 'bool',
- 'kernel': 'bool' } }
-
-##
-# @query-gic-capabilities:
-#
-# This command is ARM-only. It will return a list of GICCapability
-# objects that describe its capability bits.
-#
-# Returns: a list of GICCapability objects.
-#
-# Since: 2.6
-#
-# Example:
-#
-# -> { "execute": "query-gic-capabilities" }
-# <- { "return": [{ "version": 2, "emulated": true, "kernel": false },
-# { "version": 3, "emulated": false, "kernel": true } ] }
-#
-##
-{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'] }
-
-##
-# @CpuInstanceProperties:
-#
-# List of properties to be used for hotplugging a CPU instance,
-# it should be passed by management with device_add command when
-# a CPU is being hotplugged.
-#
-# @node-id: NUMA node ID the CPU belongs to
-# @socket-id: socket number within node/board the CPU belongs to
-# @core-id: core number within socket the CPU belongs to
-# @thread-id: thread number within core the CPU belongs to
-#
-# Note: currently there are 4 properties that could be present
-# but management should be prepared to pass through other
-# properties with device_add command to allow for future
-# interface extension. This also requires the filed names to be kept in
-# sync with the properties passed to -device/device_add.
-#
-# Since: 2.7
-##
-{ 'struct': 'CpuInstanceProperties',
- 'data': { '*node-id': 'int',
- '*socket-id': 'int',
- '*core-id': 'int',
- '*thread-id': 'int'
- }
-}
-
-##
-# @HotpluggableCPU:
-#
-# @type: CPU object type for usage with device_add command
-# @props: list of properties to be used for hotplugging CPU
-# @vcpus-count: number of logical VCPU threads @HotpluggableCPU provides
-# @qom-path: link to existing CPU object if CPU is present or
-# omitted if CPU is not present.
-#
-# Since: 2.7
-##
-{ 'struct': 'HotpluggableCPU',
- 'data': { 'type': 'str',
- 'vcpus-count': 'int',
- 'props': 'CpuInstanceProperties',
- '*qom-path': 'str'
- }
-}
-
-##
-# @query-hotpluggable-cpus:
-#
-# Returns: a list of HotpluggableCPU objects.
-#
-# Since: 2.7
-#
-# Example:
-#
-# For pseries machine type started with -smp 2,cores=2,maxcpus=4 -cpu POWER8:
-#
-# -> { "execute": "query-hotpluggable-cpus" }
-# <- {"return": [
-# { "props": { "core": 8 }, "type": "POWER8-spapr-cpu-core",
-# "vcpus-count": 1 },
-# { "props": { "core": 0 }, "type": "POWER8-spapr-cpu-core",
-# "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]"}
-# ]}'
-#
-# For pc machine type started with -smp 1,maxcpus=2:
-#
-# -> { "execute": "query-hotpluggable-cpus" }
-# <- {"return": [
-# {
-# "type": "qemu64-x86_64-cpu", "vcpus-count": 1,
-# "props": {"core-id": 0, "socket-id": 1, "thread-id": 0}
-# },
-# {
-# "qom-path": "/machine/unattached/device[0]",
-# "type": "qemu64-x86_64-cpu", "vcpus-count": 1,
-# "props": {"core-id": 0, "socket-id": 0, "thread-id": 0}
-# }
-# ]}
-#
-# For s390x-virtio-ccw machine type started with -smp 1,maxcpus=2 -cpu qemu
-# (Since: 2.11):
-#
-# -> { "execute": "query-hotpluggable-cpus" }
-# <- {"return": [
-# {
-# "type": "qemu-s390x-cpu", "vcpus-count": 1,
-# "props": { "core-id": 1 }
-# },
-# {
-# "qom-path": "/machine/unattached/device[0]",
-# "type": "qemu-s390x-cpu", "vcpus-count": 1,
-# "props": { "core-id": 0 }
-# }
-# ]}
-#
-##
-{ 'command': 'query-hotpluggable-cpus', 'returns': ['HotpluggableCPU'] }
-
-##
-# @GuidInfo:
-#
-# GUID information.
-#
-# @guid: the globally unique identifier
-#
-# Since: 2.9
-##
-{ 'struct': 'GuidInfo', 'data': {'guid': 'str'} }
-
-##
-# @query-vm-generation-id:
-#
-# Show Virtual Machine Generation ID
-#
-# Since: 2.9
-##
-{ 'command': 'query-vm-generation-id', 'returns': 'GuidInfo' }
+{ 'include': 'qapi/misc.json' }
diff --git a/qapi/misc.json b/qapi/misc.json
new file mode 100644
index 00000000000..dabc987f7a7
--- /dev/null
+++ b/qapi/misc.json
@@ -0,0 +1,3201 @@
+# -*- Mode: Python -*-
+#
+
+##
+# = Miscellanea
+##
+
+##
+# @qmp_capabilities:
+#
+# Enable QMP capabilities.
+#
+# Arguments: None.
+#
+# Example:
+#
+# -> { "execute": "qmp_capabilities" }
+# <- { "return": {} }
+#
+# Notes: This command is valid exactly when first connecting: it must be
+# issued before any other command will be accepted, and will fail once the
+# monitor is accepting other commands. (see qemu docs/interop/qmp-spec.txt)
+#
+# Since: 0.13
+#
+##
+{ 'command': 'qmp_capabilities' }
+
+##
+# @VersionTriple:
+#
+# A three-part version number.
+#
+# @major: The major version number.
+#
+# @minor: The minor version number.
+#
+# @micro: The micro version number.
+#
+# Since: 2.4
+##
+{ 'struct': 'VersionTriple',
+ 'data': {'major': 'int', 'minor': 'int', 'micro': 'int'} }
+
+
+##
+# @VersionInfo:
+#
+# A description of QEMU's version.
+#
+# @qemu: The version of QEMU. By current convention, a micro
+# version of 50 signifies a development branch. A micro version
+# greater than or equal to 90 signifies a release candidate for
+# the next minor version. A micro version of less than 50
+# signifies a stable release.
+#
+# @package: QEMU will always set this field to an empty string. Downstream
+# versions of QEMU should set this to a non-empty string. The
+# exact format depends on the downstream however it highly
+# recommended that a unique name is used.
+#
+# Since: 0.14.0
+##
+{ 'struct': 'VersionInfo',
+ 'data': {'qemu': 'VersionTriple', 'package': 'str'} }
+
+##
+# @query-version:
+#
+# Returns the current version of QEMU.
+#
+# Returns: A @VersionInfo object describing the current version of QEMU.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "query-version" }
+# <- {
+# "return":{
+# "qemu":{
+# "major":0,
+# "minor":11,
+# "micro":5
+# },
+# "package":""
+# }
+# }
+#
+##
+{ 'command': 'query-version', 'returns': 'VersionInfo' }
+
+##
+# @CommandInfo:
+#
+# Information about a QMP command
+#
+# @name: The command name
+#
+# Since: 0.14.0
+##
+{ 'struct': 'CommandInfo', 'data': {'name': 'str'} }
+
+##
+# @query-commands:
+#
+# Return a list of supported QMP commands by this server
+#
+# Returns: A list of @CommandInfo for all supported commands
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "query-commands" }
+# <- {
+# "return":[
+# {
+# "name":"query-balloon"
+# },
+# {
+# "name":"system_powerdown"
+# }
+# ]
+# }
+#
+# Note: This example has been shortened as the real response is too long.
+#
+##
+{ 'command': 'query-commands', 'returns': ['CommandInfo'] }
+
+##
+# @LostTickPolicy:
+#
+# Policy for handling lost ticks in timer devices.
+#
+# @discard: throw away the missed tick(s) and continue with future injection
+# normally. Guest time may be delayed, unless the OS has explicit
+# handling of lost ticks
+#
+# @delay: continue to deliver ticks at the normal rate. Guest time will be
+# delayed due to the late tick
+#
+# @merge: merge the missed tick(s) into one tick and inject. Guest time
+# may be delayed, depending on how the OS reacts to the merging
+# of ticks
+#
+# @slew: deliver ticks at a higher rate to catch up with the missed tick. The
+# guest time should not be delayed once catchup is complete.
+#
+# Since: 2.0
+##
+{ 'enum': 'LostTickPolicy',
+ 'data': ['discard', 'delay', 'merge', 'slew' ] }
+
+##
+# @add_client:
+#
+# Allow client connections for VNC, Spice and socket based
+# character devices to be passed in to QEMU via SCM_RIGHTS.
+#
+# @protocol: protocol name. Valid names are "vnc", "spice" or the
+# name of a character device (eg. from -chardev id=XXXX)
+#
+# @fdname: file descriptor name previously passed via 'getfd' command
+#
+# @skipauth: whether to skip authentication. Only applies
+# to "vnc" and "spice" protocols
+#
+# @tls: whether to perform TLS. Only applies to the "spice"
+# protocol
+#
+# Returns: nothing on success.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "add_client", "arguments": { "protocol": "vnc",
+# "fdname": "myclient" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'add_client',
+ 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool',
+ '*tls': 'bool' } }
+
+##
+# @NameInfo:
+#
+# Guest name information.
+#
+# @name: The name of the guest
+#
+# Since: 0.14.0
+##
+{ 'struct': 'NameInfo', 'data': {'*name': 'str'} }
+
+##
+# @query-name:
+#
+# Return the name information of a guest.
+#
+# Returns: @NameInfo of the guest
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "query-name" }
+# <- { "return": { "name": "qemu-name" } }
+#
+##
+{ 'command': 'query-name', 'returns': 'NameInfo' }
+
+##
+# @KvmInfo:
+#
+# Information about support for KVM acceleration
+#
+# @enabled: true if KVM acceleration is active
+#
+# @present: true if KVM acceleration is built into this executable
+#
+# Since: 0.14.0
+##
+{ 'struct': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} }
+
+##
+# @query-kvm:
+#
+# Returns information about KVM acceleration
+#
+# Returns: @KvmInfo
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "query-kvm" }
+# <- { "return": { "enabled": true, "present": true } }
+#
+##
+{ 'command': 'query-kvm', 'returns': 'KvmInfo' }
+
+##
+# @UuidInfo:
+#
+# Guest UUID information (Universally Unique Identifier).
+#
+# @UUID: the UUID of the guest
+#
+# Since: 0.14.0
+#
+# Notes: If no UUID was specified for the guest, a null UUID is returned.
+##
+{ 'struct': 'UuidInfo', 'data': {'UUID': 'str'} }
+
+##
+# @query-uuid:
+#
+# Query the guest UUID information.
+#
+# Returns: The @UuidInfo for the guest
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "query-uuid" }
+# <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
+#
+##
+{ 'command': 'query-uuid', 'returns': 'UuidInfo' }
+
+##
+# @EventInfo:
+#
+# Information about a QMP event
+#
+# @name: The event name
+#
+# Since: 1.2.0
+##
+{ 'struct': 'EventInfo', 'data': {'name': 'str'} }
+
+##
+# @query-events:
+#
+# Return a list of supported QMP events by this server
+#
+# Returns: A list of @EventInfo for all supported events
+#
+# Since: 1.2.0
+#
+# Example:
+#
+# -> { "execute": "query-events" }
+# <- {
+# "return": [
+# {
+# "name":"SHUTDOWN"
+# },
+# {
+# "name":"RESET"
+# }
+# ]
+# }
+#
+# Note: This example has been shortened as the real response is too long.
+#
+##
+{ 'command': 'query-events', 'returns': ['EventInfo'] }
+
+##
+# @CpuInfoArch:
+#
+# An enumeration of cpu types that enable additional information during
+# @query-cpus and @query-cpus-fast.
+#
+# @s390: since 2.12
+#
+# Since: 2.6
+##
+{ 'enum': 'CpuInfoArch',
+ 'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 's390', 'other' ] }
+
+##
+# @CpuInfo:
+#
+# Information about a virtual CPU
+#
+# @CPU: the index of the virtual CPU
+#
+# @current: this only exists for backwards compatibility and should be ignored
+#
+# @halted: true if the virtual CPU is in the halt state. Halt usually refers
+# to a processor specific low power mode.
+#
+# @qom_path: path to the CPU object in the QOM tree (since 2.4)
+#
+# @thread_id: ID of the underlying host thread
+#
+# @props: properties describing to which node/socket/core/thread
+# virtual CPU belongs to, provided if supported by board (since 2.10)
+#
+# @arch: architecture of the cpu, which determines which additional fields
+# will be listed (since 2.6)
+#
+# Since: 0.14.0
+#
+# Notes: @halted is a transient state that changes frequently. By the time the
+# data is sent to the client, the guest may no longer be halted.
+##
+{ 'union': 'CpuInfo',
+ 'base': {'CPU': 'int', 'current': 'bool', 'halted': 'bool',
+ 'qom_path': 'str', 'thread_id': 'int',
+ '*props': 'CpuInstanceProperties', 'arch': 'CpuInfoArch' },
+ 'discriminator': 'arch',
+ 'data': { 'x86': 'CpuInfoX86',
+ 'sparc': 'CpuInfoSPARC',
+ 'ppc': 'CpuInfoPPC',
+ 'mips': 'CpuInfoMIPS',
+ 'tricore': 'CpuInfoTricore',
+ 's390': 'CpuInfoS390',
+ 'other': 'CpuInfoOther' } }
+
+##
+# @CpuInfoX86:
+#
+# Additional information about a virtual i386 or x86_64 CPU
+#
+# @pc: the 64-bit instruction pointer
+#
+# Since: 2.6
+##
+{ 'struct': 'CpuInfoX86', 'data': { 'pc': 'int' } }
+
+##
+# @CpuInfoSPARC:
+#
+# Additional information about a virtual SPARC CPU
+#
+# @pc: the PC component of the instruction pointer
+#
+# @npc: the NPC component of the instruction pointer
+#
+# Since: 2.6
+##
+{ 'struct': 'CpuInfoSPARC', 'data': { 'pc': 'int', 'npc': 'int' } }
+
+##
+# @CpuInfoPPC:
+#
+# Additional information about a virtual PPC CPU
+#
+# @nip: the instruction pointer
+#
+# Since: 2.6
+##
+{ 'struct': 'CpuInfoPPC', 'data': { 'nip': 'int' } }
+
+##
+# @CpuInfoMIPS:
+#
+# Additional information about a virtual MIPS CPU
+#
+# @PC: the instruction pointer
+#
+# Since: 2.6
+##
+{ 'struct': 'CpuInfoMIPS', 'data': { 'PC': 'int' } }
+
+##
+# @CpuInfoTricore:
+#
+# Additional information about a virtual Tricore CPU
+#
+# @PC: the instruction pointer
+#
+# Since: 2.6
+##
+{ 'struct': 'CpuInfoTricore', 'data': { 'PC': 'int' } }
+
+##
+# @CpuInfoOther:
+#
+# No additional information is available about the virtual CPU
+#
+# Since: 2.6
+#
+##
+{ 'struct': 'CpuInfoOther', 'data': { } }
+
+##
+# @CpuS390State:
+#
+# An enumeration of cpu states that can be assumed by a virtual
+# S390 CPU
+#
+# Since: 2.12
+##
+{ 'enum': 'CpuS390State',
+ 'prefix': 'S390_CPU_STATE',
+ 'data': [ 'uninitialized', 'stopped', 'check-stop', 'operating', 'load' ] }
+
+##
+# @CpuInfoS390:
+#
+# Additional information about a virtual S390 CPU
+#
+# @cpu-state: the virtual CPU's state
+#
+# Since: 2.12
+##
+{ 'struct': 'CpuInfoS390', 'data': { 'cpu-state': 'CpuS390State' } }
+
+##
+# @query-cpus:
+#
+# Returns a list of information about each virtual CPU.
+#
+# This command causes vCPU threads to exit to userspace, which causes
+# a small interruption to guest CPU execution. This will have a negative
+# impact on realtime guests and other latency sensitive guest workloads.
+# It is recommended to use @query-cpus-fast instead of this command to
+# avoid the vCPU interruption.
+#
+# Returns: a list of @CpuInfo for each virtual CPU
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "query-cpus" }
+# <- { "return": [
+# {
+# "CPU":0,
+# "current":true,
+# "halted":false,
+# "qom_path":"/machine/unattached/device[0]",
+# "arch":"x86",
+# "pc":3227107138,
+# "thread_id":3134
+# },
+# {
+# "CPU":1,
+# "current":false,
+# "halted":true,
+# "qom_path":"/machine/unattached/device[2]",
+# "arch":"x86",
+# "pc":7108165,
+# "thread_id":3135
+# }
+# ]
+# }
+#
+# Notes: This interface is deprecated (since 2.12.0), and it is strongly
+# recommended that you avoid using it. Use @query-cpus-fast to
+# obtain information about virtual CPUs.
+#
+##
+{ 'command': 'query-cpus', 'returns': ['CpuInfo'] }
+
+##
+# @CpuInfoFast:
+#
+# Information about a virtual CPU
+#
+# @cpu-index: index of the virtual CPU
+#
+# @qom-path: path to the CPU object in the QOM tree
+#
+# @thread-id: ID of the underlying host thread
+#
+# @props: properties describing to which node/socket/core/thread
+# virtual CPU belongs to, provided if supported by board
+#
+# @arch: architecture of the cpu, which determines which additional fields
+# will be listed
+#
+# Since: 2.12
+#
+##
+{ 'union': 'CpuInfoFast',
+ 'base': {'cpu-index': 'int', 'qom-path': 'str',
+ 'thread-id': 'int', '*props': 'CpuInstanceProperties',
+ 'arch': 'CpuInfoArch' },
+ 'discriminator': 'arch',
+ 'data': { 'x86': 'CpuInfoOther',
+ 'sparc': 'CpuInfoOther',
+ 'ppc': 'CpuInfoOther',
+ 'mips': 'CpuInfoOther',
+ 'tricore': 'CpuInfoOther',
+ 's390': 'CpuInfoS390',
+ 'other': 'CpuInfoOther' } }
+
+##
+# @query-cpus-fast:
+#
+# Returns information about all virtual CPUs. This command does not
+# incur a performance penalty and should be used in production
+# instead of query-cpus.
+#
+# Returns: list of @CpuInfoFast
+#
+# Since: 2.12
+#
+# Example:
+#
+# -> { "execute": "query-cpus-fast" }
+# <- { "return": [
+# {
+# "thread-id": 25627,
+# "props": {
+# "core-id": 0,
+# "thread-id": 0,
+# "socket-id": 0
+# },
+# "qom-path": "/machine/unattached/device[0]",
+# "arch":"x86",
+# "cpu-index": 0
+# },
+# {
+# "thread-id": 25628,
+# "props": {
+# "core-id": 0,
+# "thread-id": 0,
+# "socket-id": 1
+# },
+# "qom-path": "/machine/unattached/device[2]",
+# "arch":"x86",
+# "cpu-index": 1
+# }
+# ]
+# }
+##
+{ 'command': 'query-cpus-fast', 'returns': [ 'CpuInfoFast' ] }
+
+##
+# @IOThreadInfo:
+#
+# Information about an iothread
+#
+# @id: the identifier of the iothread
+#
+# @thread-id: ID of the underlying host thread
+#
+# @poll-max-ns: maximum polling time in ns, 0 means polling is disabled
+# (since 2.9)
+#
+# @poll-grow: how many ns will be added to polling time, 0 means that it's not
+# configured (since 2.9)
+#
+# @poll-shrink: how many ns will be removed from polling time, 0 means that
+# it's not configured (since 2.9)
+#
+# Since: 2.0
+##
+{ 'struct': 'IOThreadInfo',
+ 'data': {'id': 'str',
+ 'thread-id': 'int',
+ 'poll-max-ns': 'int',
+ 'poll-grow': 'int',
+ 'poll-shrink': 'int' } }
+
+##
+# @query-iothreads:
+#
+# Returns a list of information about each iothread.
+#
+# Note: this list excludes the QEMU main loop thread, which is not declared
+# using the -object iothread command-line option. It is always the main thread
+# of the process.
+#
+# Returns: a list of @IOThreadInfo for each iothread
+#
+# Since: 2.0
+#
+# Example:
+#
+# -> { "execute": "query-iothreads" }
+# <- { "return": [
+# {
+# "id":"iothread0",
+# "thread-id":3134
+# },
+# {
+# "id":"iothread1",
+# "thread-id":3135
+# }
+# ]
+# }
+#
+##
+{ 'command': 'query-iothreads', 'returns': ['IOThreadInfo'] }
+
+##
+# @BalloonInfo:
+#
+# Information about the guest balloon device.
+#
+# @actual: the number of bytes the balloon currently contains
+#
+# Since: 0.14.0
+#
+##
+{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } }
+
+##
+# @query-balloon:
+#
+# Return information about the balloon device.
+#
+# Returns: @BalloonInfo on success
+#
+# If the balloon driver is enabled but not functional because the KVM
+# kernel module cannot support it, KvmMissingCap
+#
+# If no balloon device is present, DeviceNotActive
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "query-balloon" }
+# <- { "return": {
+# "actual": 1073741824,
+# }
+# }
+#
+##
+{ 'command': 'query-balloon', 'returns': 'BalloonInfo' }
+
+##
+# @BALLOON_CHANGE:
+#
+# Emitted when the guest changes the actual BALLOON level. This value is
+# equivalent to the @actual field return by the 'query-balloon' command
+#
+# @actual: actual level of the guest memory balloon in bytes
+#
+# Note: this event is rate-limited.
+#
+# Since: 1.2
+#
+# Example:
+#
+# <- { "event": "BALLOON_CHANGE",
+# "data": { "actual": 944766976 },
+# "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
+#
+##
+{ 'event': 'BALLOON_CHANGE',
+ 'data': { 'actual': 'int' } }
+
+##
+# @PciMemoryRange:
+#
+# A PCI device memory region
+#
+# @base: the starting address (guest physical)
+#
+# @limit: the ending address (guest physical)
+#
+# Since: 0.14.0
+##
+{ 'struct': 'PciMemoryRange', 'data': {'base': 'int', 'limit': 'int'} }
+
+##
+# @PciMemoryRegion:
+#
+# Information about a PCI device I/O region.
+#
+# @bar: the index of the Base Address Register for this region
+#
+# @type: 'io' if the region is a PIO region
+# 'memory' if the region is a MMIO region
+#
+# @size: memory size
+#
+# @prefetch: if @type is 'memory', true if the memory is prefetchable
+#
+# @mem_type_64: if @type is 'memory', true if the BAR is 64-bit
+#
+# Since: 0.14.0
+##
+{ 'struct': 'PciMemoryRegion',
+ 'data': {'bar': 'int', 'type': 'str', 'address': 'int', 'size': 'int',
+ '*prefetch': 'bool', '*mem_type_64': 'bool' } }
+
+##
+# @PciBusInfo:
+#
+# Information about a bus of a PCI Bridge device
+#
+# @number: primary bus interface number. This should be the number of the
+# bus the device resides on.
+#
+# @secondary: secondary bus interface number. This is the number of the
+# main bus for the bridge
+#
+# @subordinate: This is the highest number bus that resides below the
+# bridge.
+#
+# @io_range: The PIO range for all devices on this bridge
+#
+# @memory_range: The MMIO range for all devices on this bridge
+#
+# @prefetchable_range: The range of prefetchable MMIO for all devices on
+# this bridge
+#
+# Since: 2.4
+##
+{ 'struct': 'PciBusInfo',
+ 'data': {'number': 'int', 'secondary': 'int', 'subordinate': 'int',
+ 'io_range': 'PciMemoryRange',
+ 'memory_range': 'PciMemoryRange',
+ 'prefetchable_range': 'PciMemoryRange' } }
+
+##
+# @PciBridgeInfo:
+#
+# Information about a PCI Bridge device
+#
+# @bus: information about the bus the device resides on
+#
+# @devices: a list of @PciDeviceInfo for each device on this bridge
+#
+# Since: 0.14.0
+##
+{ 'struct': 'PciBridgeInfo',
+ 'data': {'bus': 'PciBusInfo', '*devices': ['PciDeviceInfo']} }
+
+##
+# @PciDeviceClass:
+#
+# Information about the Class of a PCI device
+#
+# @desc: a string description of the device's class
+#
+# @class: the class code of the device
+#
+# Since: 2.4
+##
+{ 'struct': 'PciDeviceClass',
+ 'data': {'*desc': 'str', 'class': 'int'} }
+
+##
+# @PciDeviceId:
+#
+# Information about the Id of a PCI device
+#
+# @device: the PCI device id
+#
+# @vendor: the PCI vendor id
+#
+# Since: 2.4
+##
+{ 'struct': 'PciDeviceId',
+ 'data': {'device': 'int', 'vendor': 'int'} }
+
+##
+# @PciDeviceInfo:
+#
+# Information about a PCI device
+#
+# @bus: the bus number of the device
+#
+# @slot: the slot the device is located in
+#
+# @function: the function of the slot used by the device
+#
+# @class_info: the class of the device
+#
+# @id: the PCI device id
+#
+# @irq: if an IRQ is assigned to the device, the IRQ number
+#
+# @qdev_id: the device name of the PCI device
+#
+# @pci_bridge: if the device is a PCI bridge, the bridge information
+#
+# @regions: a list of the PCI I/O regions associated with the device
+#
+# Notes: the contents of @class_info.desc are not stable and should only be
+# treated as informational.
+#
+# Since: 0.14.0
+##
+{ 'struct': 'PciDeviceInfo',
+ 'data': {'bus': 'int', 'slot': 'int', 'function': 'int',
+ 'class_info': 'PciDeviceClass', 'id': 'PciDeviceId',
+ '*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo',
+ 'regions': ['PciMemoryRegion']} }
+
+##
+# @PciInfo:
+#
+# Information about a PCI bus
+#
+# @bus: the bus index
+#
+# @devices: a list of devices on this bus
+#
+# Since: 0.14.0
+##
+{ 'struct': 'PciInfo', 'data': {'bus': 'int', 'devices': ['PciDeviceInfo']} }
+
+##
+# @query-pci:
+#
+# Return information about the PCI bus topology of the guest.
+#
+# Returns: a list of @PciInfo for each PCI bus. Each bus is
+# represented by a json-object, which has a key with a json-array of
+# all PCI devices attached to it. Each device is represented by a
+# json-object.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "query-pci" }
+# <- { "return": [
+# {
+# "bus": 0,
+# "devices": [
+# {
+# "bus": 0,
+# "qdev_id": "",
+# "slot": 0,
+# "class_info": {
+# "class": 1536,
+# "desc": "Host bridge"
+# },
+# "id": {
+# "device": 32902,
+# "vendor": 4663
+# },
+# "function": 0,
+# "regions": [
+# ]
+# },
+# {
+# "bus": 0,
+# "qdev_id": "",
+# "slot": 1,
+# "class_info": {
+# "class": 1537,
+# "desc": "ISA bridge"
+# },
+# "id": {
+# "device": 32902,
+# "vendor": 28672
+# },
+# "function": 0,
+# "regions": [
+# ]
+# },
+# {
+# "bus": 0,
+# "qdev_id": "",
+# "slot": 1,
+# "class_info": {
+# "class": 257,
+# "desc": "IDE controller"
+# },
+# "id": {
+# "device": 32902,
+# "vendor": 28688
+# },
+# "function": 1,
+# "regions": [
+# {
+# "bar": 4,
+# "size": 16,
+# "address": 49152,
+# "type": "io"
+# }
+# ]
+# },
+# {
+# "bus": 0,
+# "qdev_id": "",
+# "slot": 2,
+# "class_info": {
+# "class": 768,
+# "desc": "VGA controller"
+# },
+# "id": {
+# "device": 4115,
+# "vendor": 184
+# },
+# "function": 0,
+# "regions": [
+# {
+# "prefetch": true,
+# "mem_type_64": false,
+# "bar": 0,
+# "size": 33554432,
+# "address": 4026531840,
+# "type": "memory"
+# },
+# {
+# "prefetch": false,
+# "mem_type_64": false,
+# "bar": 1,
+# "size": 4096,
+# "address": 4060086272,
+# "type": "memory"
+# },
+# {
+# "prefetch": false,
+# "mem_type_64": false,
+# "bar": 6,
+# "size": 65536,
+# "address": -1,
+# "type": "memory"
+# }
+# ]
+# },
+# {
+# "bus": 0,
+# "qdev_id": "",
+# "irq": 11,
+# "slot": 4,
+# "class_info": {
+# "class": 1280,
+# "desc": "RAM controller"
+# },
+# "id": {
+# "device": 6900,
+# "vendor": 4098
+# },
+# "function": 0,
+# "regions": [
+# {
+# "bar": 0,
+# "size": 32,
+# "address": 49280,
+# "type": "io"
+# }
+# ]
+# }
+# ]
+# }
+# ]
+# }
+#
+# Note: This example has been shortened as the real response is too long.
+#
+##
+{ 'command': 'query-pci', 'returns': ['PciInfo'] }
+
+##
+# @quit:
+#
+# This command will cause the QEMU process to exit gracefully. While every
+# attempt is made to send the QMP response before terminating, this is not
+# guaranteed. When using this interface, a premature EOF would not be
+# unexpected.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "quit" }
+# <- { "return": {} }
+##
+{ 'command': 'quit' }
+
+##
+# @stop:
+#
+# Stop all guest VCPU execution.
+#
+# Since: 0.14.0
+#
+# Notes: This function will succeed even if the guest is already in the
stopped
+# state. In "inmigrate" state, it will ensure that the guest
+# remains paused once migration finishes, as if the -S option was
+# passed on the command line.
+#
+# Example:
+#
+# -> { "execute": "stop" }
+# <- { "return": {} }
+#
+##
+{ 'command': 'stop' }
+
+##
+# @system_reset:
+#
+# Performs a hard reset of a guest.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "system_reset" }
+# <- { "return": {} }
+#
+##
+{ 'command': 'system_reset' }
+
+##
+# @system_powerdown:
+#
+# Requests that a guest perform a powerdown operation.
+#
+# Since: 0.14.0
+#
+# Notes: A guest may or may not respond to this command. This command
+# returning does not indicate that a guest has accepted the request or
+# that it has shut down. Many guests will respond to this command by
+# prompting the user in some way.
+# Example:
+#
+# -> { "execute": "system_powerdown" }
+# <- { "return": {} }
+#
+##
+{ 'command': 'system_powerdown' }
+
+##
+# @cpu-add:
+#
+# Adds CPU with specified ID
+#
+# @id: ID of CPU to be created, valid values [0..max_cpus)
+#
+# Returns: Nothing on success
+#
+# Since: 1.5
+#
+# Example:
+#
+# -> { "execute": "cpu-add", "arguments": { "id": 2 } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'cpu-add', 'data': {'id': 'int'} }
+
+##
+# @memsave:
+#
+# Save a portion of guest memory to a file.
+#
+# @val: the virtual address of the guest to start from
+#
+# @size: the size of memory region to save
+#
+# @filename: the file to save the memory to as binary data
+#
+# @cpu-index: the index of the virtual CPU to use for translating the
+# virtual address (defaults to CPU 0)
+#
+# Returns: Nothing on success
+#
+# Since: 0.14.0
+#
+# Notes: Errors were not reliably returned until 1.1
+#
+# Example:
+#
+# -> { "execute": "memsave",
+# "arguments": { "val": 10,
+# "size": 100,
+# "filename": "/tmp/virtual-mem-dump" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'memsave',
+ 'data': {'val': 'int', 'size': 'int', 'filename': 'str', '*cpu-index':
'int'} }
+
+##
+# @pmemsave:
+#
+# Save a portion of guest physical memory to a file.
+#
+# @val: the physical address of the guest to start from
+#
+# @size: the size of memory region to save
+#
+# @filename: the file to save the memory to as binary data
+#
+# Returns: Nothing on success
+#
+# Since: 0.14.0
+#
+# Notes: Errors were not reliably returned until 1.1
+#
+# Example:
+#
+# -> { "execute": "pmemsave",
+# "arguments": { "val": 10,
+# "size": 100,
+# "filename": "/tmp/physical-mem-dump" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'pmemsave',
+ 'data': {'val': 'int', 'size': 'int', 'filename': 'str'} }
+
+##
+# @cont:
+#
+# Resume guest VCPU execution.
+#
+# Since: 0.14.0
+#
+# Returns: If successful, nothing
+#
+# Notes: This command will succeed if the guest is currently running. It
+# will also succeed if the guest is in the "inmigrate" state; in
+# this case, the effect of the command is to make sure the guest
+# starts once migration finishes, removing the effect of the -S
+# command line option if it was passed.
+#
+# Example:
+#
+# -> { "execute": "cont" }
+# <- { "return": {} }
+#
+##
+{ 'command': 'cont' }
+
+##
+# @system_wakeup:
+#
+# Wakeup guest from suspend. Does nothing in case the guest isn't suspended.
+#
+# Since: 1.1
+#
+# Returns: nothing.
+#
+# Example:
+#
+# -> { "execute": "system_wakeup" }
+# <- { "return": {} }
+#
+##
+{ 'command': 'system_wakeup' }
+
+##
+# @inject-nmi:
+#
+# Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or all CPUs
(ppc64).
+# The command fails when the guest doesn't support injecting.
+#
+# Returns: If successful, nothing
+#
+# Since: 0.14.0
+#
+# Note: prior to 2.1, this command was only supported for x86 and s390 VMs
+#
+# Example:
+#
+# -> { "execute": "inject-nmi" }
+# <- { "return": {} }
+#
+##
+{ 'command': 'inject-nmi' }
+
+##
+# @balloon:
+#
+# Request the balloon driver to change its balloon size.
+#
+# @value: the target size of the balloon in bytes
+#
+# Returns: Nothing on success
+# If the balloon driver is enabled but not functional because the KVM
+# kernel module cannot support it, KvmMissingCap
+# If no balloon device is present, DeviceNotActive
+#
+# Notes: This command just issues a request to the guest. When it returns,
+# the balloon size may not have changed. A guest can change the balloon
+# size independent of this command.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "balloon", "arguments": { "value": 536870912 } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'balloon', 'data': {'value': 'int'} }
+
+##
+# @human-monitor-command:
+#
+# Execute a command on the human monitor and return the output.
+#
+# @command-line: the command to execute in the human monitor
+#
+# @cpu-index: The CPU to use for commands that require an implicit CPU
+#
+# Returns: the output of the command as a string
+#
+# Since: 0.14.0
+#
+# Notes: This command only exists as a stop-gap. Its use is highly
+# discouraged. The semantics of this command are not
+# guaranteed: this means that command names, arguments and
+# responses can change or be removed at ANY time. Applications
+# that rely on long term stability guarantees should NOT
+# use this command.
+#
+# Known limitations:
+#
+# * This command is stateless, this means that commands that depend
+# on state information (such as getfd) might not work
+#
+# * Commands that prompt the user for data don't currently work
+#
+# Example:
+#
+# -> { "execute": "human-monitor-command",
+# "arguments": { "command-line": "info kvm" } }
+# <- { "return": "kvm support: enabled\r\n" }
+#
+##
+{ 'command': 'human-monitor-command',
+ 'data': {'command-line': 'str', '*cpu-index': 'int'},
+ 'returns': 'str' }
+
+##
+# @ObjectPropertyInfo:
+#
+# @name: the name of the property
+#
+# @type: the type of the property. This will typically come in one of four
+# forms:
+#
+# 1) A primitive type such as 'u8', 'u16', 'bool', 'str', or 'double'.
+# These types are mapped to the appropriate JSON type.
+#
+# 2) A child type in the form 'child<subtype>' where subtype is a qdev
+# device type name. Child properties create the composition tree.
+#
+# 3) A link type in the form 'link<subtype>' where subtype is a qdev
+# device type name. Link properties form the device model graph.
+#
+# Since: 1.2
+##
+{ 'struct': 'ObjectPropertyInfo',
+ 'data': { 'name': 'str', 'type': 'str' } }
+
+##
+# @qom-list:
+#
+# This command will list any properties of a object given a path in the object
+# model.
+#
+# @path: the path within the object model. See @qom-get for a description of
+# this parameter.
+#
+# Returns: a list of @ObjectPropertyInfo that describe the properties of the
+# object.
+#
+# Since: 1.2
+##
+{ 'command': 'qom-list',
+ 'data': { 'path': 'str' },
+ 'returns': [ 'ObjectPropertyInfo' ] }
+
+##
+# @qom-get:
+#
+# This command will get a property from a object model path and return the
+# value.
+#
+# @path: The path within the object model. There are two forms of supported
+# paths--absolute and partial paths.
+#
+# Absolute paths are derived from the root object and can follow child<>
+# or link<> properties. Since they can follow link<> properties, they
+# can be arbitrarily long. Absolute paths look like absolute filenames
+# and are prefixed with a leading slash.
+#
+# Partial paths look like relative filenames. They do not begin
+# with a prefix. The matching rules for partial paths are subtle but
+# designed to make specifying objects easy. At each level of the
+# composition tree, the partial path is matched as an absolute path.
+# The first match is not returned. At least two matches are searched
+# for. A successful result is only returned if only one match is
+# found. If more than one match is found, a flag is return to
+# indicate that the match was ambiguous.
+#
+# @property: The property name to read
+#
+# Returns: The property value. The type depends on the property
+# type. child<> and link<> properties are returned as #str
+# pathnames. All integer property types (u8, u16, etc) are
+# returned as #int.
+#
+# Since: 1.2
+##
+{ 'command': 'qom-get',
+ 'data': { 'path': 'str', 'property': 'str' },
+ 'returns': 'any' }
+
+##
+# @qom-set:
+#
+# This command will set a property from a object model path.
+#
+# @path: see @qom-get for a description of this parameter
+#
+# @property: the property name to set
+#
+# @value: a value who's type is appropriate for the property type. See
@qom-get
+# for a description of type mapping.
+#
+# Since: 1.2
+##
+{ 'command': 'qom-set',
+ 'data': { 'path': 'str', 'property': 'str', 'value': 'any' } }
+
+##
+# @change:
+#
+# This command is multiple commands multiplexed together.
+#
+# @device: This is normally the name of a block device but it may also be
'vnc'.
+# when it's 'vnc', then sub command depends on @target
+#
+# @target: If @device is a block device, then this is the new filename.
+# If @device is 'vnc', then if the value 'password' selects the vnc
+# change password command. Otherwise, this specifies a new server
URI
+# address to listen to for VNC connections.
+#
+# @arg: If @device is a block device, then this is an optional format to
open
+# the device with.
+# If @device is 'vnc' and @target is 'password', this is the new VNC
+# password to set. See change-vnc-password for additional notes.
+#
+# Returns: Nothing on success.
+# If @device is not a valid block device, DeviceNotFound
+#
+# Notes: This interface is deprecated, and it is strongly recommended that you
+# avoid using it. For changing block devices, use
+# blockdev-change-medium; for changing VNC parameters, use
+# change-vnc-password.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# 1. Change a removable medium
+#
+# -> { "execute": "change",
+# "arguments": { "device": "ide1-cd0",
+# "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } }
+# <- { "return": {} }
+#
+# 2. Change VNC password
+#
+# -> { "execute": "change",
+# "arguments": { "device": "vnc", "target": "password",
+# "arg": "foobar1" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'change',
+ 'data': {'device': 'str', 'target': 'str', '*arg': 'str'} }
+
+##
+# @ObjectTypeInfo:
+#
+# This structure describes a search result from @qom-list-types
+#
+# @name: the type name found in the search
+#
+# @abstract: the type is abstract and can't be directly instantiated.
+# Omitted if false. (since 2.10)
+#
+# @parent: Name of parent type, if any (since 2.10)
+#
+# Since: 1.1
+##
+{ 'struct': 'ObjectTypeInfo',
+ 'data': { 'name': 'str', '*abstract': 'bool', '*parent': 'str' } }
+
+##
+# @qom-list-types:
+#
+# This command will return a list of types given search parameters
+#
+# @implements: if specified, only return types that implement this type name
+#
+# @abstract: if true, include abstract types in the results
+#
+# Returns: a list of @ObjectTypeInfo or an empty list if no results are found
+#
+# Since: 1.1
+##
+{ 'command': 'qom-list-types',
+ 'data': { '*implements': 'str', '*abstract': 'bool' },
+ 'returns': [ 'ObjectTypeInfo' ] }
+
+##
+# @DevicePropertyInfo:
+#
+# Information about device properties.
+#
+# @name: the name of the property
+# @type: the typename of the property
+# @description: if specified, the description of the property.
+# (since 2.2)
+#
+# Since: 1.2
+##
+{ 'struct': 'DevicePropertyInfo',
+ 'data': { 'name': 'str', 'type': 'str', '*description': 'str' } }
+
+##
+# @device-list-properties:
+#
+# List properties associated with a device.
+#
+# @typename: the type name of a device
+#
+# Returns: a list of DevicePropertyInfo describing a devices properties
+#
+# Since: 1.2
+##
+{ 'command': 'device-list-properties',
+ 'data': { 'typename': 'str'},
+ 'returns': [ 'DevicePropertyInfo' ] }
+
+##
+# @xen-set-global-dirty-log:
+#
+# Enable or disable the global dirty log mode.
+#
+# @enable: true to enable, false to disable.
+#
+# Returns: nothing
+#
+# Since: 1.3
+#
+# Example:
+#
+# -> { "execute": "xen-set-global-dirty-log",
+# "arguments": { "enable": true } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } }
+
+##
+# @device_add:
+#
+# @driver: the name of the new device's driver
+#
+# @bus: the device's parent bus (device tree path)
+#
+# @id: the device's ID, must be unique
+#
+# Additional arguments depend on the type.
+#
+# Add a device.
+#
+# Notes:
+# 1. For detailed information about this command, please refer to the
+# 'docs/qdev-device-use.txt' file.
+#
+# 2. It's possible to list device properties by running QEMU with the
+# "-device DEVICE,help" command-line argument, where DEVICE is the
+# device's name
+#
+# Example:
+#
+# -> { "execute": "device_add",
+# "arguments": { "driver": "e1000", "id": "net1",
+# "bus": "pci.0",
+# "mac": "52:54:00:12:34:56" } }
+# <- { "return": {} }
+#
+# TODO: This command effectively bypasses QAPI completely due to its
+# "additional arguments" business. It shouldn't have been added to
+# the schema in this form. It should be qapified properly, or
+# replaced by a properly qapified command.
+#
+# Since: 0.13
+##
+{ 'command': 'device_add',
+ 'data': {'driver': 'str', '*bus': 'str', '*id': 'str'},
+ 'gen': false } # so we can get the additional arguments
+
+##
+# @device_del:
+#
+# Remove a device from a guest
+#
+# @id: the device's ID or QOM path
+#
+# Returns: Nothing on success
+# If @id is not a valid device, DeviceNotFound
+#
+# Notes: When this command completes, the device may not be removed from the
+# guest. Hot removal is an operation that requires guest cooperation.
+# This command merely requests that the guest begin the hot removal
+# process. Completion of the device removal process is signaled with a
+# DEVICE_DELETED event. Guest reset will automatically complete removal
+# for all devices.
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "device_del",
+# "arguments": { "id": "net1" } }
+# <- { "return": {} }
+#
+# -> { "execute": "device_del",
+# "arguments": { "id": "/machine/peripheral-anon/device[0]" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'device_del', 'data': {'id': 'str'} }
+
+##
+# @DEVICE_DELETED:
+#
+# Emitted whenever the device removal completion is acknowledged by the guest.
+# At this point, it's safe to reuse the specified device ID. Device removal can
+# be initiated by the guest or by HMP/QMP commands.
+#
+# @device: device name
+#
+# @path: device path
+#
+# Since: 1.5
+#
+# Example:
+#
+# <- { "event": "DEVICE_DELETED",
+# "data": { "device": "virtio-net-pci-0",
+# "path": "/machine/peripheral/virtio-net-pci-0" },
+# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
+#
+##
+{ 'event': 'DEVICE_DELETED',
+ 'data': { '*device': 'str', 'path': 'str' } }
+
+##
+# @DumpGuestMemoryFormat:
+#
+# An enumeration of guest-memory-dump's format.
+#
+# @elf: elf format
+#
+# @kdump-zlib: kdump-compressed format with zlib-compressed
+#
+# @kdump-lzo: kdump-compressed format with lzo-compressed
+#
+# @kdump-snappy: kdump-compressed format with snappy-compressed
+#
+# Since: 2.0
+##
+{ 'enum': 'DumpGuestMemoryFormat',
+ 'data': [ 'elf', 'kdump-zlib', 'kdump-lzo', 'kdump-snappy' ] }
+
+##
+# @dump-guest-memory:
+#
+# Dump guest's memory to vmcore. It is a synchronous operation that can take
+# very long depending on the amount of guest memory.
+#
+# @paging: if true, do paging to get guest's memory mapping. This allows
+# using gdb to process the core file.
+#
+# IMPORTANT: this option can make QEMU allocate several gigabytes
+# of RAM. This can happen for a large guest, or a
+# malicious guest pretending to be large.
+#
+# Also, paging=true has the following limitations:
+#
+# 1. The guest may be in a catastrophic state or can have corrupted
+# memory, which cannot be trusted
+# 2. The guest can be in real-mode even if paging is enabled. For
+# example, the guest uses ACPI to sleep, and ACPI sleep state
+# goes in real-mode
+# 3. Currently only supported on i386 and x86_64.
+#
+# @protocol: the filename or file descriptor of the vmcore. The supported
+# protocols are:
+#
+# 1. file: the protocol starts with "file:", and the following
+# string is the file's path.
+# 2. fd: the protocol starts with "fd:", and the following string
+# is the fd's name.
+#
+# @detach: if true, QMP will return immediately rather than
+# waiting for the dump to finish. The user can track progress
+# using "query-dump". (since 2.6).
+#
+# @begin: if specified, the starting physical address.
+#
+# @length: if specified, the memory size, in bytes. If you don't
+# want to dump all guest's memory, please specify the start @begin
+# and @length
+#
+# @format: if specified, the format of guest memory dump. But non-elf
+# format is conflict with paging and filter, ie. @paging, @begin and
+# @length is not allowed to be specified with non-elf @format at the
+# same time (since 2.0)
+#
+# Note: All boolean arguments default to false
+#
+# Returns: nothing on success
+#
+# Since: 1.2
+#
+# Example:
+#
+# -> { "execute": "dump-guest-memory",
+# "arguments": { "protocol": "fd:dump" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'dump-guest-memory',
+ 'data': { 'paging': 'bool', 'protocol': 'str', '*detach': 'bool',
+ '*begin': 'int', '*length': 'int',
+ '*format': 'DumpGuestMemoryFormat'} }
+
+##
+# @DumpStatus:
+#
+# Describe the status of a long-running background guest memory dump.
+#
+# @none: no dump-guest-memory has started yet.
+#
+# @active: there is one dump running in background.
+#
+# @completed: the last dump has finished successfully.
+#
+# @failed: the last dump has failed.
+#
+# Since: 2.6
+##
+{ 'enum': 'DumpStatus',
+ 'data': [ 'none', 'active', 'completed', 'failed' ] }
+
+##
+# @DumpQueryResult:
+#
+# The result format for 'query-dump'.
+#
+# @status: enum of @DumpStatus, which shows current dump status
+#
+# @completed: bytes written in latest dump (uncompressed)
+#
+# @total: total bytes to be written in latest dump (uncompressed)
+#
+# Since: 2.6
+##
+{ 'struct': 'DumpQueryResult',
+ 'data': { 'status': 'DumpStatus',
+ 'completed': 'int',
+ 'total': 'int' } }
+
+##
+# @query-dump:
+#
+# Query latest dump status.
+#
+# Returns: A @DumpStatus object showing the dump status.
+#
+# Since: 2.6
+#
+# Example:
+#
+# -> { "execute": "query-dump" }
+# <- { "return": { "status": "active", "completed": 1024000,
+# "total": 2048000 } }
+#
+##
+{ 'command': 'query-dump', 'returns': 'DumpQueryResult' }
+
+##
+# @DUMP_COMPLETED:
+#
+# Emitted when background dump has completed
+#
+# @result: DumpQueryResult type described in qapi-schema.json.
+#
+# @error: human-readable error string that provides
+# hint on why dump failed. Only presents on failure. The
+# user should not try to interpret the error string.
+#
+# Since: 2.6
+#
+# Example:
+#
+# { "event": "DUMP_COMPLETED",
+# "data": {"result": {"total": 1090650112, "status": "completed",
+# "completed": 1090650112} } }
+#
+##
+{ 'event': 'DUMP_COMPLETED' ,
+ 'data': { 'result': 'DumpQueryResult', '*error': 'str' } }
+
+##
+# @DumpGuestMemoryCapability:
+#
+# A list of the available formats for dump-guest-memory
+#
+# Since: 2.0
+##
+{ 'struct': 'DumpGuestMemoryCapability',
+ 'data': {
+ 'formats': ['DumpGuestMemoryFormat'] } }
+
+##
+# @query-dump-guest-memory-capability:
+#
+# Returns the available formats for dump-guest-memory
+#
+# Returns: A @DumpGuestMemoryCapability object listing available formats for
+# dump-guest-memory
+#
+# Since: 2.0
+#
+# Example:
+#
+# -> { "execute": "query-dump-guest-memory-capability" }
+# <- { "return": { "formats":
+# ["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
+#
+##
+{ 'command': 'query-dump-guest-memory-capability',
+ 'returns': 'DumpGuestMemoryCapability' }
+
+##
+# @dump-skeys:
+#
+# Dump guest's storage keys
+#
+# @filename: the path to the file to dump to
+#
+# This command is only supported on s390 architecture.
+#
+# Since: 2.5
+#
+# Example:
+#
+# -> { "execute": "dump-skeys",
+# "arguments": { "filename": "/tmp/skeys" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'dump-skeys',
+ 'data': { 'filename': 'str' } }
+
+##
+# @object-add:
+#
+# Create a QOM object.
+#
+# @qom-type: the class name for the object to be created
+#
+# @id: the name of the new object
+#
+# @props: a dictionary of properties to be passed to the backend
+#
+# Returns: Nothing on success
+# Error if @qom-type is not a valid class name
+#
+# Since: 2.0
+#
+# Example:
+#
+# -> { "execute": "object-add",
+# "arguments": { "qom-type": "rng-random", "id": "rng1",
+# "props": { "filename": "/dev/hwrng" } } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'object-add',
+ 'data': {'qom-type': 'str', 'id': 'str', '*props': 'any'} }
+
+##
+# @object-del:
+#
+# Remove a QOM object.
+#
+# @id: the name of the QOM object to remove
+#
+# Returns: Nothing on success
+# Error if @id is not a valid id for a QOM object
+#
+# Since: 2.0
+#
+# Example:
+#
+# -> { "execute": "object-del", "arguments": { "id": "rng1" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'object-del', 'data': {'id': 'str'} }
+
+##
+# @getfd:
+#
+# Receive a file descriptor via SCM rights and assign it a name
+#
+# @fdname: file descriptor name
+#
+# Returns: Nothing on success
+#
+# Since: 0.14.0
+#
+# Notes: If @fdname already exists, the file descriptor assigned to
+# it will be closed and replaced by the received file
+# descriptor.
+#
+# The 'closefd' command can be used to explicitly close the
+# file descriptor when it is no longer needed.
+#
+# Example:
+#
+# -> { "execute": "getfd", "arguments": { "fdname": "fd1" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'getfd', 'data': {'fdname': 'str'} }
+
+##
+# @closefd:
+#
+# Close a file descriptor previously passed via SCM rights
+#
+# @fdname: file descriptor name
+#
+# Returns: Nothing on success
+#
+# Since: 0.14.0
+#
+# Example:
+#
+# -> { "execute": "closefd", "arguments": { "fdname": "fd1" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'closefd', 'data': {'fdname': 'str'} }
+
+##
+# @MachineInfo:
+#
+# Information describing a machine.
+#
+# @name: the name of the machine
+#
+# @alias: an alias for the machine name
+#
+# @is-default: whether the machine is default
+#
+# @cpu-max: maximum number of CPUs supported by the machine type
+# (since 1.5.0)
+#
+# @hotpluggable-cpus: cpu hotplug via -device is supported (since 2.7.0)
+#
+# Since: 1.2.0
+##
+{ 'struct': 'MachineInfo',
+ 'data': { 'name': 'str', '*alias': 'str',
+ '*is-default': 'bool', 'cpu-max': 'int',
+ 'hotpluggable-cpus': 'bool'} }
+
+##
+# @query-machines:
+#
+# Return a list of supported machines
+#
+# Returns: a list of MachineInfo
+#
+# Since: 1.2.0
+##
+{ 'command': 'query-machines', 'returns': ['MachineInfo'] }
+
+##
+# @CpuDefinitionInfo:
+#
+# Virtual CPU definition.
+#
+# @name: the name of the CPU definition
+#
+# @migration-safe: whether a CPU definition can be safely used for
+# migration in combination with a QEMU compatibility machine
+# when migrating between different QMU versions and between
+# hosts with different sets of (hardware or software)
+# capabilities. If not provided, information is not available
+# and callers should not assume the CPU definition to be
+# migration-safe. (since 2.8)
+#
+# @static: whether a CPU definition is static and will not change depending on
+# QEMU version, machine type, machine options and accelerator options.
+# A static model is always migration-safe. (since 2.8)
+#
+# @unavailable-features: List of properties that prevent
+# the CPU model from running in the current
+# host. (since 2.8)
+# @typename: Type name that can be used as argument to @device-list-properties,
+# to introspect properties configurable using -cpu or -global.
+# (since 2.9)
+#
+# @unavailable-features is a list of QOM property names that
+# represent CPU model attributes that prevent the CPU from running.
+# If the QOM property is read-only, that means there's no known
+# way to make the CPU model run in the current host. Implementations
+# that choose not to provide specific information return the
+# property name "type".
+# If the property is read-write, it means that it MAY be possible
+# to run the CPU model in the current host if that property is
+# changed. Management software can use it as hints to suggest or
+# choose an alternative for the user, or just to generate meaningful
+# error messages explaining why the CPU model can't be used.
+# If @unavailable-features is an empty list, the CPU model is
+# runnable using the current host and machine-type.
+# If @unavailable-features is not present, runnability
+# information for the CPU is not available.
+#
+# Since: 1.2.0
+##
+{ 'struct': 'CpuDefinitionInfo',
+ 'data': { 'name': 'str', '*migration-safe': 'bool', 'static': 'bool',
+ '*unavailable-features': [ 'str' ], 'typename': 'str' } }
+
+##
+# @MemoryInfo:
+#
+# Actual memory information in bytes.
+#
+# @base-memory: size of "base" memory specified with command line
+# option -m.
+#
+# @plugged-memory: size of memory that can be hot-unplugged. This field
+# is omitted if target doesn't support memory hotplug
+# (i.e. CONFIG_MEM_HOTPLUG not defined on build time).
+#
+# Since: 2.11.0
+##
+{ 'struct': 'MemoryInfo',
+ 'data' : { 'base-memory': 'size', '*plugged-memory': 'size' } }
+
+##
+# @query-memory-size-summary:
+#
+# Return the amount of initially allocated and present hotpluggable (if
+# enabled) memory in bytes.
+#
+# Example:
+#
+# -> { "execute": "query-memory-size-summary" }
+# <- { "return": { "base-memory": 4294967296, "plugged-memory": 0 } }
+#
+# Since: 2.11.0
+##
+{ 'command': 'query-memory-size-summary', 'returns': 'MemoryInfo' }
+
+##
+# @query-cpu-definitions:
+#
+# Return a list of supported virtual CPU definitions
+#
+# Returns: a list of CpuDefInfo
+#
+# Since: 1.2.0
+##
+{ 'command': 'query-cpu-definitions', 'returns': ['CpuDefinitionInfo'] }
+
+##
+# @CpuModelInfo:
+#
+# Virtual CPU model.
+#
+# A CPU model consists of the name of a CPU definition, to which
+# delta changes are applied (e.g. features added/removed). Most magic values
+# that an architecture might require should be hidden behind the name.
+# However, if required, architectures can expose relevant properties.
+#
+# @name: the name of the CPU definition the model is based on
+# @props: a dictionary of QOM properties to be applied
+#
+# Since: 2.8.0
+##
+{ 'struct': 'CpuModelInfo',
+ 'data': { 'name': 'str',
+ '*props': 'any' } }
+
+##
+# @CpuModelExpansionType:
+#
+# An enumeration of CPU model expansion types.
+#
+# @static: Expand to a static CPU model, a combination of a static base
+# model name and property delta changes. As the static base model will
+# never change, the expanded CPU model will be the same, independent
of
+# independent of QEMU version, machine type, machine options, and
+# accelerator options. Therefore, the resulting model can be used by
+# tooling without having to specify a compatibility machine - e.g.
when
+# displaying the "host" model. static CPU models are migration-safe.
+#
+# @full: Expand all properties. The produced model is not guaranteed to be
+# migration-safe, but allows tooling to get an insight and work with
+# model details.
+#
+# Note: When a non-migration-safe CPU model is expanded in static mode, some
+# features enabled by the CPU model may be omitted, because they can't be
+# implemented by a static CPU model definition (e.g. cache info passthrough and
+# PMU passthrough in x86). If you need an accurate representation of the
+# features enabled by a non-migration-safe CPU model, use @full. If you need a
+# static representation that will keep ABI compatibility even when changing
QEMU
+# version or machine-type, use @static (but keep in mind that some features may
+# be omitted).
+#
+# Since: 2.8.0
+##
+{ 'enum': 'CpuModelExpansionType',
+ 'data': [ 'static', 'full' ] }
+
+
+##
+# @CpuModelExpansionInfo:
+#
+# The result of a cpu model expansion.
+#
+# @model: the expanded CpuModelInfo.
+#
+# Since: 2.8.0
+##
+{ 'struct': 'CpuModelExpansionInfo',
+ 'data': { 'model': 'CpuModelInfo' } }
+
+
+##
+# @query-cpu-model-expansion:
+#
+# Expands a given CPU model (or a combination of CPU model + additional
options)
+# to different granularities, allowing tooling to get an understanding what a
+# specific CPU model looks like in QEMU under a certain configuration.
+#
+# This interface can be used to query the "host" CPU model.
+#
+# The data returned by this command may be affected by:
+#
+# * QEMU version: CPU models may look different depending on the QEMU version.
+# (Except for CPU models reported as "static" in query-cpu-definitions.)
+# * machine-type: CPU model may look different depending on the machine-type.
+# (Except for CPU models reported as "static" in query-cpu-definitions.)
+# * machine options (including accelerator): in some architectures, CPU models
+# may look different depending on machine and accelerator options. (Except
for
+# CPU models reported as "static" in query-cpu-definitions.)
+# * "-cpu" arguments and global properties: arguments to the -cpu option and
+# global properties may affect expansion of CPU models. Using
+# query-cpu-model-expansion while using these is not advised.
+#
+# Some architectures may not support all expansion types. s390x supports
+# "full" and "static".
+#
+# Returns: a CpuModelExpansionInfo. Returns an error if expanding CPU models is
+# not supported, if the model cannot be expanded, if the model
contains
+# an unknown CPU definition name, unknown properties or properties
+# with a wrong type. Also returns an error if an expansion type is
+# not supported.
+#
+# Since: 2.8.0
+##
+{ 'command': 'query-cpu-model-expansion',
+ 'data': { 'type': 'CpuModelExpansionType',
+ 'model': 'CpuModelInfo' },
+ 'returns': 'CpuModelExpansionInfo' }
+
+##
+# @CpuModelCompareResult:
+#
+# An enumeration of CPU model comparison results. The result is usually
+# calculated using e.g. CPU features or CPU generations.
+#
+# @incompatible: If model A is incompatible to model B, model A is not
+# guaranteed to run where model B runs and the other way around.
+#
+# @identical: If model A is identical to model B, model A is guaranteed to run
+# where model B runs and the other way around.
+#
+# @superset: If model A is a superset of model B, model B is guaranteed to run
+# where model A runs. There are no guarantees about the other way.
+#
+# @subset: If model A is a subset of model B, model A is guaranteed to run
+# where model B runs. There are no guarantees about the other way.
+#
+# Since: 2.8.0
+##
+{ 'enum': 'CpuModelCompareResult',
+ 'data': [ 'incompatible', 'identical', 'superset', 'subset' ] }
+
+##
+# @CpuModelCompareInfo:
+#
+# The result of a CPU model comparison.
+#
+# @result: The result of the compare operation.
+# @responsible-properties: List of properties that led to the comparison result
+# not being identical.
+#
+# @responsible-properties is a list of QOM property names that led to
+# both CPUs not being detected as identical. For identical models, this
+# list is empty.
+# If a QOM property is read-only, that means there's no known way to make the
+# CPU models identical. If the special property name "type" is included, the
+# models are by definition not identical and cannot be made identical.
+#
+# Since: 2.8.0
+##
+{ 'struct': 'CpuModelCompareInfo',
+ 'data': {'result': 'CpuModelCompareResult',
+ 'responsible-properties': ['str']
+ }
+}
+
+##
+# @query-cpu-model-comparison:
+#
+# Compares two CPU models, returning how they compare in a specific
+# configuration. The results indicates how both models compare regarding
+# runnability. This result can be used by tooling to make decisions if a
+# certain CPU model will run in a certain configuration or if a compatible
+# CPU model has to be created by baselining.
+#
+# Usually, a CPU model is compared against the maximum possible CPU model
+# of a certain configuration (e.g. the "host" model for KVM). If that CPU
+# model is identical or a subset, it will run in that configuration.
+#
+# The result returned by this command may be affected by:
+#
+# * QEMU version: CPU models may look different depending on the QEMU version.
+# (Except for CPU models reported as "static" in query-cpu-definitions.)
+# * machine-type: CPU model may look different depending on the machine-type.
+# (Except for CPU models reported as "static" in query-cpu-definitions.)
+# * machine options (including accelerator): in some architectures, CPU models
+# may look different depending on machine and accelerator options. (Except
for
+# CPU models reported as "static" in query-cpu-definitions.)
+# * "-cpu" arguments and global properties: arguments to the -cpu option and
+# global properties may affect expansion of CPU models. Using
+# query-cpu-model-expansion while using these is not advised.
+#
+# Some architectures may not support comparing CPU models. s390x supports
+# comparing CPU models.
+#
+# Returns: a CpuModelBaselineInfo. Returns an error if comparing CPU models is
+# not supported, if a model cannot be used, if a model contains
+# an unknown cpu definition name, unknown properties or properties
+# with wrong types.
+#
+# Since: 2.8.0
+##
+{ 'command': 'query-cpu-model-comparison',
+ 'data': { 'modela': 'CpuModelInfo', 'modelb': 'CpuModelInfo' },
+ 'returns': 'CpuModelCompareInfo' }
+
+##
+# @CpuModelBaselineInfo:
+#
+# The result of a CPU model baseline.
+#
+# @model: the baselined CpuModelInfo.
+#
+# Since: 2.8.0
+##
+{ 'struct': 'CpuModelBaselineInfo',
+ 'data': { 'model': 'CpuModelInfo' } }
+
+##
+# @query-cpu-model-baseline:
+#
+# Baseline two CPU models, creating a compatible third model. The created
+# model will always be a static, migration-safe CPU model (see "static"
+# CPU model expansion for details).
+#
+# This interface can be used by tooling to create a compatible CPU model out
+# two CPU models. The created CPU model will be identical to or a subset of
+# both CPU models when comparing them. Therefore, the created CPU model is
+# guaranteed to run where the given CPU models run.
+#
+# The result returned by this command may be affected by:
+#
+# * QEMU version: CPU models may look different depending on the QEMU version.
+# (Except for CPU models reported as "static" in query-cpu-definitions.)
+# * machine-type: CPU model may look different depending on the machine-type.
+# (Except for CPU models reported as "static" in query-cpu-definitions.)
+# * machine options (including accelerator): in some architectures, CPU models
+# may look different depending on machine and accelerator options. (Except
for
+# CPU models reported as "static" in query-cpu-definitions.)
+# * "-cpu" arguments and global properties: arguments to the -cpu option and
+# global properties may affect expansion of CPU models. Using
+# query-cpu-model-expansion while using these is not advised.
+#
+# Some architectures may not support baselining CPU models. s390x supports
+# baselining CPU models.
+#
+# Returns: a CpuModelBaselineInfo. Returns an error if baselining CPU models is
+# not supported, if a model cannot be used, if a model contains
+# an unknown cpu definition name, unknown properties or properties
+# with wrong types.
+#
+# Since: 2.8.0
+##
+{ 'command': 'query-cpu-model-baseline',
+ 'data': { 'modela': 'CpuModelInfo',
+ 'modelb': 'CpuModelInfo' },
+ 'returns': 'CpuModelBaselineInfo' }
+
+##
+# @AddfdInfo:
+#
+# Information about a file descriptor that was added to an fd set.
+#
+# @fdset-id: The ID of the fd set that @fd was added to.
+#
+# @fd: The file descriptor that was received via SCM rights and
+# added to the fd set.
+#
+# Since: 1.2.0
+##
+{ 'struct': 'AddfdInfo', 'data': {'fdset-id': 'int', 'fd': 'int'} }
+
+##
+# @add-fd:
+#
+# Add a file descriptor, that was passed via SCM rights, to an fd set.
+#
+# @fdset-id: The ID of the fd set to add the file descriptor to.
+#
+# @opaque: A free-form string that can be used to describe the fd.
+#
+# Returns: @AddfdInfo on success
+#
+# If file descriptor was not received, FdNotSupplied
+#
+# If @fdset-id is a negative value, InvalidParameterValue
+#
+# Notes: The list of fd sets is shared by all monitor connections.
+#
+# If @fdset-id is not specified, a new fd set will be created.
+#
+# Since: 1.2.0
+#
+# Example:
+#
+# -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } }
+# <- { "return": { "fdset-id": 1, "fd": 3 } }
+#
+##
+{ 'command': 'add-fd', 'data': {'*fdset-id': 'int', '*opaque': 'str'},
+ 'returns': 'AddfdInfo' }
+
+##
+# @remove-fd:
+#
+# Remove a file descriptor from an fd set.
+#
+# @fdset-id: The ID of the fd set that the file descriptor belongs to.
+#
+# @fd: The file descriptor that is to be removed.
+#
+# Returns: Nothing on success
+# If @fdset-id or @fd is not found, FdNotFound
+#
+# Since: 1.2.0
+#
+# Notes: The list of fd sets is shared by all monitor connections.
+#
+# If @fd is not specified, all file descriptors in @fdset-id
+# will be removed.
+#
+# Example:
+#
+# -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'remove-fd', 'data': {'fdset-id': 'int', '*fd': 'int'} }
+
+##
+# @FdsetFdInfo:
+#
+# Information about a file descriptor that belongs to an fd set.
+#
+# @fd: The file descriptor value.
+#
+# @opaque: A free-form string that can be used to describe the fd.
+#
+# Since: 1.2.0
+##
+{ 'struct': 'FdsetFdInfo',
+ 'data': {'fd': 'int', '*opaque': 'str'} }
+
+##
+# @FdsetInfo:
+#
+# Information about an fd set.
+#
+# @fdset-id: The ID of the fd set.
+#
+# @fds: A list of file descriptors that belong to this fd set.
+#
+# Since: 1.2.0
+##
+{ 'struct': 'FdsetInfo',
+ 'data': {'fdset-id': 'int', 'fds': ['FdsetFdInfo']} }
+
+##
+# @query-fdsets:
+#
+# Return information describing all fd sets.
+#
+# Returns: A list of @FdsetInfo
+#
+# Since: 1.2.0
+#
+# Note: The list of fd sets is shared by all monitor connections.
+#
+# Example:
+#
+# -> { "execute": "query-fdsets" }
+# <- { "return": [
+# {
+# "fds": [
+# {
+# "fd": 30,
+# "opaque": "rdonly:/path/to/file"
+# },
+# {
+# "fd": 24,
+# "opaque": "rdwr:/path/to/file"
+# }
+# ],
+# "fdset-id": 1
+# },
+# {
+# "fds": [
+# {
+# "fd": 28
+# },
+# {
+# "fd": 29
+# }
+# ],
+# "fdset-id": 0
+# }
+# ]
+# }
+#
+##
+{ 'command': 'query-fdsets', 'returns': ['FdsetInfo'] }
+
+##
+# @TargetInfo:
+#
+# Information describing the QEMU target.
+#
+# @arch: the target architecture (eg "x86_64", "i386", etc)
+#
+# Since: 1.2.0
+##
+{ 'struct': 'TargetInfo',
+ 'data': { 'arch': 'str' } }
+
+##
+# @query-target:
+#
+# Return information about the target for this QEMU
+#
+# Returns: TargetInfo
+#
+# Since: 1.2.0
+##
+{ 'command': 'query-target', 'returns': 'TargetInfo' }
+
+##
+# @AcpiTableOptions:
+#
+# Specify an ACPI table on the command line to load.
+#
+# At most one of @file and @data can be specified. The list of files specified
+# by any one of them is loaded and concatenated in order. If both are omitted,
+# @data is implied.
+#
+# Other fields / optargs can be used to override fields of the generic ACPI
+# table header; refer to the ACPI specification 5.0, section 5.2.6 System
+# Description Table Header. If a header field is not overridden, then the
+# corresponding value from the concatenated blob is used (in case of @file), or
+# it is filled in with a hard-coded value (in case of @data).
+#
+# String fields are copied into the matching ACPI member from lowest address
+# upwards, and silently truncated / NUL-padded to length.
+#
+# @sig: table signature / identifier (4 bytes)
+#
+# @rev: table revision number (dependent on signature, 1 byte)
+#
+# @oem_id: OEM identifier (6 bytes)
+#
+# @oem_table_id: OEM table identifier (8 bytes)
+#
+# @oem_rev: OEM-supplied revision number (4 bytes)
+#
+# @asl_compiler_id: identifier of the utility that created the table
+# (4 bytes)
+#
+# @asl_compiler_rev: revision number of the utility that created the
+# table (4 bytes)
+#
+# @file: colon (:) separated list of pathnames to load and
+# concatenate as table data. The resultant binary blob is expected to
+# have an ACPI table header. At least one file is required. This field
+# excludes @data.
+#
+# @data: colon (:) separated list of pathnames to load and
+# concatenate as table data. The resultant binary blob must not have an
+# ACPI table header. At least one file is required. This field excludes
+# @file.
+#
+# Since: 1.5
+##
+{ 'struct': 'AcpiTableOptions',
+ 'data': {
+ '*sig': 'str',
+ '*rev': 'uint8',
+ '*oem_id': 'str',
+ '*oem_table_id': 'str',
+ '*oem_rev': 'uint32',
+ '*asl_compiler_id': 'str',
+ '*asl_compiler_rev': 'uint32',
+ '*file': 'str',
+ '*data': 'str' }}
+
+##
+# @CommandLineParameterType:
+#
+# Possible types for an option parameter.
+#
+# @string: accepts a character string
+#
+# @boolean: accepts "on" or "off"
+#
+# @number: accepts a number
+#
+# @size: accepts a number followed by an optional suffix (K)ilo,
+# (M)ega, (G)iga, (T)era
+#
+# Since: 1.5
+##
+{ 'enum': 'CommandLineParameterType',
+ 'data': ['string', 'boolean', 'number', 'size'] }
+
+##
+# @CommandLineParameterInfo:
+#
+# Details about a single parameter of a command line option.
+#
+# @name: parameter name
+#
+# @type: parameter @CommandLineParameterType
+#
+# @help: human readable text string, not suitable for parsing.
+#
+# @default: default value string (since 2.1)
+#
+# Since: 1.5
+##
+{ 'struct': 'CommandLineParameterInfo',
+ 'data': { 'name': 'str',
+ 'type': 'CommandLineParameterType',
+ '*help': 'str',
+ '*default': 'str' } }
+
+##
+# @CommandLineOptionInfo:
+#
+# Details about a command line option, including its list of parameter details
+#
+# @option: option name
+#
+# @parameters: an array of @CommandLineParameterInfo
+#
+# Since: 1.5
+##
+{ 'struct': 'CommandLineOptionInfo',
+ 'data': { 'option': 'str', 'parameters': ['CommandLineParameterInfo'] } }
+
+##
+# @query-command-line-options:
+#
+# Query command line option schema.
+#
+# @option: option name
+#
+# Returns: list of @CommandLineOptionInfo for all options (or for the given
+# @option). Returns an error if the given @option doesn't exist.
+#
+# Since: 1.5
+#
+# Example:
+#
+# -> { "execute": "query-command-line-options",
+# "arguments": { "option": "option-rom" } }
+# <- { "return": [
+# {
+# "parameters": [
+# {
+# "name": "romfile",
+# "type": "string"
+# },
+# {
+# "name": "bootindex",
+# "type": "number"
+# }
+# ],
+# "option": "option-rom"
+# }
+# ]
+# }
+#
+##
+{'command': 'query-command-line-options', 'data': { '*option': 'str' },
+ 'returns': ['CommandLineOptionInfo'] }
+
+##
+# @X86CPURegister32:
+#
+# A X86 32-bit register
+#
+# Since: 1.5
+##
+{ 'enum': 'X86CPURegister32',
+ 'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ] }
+
+##
+# @X86CPUFeatureWordInfo:
+#
+# Information about a X86 CPU feature word
+#
+# @cpuid-input-eax: Input EAX value for CPUID instruction for that feature word
+#
+# @cpuid-input-ecx: Input ECX value for CPUID instruction for that
+# feature word
+#
+# @cpuid-register: Output register containing the feature bits
+#
+# @features: value of output register, containing the feature bits
+#
+# Since: 1.5
+##
+{ 'struct': 'X86CPUFeatureWordInfo',
+ 'data': { 'cpuid-input-eax': 'int',
+ '*cpuid-input-ecx': 'int',
+ 'cpuid-register': 'X86CPURegister32',
+ 'features': 'int' } }
+
+##
+# @DummyForceArrays:
+#
+# Not used by QMP; hack to let us use X86CPUFeatureWordInfoList internally
+#
+# Since: 2.5
+##
+{ 'struct': 'DummyForceArrays',
+ 'data': { 'unused': ['X86CPUFeatureWordInfo'] } }
+
+
+##
+# @NumaOptionsType:
+#
+# @node: NUMA nodes configuration
+#
+# @dist: NUMA distance configuration (since 2.10)
+#
+# @cpu: property based CPU(s) to node mapping (Since: 2.10)
+#
+# Since: 2.1
+##
+{ 'enum': 'NumaOptionsType',
+ 'data': [ 'node', 'dist', 'cpu' ] }
+
+##
+# @NumaOptions:
+#
+# A discriminated record of NUMA options. (for OptsVisitor)
+#
+# Since: 2.1
+##
+{ 'union': 'NumaOptions',
+ 'base': { 'type': 'NumaOptionsType' },
+ 'discriminator': 'type',
+ 'data': {
+ 'node': 'NumaNodeOptions',
+ 'dist': 'NumaDistOptions',
+ 'cpu': 'NumaCpuOptions' }}
+
+##
+# @NumaNodeOptions:
+#
+# Create a guest NUMA node. (for OptsVisitor)
+#
+# @nodeid: NUMA node ID (increase by 1 from 0 if omitted)
+#
+# @cpus: VCPUs belonging to this node (assign VCPUS round-robin
+# if omitted)
+#
+# @mem: memory size of this node; mutually exclusive with @memdev.
+# Equally divide total memory among nodes if both @mem and @memdev are
+# omitted.
+#
+# @memdev: memory backend object. If specified for one node,
+# it must be specified for all nodes.
+#
+# Since: 2.1
+##
+{ 'struct': 'NumaNodeOptions',
+ 'data': {
+ '*nodeid': 'uint16',
+ '*cpus': ['uint16'],
+ '*mem': 'size',
+ '*memdev': 'str' }}
+
+##
+# @NumaDistOptions:
+#
+# Set the distance between 2 NUMA nodes.
+#
+# @src: source NUMA node.
+#
+# @dst: destination NUMA node.
+#
+# @val: NUMA distance from source node to destination node.
+# When a node is unreachable from another node, set the distance
+# between them to 255.
+#
+# Since: 2.10
+##
+{ 'struct': 'NumaDistOptions',
+ 'data': {
+ 'src': 'uint16',
+ 'dst': 'uint16',
+ 'val': 'uint8' }}
+
+##
+# @NumaCpuOptions:
+#
+# Option "-numa cpu" overrides default cpu to node mapping.
+# It accepts the same set of cpu properties as returned by
+# query-hotpluggable-cpus[].props, where node-id could be used to
+# override default node mapping.
+#
+# Since: 2.10
+##
+{ 'struct': 'NumaCpuOptions',
+ 'base': 'CpuInstanceProperties',
+ 'data' : {} }
+
+##
+# @HostMemPolicy:
+#
+# Host memory policy types
+#
+# @default: restore default policy, remove any nondefault policy
+#
+# @preferred: set the preferred host nodes for allocation
+#
+# @bind: a strict policy that restricts memory allocation to the
+# host nodes specified
+#
+# @interleave: memory allocations are interleaved across the set
+# of host nodes specified
+#
+# Since: 2.1
+##
+{ 'enum': 'HostMemPolicy',
+ 'data': [ 'default', 'preferred', 'bind', 'interleave' ] }
+
+##
+# @Memdev:
+#
+# Information about memory backend
+#
+# @id: backend's ID if backend has 'id' property (since 2.9)
+#
+# @size: memory backend size
+#
+# @merge: enables or disables memory merge support
+#
+# @dump: includes memory backend's memory in a core dump or not
+#
+# @prealloc: enables or disables memory preallocation
+#
+# @host-nodes: host nodes for its memory policy
+#
+# @policy: memory policy of memory backend
+#
+# Since: 2.1
+##
+{ 'struct': 'Memdev',
+ 'data': {
+ '*id': 'str',
+ 'size': 'size',
+ 'merge': 'bool',
+ 'dump': 'bool',
+ 'prealloc': 'bool',
+ 'host-nodes': ['uint16'],
+ 'policy': 'HostMemPolicy' }}
+
+##
+# @query-memdev:
+#
+# Returns information for all memory backends.
+#
+# Returns: a list of @Memdev.
+#
+# Since: 2.1
+#
+# Example:
+#
+# -> { "execute": "query-memdev" }
+# <- { "return": [
+# {
+# "id": "mem1",
+# "size": 536870912,
+# "merge": false,
+# "dump": true,
+# "prealloc": false,
+# "host-nodes": [0, 1],
+# "policy": "bind"
+# },
+# {
+# "size": 536870912,
+# "merge": false,
+# "dump": true,
+# "prealloc": true,
+# "host-nodes": [2, 3],
+# "policy": "preferred"
+# }
+# ]
+# }
+#
+##
+{ 'command': 'query-memdev', 'returns': ['Memdev'] }
+
+##
+# @PCDIMMDeviceInfo:
+#
+# PCDIMMDevice state information
+#
+# @id: device's ID
+#
+# @addr: physical address, where device is mapped
+#
+# @size: size of memory that the device provides
+#
+# @slot: slot number at which device is plugged in
+#
+# @node: NUMA node number where device is plugged in
+#
+# @memdev: memory backend linked with device
+#
+# @hotplugged: true if device was hotplugged
+#
+# @hotpluggable: true if device if could be added/removed while machine is
running
+#
+# Since: 2.1
+##
+{ 'struct': 'PCDIMMDeviceInfo',
+ 'data': { '*id': 'str',
+ 'addr': 'int',
+ 'size': 'int',
+ 'slot': 'int',
+ 'node': 'int',
+ 'memdev': 'str',
+ 'hotplugged': 'bool',
+ 'hotpluggable': 'bool'
+ }
+}
+
+##
+# @MemoryDeviceInfo:
+#
+# Union containing information about a memory device
+#
+# Since: 2.1
+##
+{ 'union': 'MemoryDeviceInfo', 'data': {'dimm': 'PCDIMMDeviceInfo'} }
+
+##
+# @query-memory-devices:
+#
+# Lists available memory devices and their state
+#
+# Since: 2.1
+#
+# Example:
+#
+# -> { "execute": "query-memory-devices" }
+# <- { "return": [ { "data":
+# { "addr": 5368709120,
+# "hotpluggable": true,
+# "hotplugged": true,
+# "id": "d1",
+# "memdev": "/objects/memX",
+# "node": 0,
+# "size": 1073741824,
+# "slot": 0},
+# "type": "dimm"
+# } ] }
+#
+##
+{ 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] }
+
+##
+# @MEM_UNPLUG_ERROR:
+#
+# Emitted when memory hot unplug error occurs.
+#
+# @device: device name
+#
+# @msg: Informative message
+#
+# Since: 2.4
+#
+# Example:
+#
+# <- { "event": "MEM_UNPLUG_ERROR"
+# "data": { "device": "dimm1",
+# "msg": "acpi: device unplug for unsupported device"
+# },
+# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
+#
+##
+{ 'event': 'MEM_UNPLUG_ERROR',
+ 'data': { 'device': 'str', 'msg': 'str' } }
+
+##
+# @ACPISlotType:
+#
+# @DIMM: memory slot
+# @CPU: logical CPU slot (since 2.7)
+##
+{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] }
+
+##
+# @ACPIOSTInfo:
+#
+# OSPM Status Indication for a device
+# For description of possible values of @source and @status fields
+# see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec.
+#
+# @device: device ID associated with slot
+#
+# @slot: slot ID, unique per slot of a given @slot-type
+#
+# @slot-type: type of the slot
+#
+# @source: an integer containing the source event
+#
+# @status: an integer containing the status code
+#
+# Since: 2.1
+##
+{ 'struct': 'ACPIOSTInfo',
+ 'data' : { '*device': 'str',
+ 'slot': 'str',
+ 'slot-type': 'ACPISlotType',
+ 'source': 'int',
+ 'status': 'int' } }
+
+##
+# @query-acpi-ospm-status:
+#
+# Return a list of ACPIOSTInfo for devices that support status
+# reporting via ACPI _OST method.
+#
+# Since: 2.1
+#
+# Example:
+#
+# -> { "execute": "query-acpi-ospm-status" }
+# <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM",
"source": 1, "status": 0},
+# { "slot": "1", "slot-type": "DIMM", "source": 0, "status":
0},
+# { "slot": "2", "slot-type": "DIMM", "source": 0, "status":
0},
+# { "slot": "3", "slot-type": "DIMM", "source": 0, "status":
0}
+# ]}
+#
+##
+{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] }
+
+##
+# @ACPI_DEVICE_OST:
+#
+# Emitted when guest executes ACPI _OST method.
+#
+# @info: ACPIOSTInfo type as described in qapi-schema.json
+#
+# Since: 2.1
+#
+# Example:
+#
+# <- { "event": "ACPI_DEVICE_OST",
+# "data": { "device": "d1", "slot": "0",
+# "slot-type": "DIMM", "source": 1, "status": 0 } }
+#
+##
+{ 'event': 'ACPI_DEVICE_OST',
+ 'data': { 'info': 'ACPIOSTInfo' } }
+
+##
+# @rtc-reset-reinjection:
+#
+# This command will reset the RTC interrupt reinjection backlog.
+# Can be used if another mechanism to synchronize guest time
+# is in effect, for example QEMU guest agent's guest-set-time
+# command.
+#
+# Since: 2.1
+#
+# Example:
+#
+# -> { "execute": "rtc-reset-reinjection" }
+# <- { "return": {} }
+#
+##
+{ 'command': 'rtc-reset-reinjection' }
+
+##
+# @RTC_CHANGE:
+#
+# Emitted when the guest changes the RTC time.
+#
+# @offset: offset between base RTC clock (as specified by -rtc base), and
+# new RTC clock value
+#
+# Note: This event is rate-limited.
+#
+# Since: 0.13.0
+#
+# Example:
+#
+# <- { "event": "RTC_CHANGE",
+# "data": { "offset": 78 },
+# "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
+#
+##
+{ 'event': 'RTC_CHANGE',
+ 'data': { 'offset': 'int' } }
+
+##
+# @ReplayMode:
+#
+# Mode of the replay subsystem.
+#
+# @none: normal execution mode. Replay or record are not enabled.
+#
+# @record: record mode. All non-deterministic data is written into the
+# replay log.
+#
+# @play: replay mode. Non-deterministic data required for system execution
+# is read from the log.
+#
+# Since: 2.5
+##
+{ 'enum': 'ReplayMode',
+ 'data': [ 'none', 'record', 'play' ] }
+
+##
+# @xen-load-devices-state:
+#
+# Load the state of all devices from file. The RAM and the block devices
+# of the VM are not loaded by this command.
+#
+# @filename: the file to load the state of the devices from as binary
+# data. See xen-save-devices-state.txt for a description of the binary
+# format.
+#
+# Since: 2.7
+#
+# Example:
+#
+# -> { "execute": "xen-load-devices-state",
+# "arguments": { "filename": "/tmp/resume" } }
+# <- { "return": {} }
+#
+##
+{ 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} }
+
+##
+# @GICCapability:
+#
+# The struct describes capability for a specific GIC (Generic
+# Interrupt Controller) version. These bits are not only decided by
+# QEMU/KVM software version, but also decided by the hardware that
+# the program is running upon.
+#
+# @version: version of GIC to be described. Currently, only 2 and 3
+# are supported.
+#
+# @emulated: whether current QEMU/hardware supports emulated GIC
+# device in user space.
+#
+# @kernel: whether current QEMU/hardware supports hardware
+# accelerated GIC device in kernel.
+#
+# Since: 2.6
+##
+{ 'struct': 'GICCapability',
+ 'data': { 'version': 'int',
+ 'emulated': 'bool',
+ 'kernel': 'bool' } }
+
+##
+# @query-gic-capabilities:
+#
+# This command is ARM-only. It will return a list of GICCapability
+# objects that describe its capability bits.
+#
+# Returns: a list of GICCapability objects.
+#
+# Since: 2.6
+#
+# Example:
+#
+# -> { "execute": "query-gic-capabilities" }
+# <- { "return": [{ "version": 2, "emulated": true, "kernel": false },
+# { "version": 3, "emulated": false, "kernel": true } ] }
+#
+##
+{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'] }
+
+##
+# @CpuInstanceProperties:
+#
+# List of properties to be used for hotplugging a CPU instance,
+# it should be passed by management with device_add command when
+# a CPU is being hotplugged.
+#
+# @node-id: NUMA node ID the CPU belongs to
+# @socket-id: socket number within node/board the CPU belongs to
+# @core-id: core number within socket the CPU belongs to
+# @thread-id: thread number within core the CPU belongs to
+#
+# Note: currently there are 4 properties that could be present
+# but management should be prepared to pass through other
+# properties with device_add command to allow for future
+# interface extension. This also requires the filed names to be kept in
+# sync with the properties passed to -device/device_add.
+#
+# Since: 2.7
+##
+{ 'struct': 'CpuInstanceProperties',
+ 'data': { '*node-id': 'int',
+ '*socket-id': 'int',
+ '*core-id': 'int',
+ '*thread-id': 'int'
+ }
+}
+
+##
+# @HotpluggableCPU:
+#
+# @type: CPU object type for usage with device_add command
+# @props: list of properties to be used for hotplugging CPU
+# @vcpus-count: number of logical VCPU threads @HotpluggableCPU provides
+# @qom-path: link to existing CPU object if CPU is present or
+# omitted if CPU is not present.
+#
+# Since: 2.7
+##
+{ 'struct': 'HotpluggableCPU',
+ 'data': { 'type': 'str',
+ 'vcpus-count': 'int',
+ 'props': 'CpuInstanceProperties',
+ '*qom-path': 'str'
+ }
+}
+
+##
+# @query-hotpluggable-cpus:
+#
+# Returns: a list of HotpluggableCPU objects.
+#
+# Since: 2.7
+#
+# Example:
+#
+# For pseries machine type started with -smp 2,cores=2,maxcpus=4 -cpu POWER8:
+#
+# -> { "execute": "query-hotpluggable-cpus" }
+# <- {"return": [
+# { "props": { "core": 8 }, "type": "POWER8-spapr-cpu-core",
+# "vcpus-count": 1 },
+# { "props": { "core": 0 }, "type": "POWER8-spapr-cpu-core",
+# "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]"}
+# ]}'
+#
+# For pc machine type started with -smp 1,maxcpus=2:
+#
+# -> { "execute": "query-hotpluggable-cpus" }
+# <- {"return": [
+# {
+# "type": "qemu64-x86_64-cpu", "vcpus-count": 1,
+# "props": {"core-id": 0, "socket-id": 1, "thread-id": 0}
+# },
+# {
+# "qom-path": "/machine/unattached/device[0]",
+# "type": "qemu64-x86_64-cpu", "vcpus-count": 1,
+# "props": {"core-id": 0, "socket-id": 0, "thread-id": 0}
+# }
+# ]}
+#
+# For s390x-virtio-ccw machine type started with -smp 1,maxcpus=2 -cpu qemu
+# (Since: 2.11):
+#
+# -> { "execute": "query-hotpluggable-cpus" }
+# <- {"return": [
+# {
+# "type": "qemu-s390x-cpu", "vcpus-count": 1,
+# "props": { "core-id": 1 }
+# },
+# {
+# "qom-path": "/machine/unattached/device[0]",
+# "type": "qemu-s390x-cpu", "vcpus-count": 1,
+# "props": { "core-id": 0 }
+# }
+# ]}
+#
+##
+{ 'command': 'query-hotpluggable-cpus', 'returns': ['HotpluggableCPU'] }
+
+##
+# @GuidInfo:
+#
+# GUID information.
+#
+# @guid: the globally unique identifier
+#
+# Since: 2.9
+##
+{ 'struct': 'GuidInfo', 'data': {'guid': 'str'} }
+
+##
+# @query-vm-generation-id:
+#
+# Show Virtual Machine Generation ID
+#
+# Since: 2.9
+##
+{ 'command': 'query-vm-generation-id', 'returns': 'GuidInfo' }
diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
index 40c2c8acb1a..b2ad8e9faa9 100644
--- a/include/hw/qdev-properties.h
+++ b/include/hw/qdev-properties.h
@@ -1,7 +1,8 @@
#ifndef QEMU_QDEV_PROPERTIES_H
#define QEMU_QDEV_PROPERTIES_H
-#include "qapi-types.h"
+#include "qapi/qapi-types-block.h"
+#include "qapi/qapi-types-misc.h"
#include "hw/qdev-core.h"
/*** qdev-properties.c ***/
diff --git a/include/monitor/monitor.h b/include/monitor/monitor.h
index 50f7cea057d..d1024d4bdc3 100644
--- a/include/monitor/monitor.h
+++ b/include/monitor/monitor.h
@@ -3,7 +3,7 @@
#include "qemu-common.h"
#include "block/block.h"
-#include "qapi-types.h"
+#include "qapi/qapi-types-misc.h"
#include "qemu/readline.h"
extern Monitor *cur_mon;
diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
index d40d882e383..cecd494159d 100644
--- a/include/sysemu/arch_init.h
+++ b/include/sysemu/arch_init.h
@@ -1,7 +1,7 @@
#ifndef QEMU_ARCH_INIT_H
#define QEMU_ARCH_INIT_H
-#include "qapi-types.h"
+#include "qapi/qapi-types-misc.h"
enum {
QEMU_ARCH_ALL = -1,
diff --git a/include/sysemu/balloon.h b/include/sysemu/balloon.h
index af49e19c787..66543ae8f4b 100644
--- a/include/sysemu/balloon.h
+++ b/include/sysemu/balloon.h
@@ -14,7 +14,7 @@
#ifndef QEMU_BALLOON_H
#define QEMU_BALLOON_H
-#include "qapi-types.h"
+#include "qapi/qapi-types-misc.h"
typedef void (QEMUBalloonEvent)(void *opaque, ram_addr_t target);
typedef void (QEMUBalloonStatus)(void *opaque, BalloonInfo *info);
diff --git a/include/sysemu/dump.h b/include/sysemu/dump.h
index 2424e314255..d824bc0941a 100644
--- a/include/sysemu/dump.h
+++ b/include/sysemu/dump.h
@@ -14,7 +14,7 @@
#ifndef DUMP_H
#define DUMP_H
-#include "qapi-types.h"
+#include "qapi/qapi-types-misc.h"
#define MAKEDUMPFILE_SIGNATURE "makedumpfile"
#define MAX_SIZE_MDF_HEADER (4096) /* max size of makedumpfile_header
*/
diff --git a/include/sysemu/hostmem.h b/include/sysemu/hostmem.h
index e1efaf04ac7..47bc9846aca 100644
--- a/include/sysemu/hostmem.h
+++ b/include/sysemu/hostmem.h
@@ -14,7 +14,7 @@
#define SYSEMU_HOSTMEM_H
#include "sysemu/sysemu.h" /* for MAX_NODES */
-#include "qapi-types.h"
+#include "qapi/qapi-types-misc.h"
#include "qom/object.h"
#include "exec/memory.h"
#include "qemu/bitmap.h"
diff --git a/include/sysemu/replay.h b/include/sysemu/replay.h
index fb533ed9b6a..c0204e641c3 100644
--- a/include/sysemu/replay.h
+++ b/include/sysemu/replay.h
@@ -13,7 +13,8 @@
*/
#include "sysemu.h"
-#include "qapi-types.h"
+#include "qapi/qapi-types-misc.h"
+#include "qapi/qapi-types-ui.h"
/* replay clock kinds */
enum ReplayClockKind {
diff --git a/vl.c b/vl.c
index 24d855a373c..cdba3a39975 100644
--- a/vl.c
+++ b/vl.c
@@ -100,7 +100,6 @@ int main(int argc, char **argv)
#include "qemu/option.h"
#include "qemu/config-file.h"
#include "qemu-options.h"
-#include "qmp-commands.h"
#include "qemu/main-loop.h"
#ifdef CONFIG_VIRTFS
#include "fsdev/qemu-fsdev.h"
@@ -126,6 +125,9 @@ int main(int argc, char **argv)
#include "sysemu/replay.h"
#include "qapi/qapi-events-run-state.h"
#include "qapi/qapi-visit-block-core.h"
+#include "qapi/qapi-commands-block-core.h"
+#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-commands-run-state.h"
#include "qapi/qmp/qerror.h"
#include "sysemu/iothread.h"
diff --git a/arch_init.c b/arch_init.c
index 4c36f2b076d..46d03f550da 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -28,9 +28,9 @@
#include "sysemu/arch_init.h"
#include "hw/pci/pci.h"
#include "hw/audio/soundhw.h"
+#include "qapi/qapi-commands-misc.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
-#include "qmp-commands.h"
#include "hw/acpi/acpi.h"
#include "qemu/help_option.h"
diff --git a/balloon.c b/balloon.c
index d8dd6fe7738..6bf0a968137 100644
--- a/balloon.c
+++ b/balloon.c
@@ -30,8 +30,8 @@
#include "sysemu/kvm.h"
#include "sysemu/balloon.h"
#include "trace-root.h"
-#include "qmp-commands.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qapi/qmp/qerror.h"
static QEMUBalloonEvent *balloon_event_fn;
diff --git a/block/iscsi.c b/block/iscsi.c
index 421983dd6ff..d2b320ea41e 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -37,8 +37,8 @@
#include "qemu/iov.h"
#include "qemu/option.h"
#include "qemu/uuid.h"
-#include "qmp-commands.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qstring.h"
#include "crypto/secret.h"
diff --git a/cpus.c b/cpus.c
index ac5b21ef076..4f5f88edba9 100644
--- a/cpus.c
+++ b/cpus.c
@@ -27,6 +27,7 @@
#include "cpu.h"
#include "monitor/monitor.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qapi/qapi-events-run-state.h"
#include "qapi/qmp/qerror.h"
#include "qemu/error-report.h"
@@ -39,7 +40,6 @@
#include "sysemu/hax.h"
#include "sysemu/hvf.h"
#include "sysemu/whpx.h"
-#include "qmp-commands.h"
#include "exec/exec-all.h"
#include "qemu/thread.h"
diff --git a/dump.c b/dump.c
index 7b13baa4136..097e60b2b36 100644
--- a/dump.c
+++ b/dump.c
@@ -23,9 +23,9 @@
#include "sysemu/memory_mapping.h"
#include "sysemu/cpus.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-events-misc.h"
#include "qapi/qmp/qerror.h"
-#include "qmp-commands.h"
-#include "qapi-event.h"
#include "qemu/error-report.h"
#include "hw/misc/vmcoreinfo.h"
diff --git a/hmp.c b/hmp.c
index cc35a787f94..8ea227dac4e 100644
--- a/hmp.c
+++ b/hmp.c
@@ -23,13 +23,21 @@
#include "qemu/config-file.h"
#include "qemu/option.h"
#include "qemu/timer.h"
-#include "qmp-commands.h"
#include "qemu/sockets.h"
#include "monitor/monitor.h"
#include "monitor/qdev.h"
#include "qapi/error.h"
#include "qapi/opts-visitor.h"
#include "qapi-builtin-visit.h"
+#include "qapi/qapi-commands-block.h"
+#include "qapi/qapi-commands-char.h"
+#include "qapi/qapi-commands-migration.h"
+#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-commands-net.h"
+#include "qapi/qapi-commands-rocker.h"
+#include "qapi/qapi-commands-run-state.h"
+#include "qapi/qapi-commands-tpm.h"
+#include "qapi/qapi-commands-ui.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qerror.h"
#include "qapi/string-input-visitor.h"
diff --git a/hw/acpi/core.c b/hw/acpi/core.c
index 5d4ce925dcd..b8d39012cda 100644
--- a/hw/acpi/core.c
+++ b/hw/acpi/core.c
@@ -28,7 +28,7 @@
#include "qapi/error.h"
#include "qapi/opts-visitor.h"
#include "qapi/qapi-events-run-state.h"
-#include "qapi-visit.h"
+#include "qapi/qapi-visit-misc.h"
#include "qemu/error-report.h"
#include "qemu/option.h"
diff --git a/hw/acpi/cpu.c b/hw/acpi/cpu.c
index a233fe17cf2..5ae595ecbe6 100644
--- a/hw/acpi/cpu.c
+++ b/hw/acpi/cpu.c
@@ -2,7 +2,7 @@
#include "hw/boards.h"
#include "hw/acpi/cpu.h"
#include "qapi/error.h"
-#include "qapi-event.h"
+#include "qapi/qapi-events-misc.h"
#include "trace.h"
#include "sysemu/numa.h"
diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index ea958a0e997..0ff1712c4cd 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -5,8 +5,8 @@
#include "hw/boards.h"
#include "hw/qdev-core.h"
#include "trace.h"
-#include "qapi-event.h"
#include "qapi/error.h"
+#include "qapi/qapi-events-misc.h"
#define MEMORY_SLOTS_NUMBER "MDNR"
#define MEMORY_HOTPLUG_IO_REGION "HPMR"
diff --git a/hw/acpi/vmgenid.c b/hw/acpi/vmgenid.c
index f25eafc0eca..d78b579a201 100644
--- a/hw/acpi/vmgenid.c
+++ b/hw/acpi/vmgenid.c
@@ -12,7 +12,7 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
-#include "qmp-commands.h"
+#include "qapi/qapi-commands-misc.h"
#include "hw/acpi/acpi.h"
#include "hw/acpi/aml-build.h"
#include "hw/acpi/vmgenid.h"
diff --git a/hw/core/qdev.c b/hw/core/qdev.c
index 7ed1f431f02..7635cf55fd0 100644
--- a/hw/core/qdev.c
+++ b/hw/core/qdev.c
@@ -29,6 +29,7 @@
#include "hw/qdev.h"
#include "sysemu/sysemu.h"
#include "qapi/error.h"
+#include "qapi/qapi-events-misc.h"
#include "qapi/qmp/qerror.h"
#include "qapi/visitor.h"
#include "qemu/error-report.h"
@@ -36,7 +37,6 @@
#include "hw/hotplug.h"
#include "hw/boards.h"
#include "hw/sysbus.h"
-#include "qapi-event.h"
bool qdev_hotplug = false;
static bool qdev_hot_added = false;
diff --git a/hw/i386/xen/xen-hvm.c b/hw/i386/xen/xen-hvm.c
index bfdbe555801..f24b7d4923b 100644
--- a/hw/i386/xen/xen-hvm.c
+++ b/hw/i386/xen/xen-hvm.c
@@ -16,8 +16,8 @@
#include "hw/i386/apic-msidef.h"
#include "hw/xen/xen_common.h"
#include "hw/xen/xen_backend.h"
-#include "qmp-commands.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qemu/error-report.h"
#include "qemu/range.h"
#include "sysemu/xen-mapcache.h"
diff --git a/hw/ipmi/ipmi.c b/hw/ipmi/ipmi.c
index adbbf6e4a63..9be281fd879 100644
--- a/hw/ipmi/ipmi.c
+++ b/hw/ipmi/ipmi.c
@@ -26,9 +26,9 @@
#include "hw/hw.h"
#include "hw/ipmi/ipmi.h"
#include "sysemu/sysemu.h"
-#include "qmp-commands.h"
#include "qom/object_interfaces.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qapi/visitor.h"
static uint32_t ipmi_current_uuid = 1;
diff --git a/hw/pci/pci-stub.c b/hw/pci/pci-stub.c
index 74ce7316da1..b941a0e842e 100644
--- a/hw/pci/pci-stub.c
+++ b/hw/pci/pci-stub.c
@@ -22,9 +22,9 @@
#include "sysemu/sysemu.h"
#include "monitor/monitor.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qapi/qmp/qerror.h"
#include "hw/pci/pci.h"
-#include "qmp-commands.h"
#include "hw/pci/msi.h"
bool msi_nonbroken;
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index e006b6ac715..2174c254ebf 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -34,7 +34,6 @@
#include "hw/loader.h"
#include "qemu/error-report.h"
#include "qemu/range.h"
-#include "qmp-commands.h"
#include "trace.h"
#include "hw/pci/msi.h"
#include "hw/pci/msix.h"
@@ -42,6 +41,7 @@
#include "hw/hotplug.h"
#include "hw/boards.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qemu/cutils.h"
//#define DEBUG_PCI
diff --git a/hw/ppc/spapr_rtc.c b/hw/ppc/spapr_rtc.c
index cfdb274bfdf..a37360537e0 100644
--- a/hw/ppc/spapr_rtc.c
+++ b/hw/ppc/spapr_rtc.c
@@ -30,8 +30,8 @@
#include "qemu/timer.h"
#include "sysemu/sysemu.h"
#include "hw/ppc/spapr.h"
-#include "qapi-event.h"
#include "qapi/error.h"
+#include "qapi/qapi-events-misc.h"
#include "qemu/cutils.h"
void spapr_rtc_read(sPAPRRTCState *rtc, struct tm *tm, uint32_t *ns)
diff --git a/hw/s390x/s390-skeys.c b/hw/s390x/s390-skeys.c
index bdb6c18a0f9..76241c240e1 100644
--- a/hw/s390x/s390-skeys.c
+++ b/hw/s390x/s390-skeys.c
@@ -11,9 +11,9 @@
#include "qemu/osdep.h"
#include "hw/boards.h"
-#include "qmp-commands.h"
#include "hw/s390x/storage-keys.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qapi/qmp/qdict.h"
#include "qemu/error-report.h"
#include "sysemu/kvm.h"
diff --git a/hw/timer/mc146818rtc.c b/hw/timer/mc146818rtc.c
index 9d93a16e0fc..6f1f723b1f0 100644
--- a/hw/timer/mc146818rtc.c
+++ b/hw/timer/mc146818rtc.c
@@ -31,9 +31,9 @@
#include "sysemu/replay.h"
#include "hw/timer/mc146818rtc.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-events-misc.h"
#include "qapi/visitor.h"
-#include "qapi-event.h"
-#include "qmp-commands.h"
#ifdef TARGET_I386
#include "hw/i386/apic.h"
diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
index 48224493a0c..f456cea2e71 100644
--- a/hw/virtio/virtio-balloon.c
+++ b/hw/virtio/virtio-balloon.c
@@ -24,8 +24,8 @@
#include "sysemu/kvm.h"
#include "exec/address-spaces.h"
#include "qapi/error.h"
+#include "qapi/qapi-events-misc.h"
#include "qapi/visitor.h"
-#include "qapi-event.h"
#include "trace.h"
#include "qemu/error-report.h"
diff --git a/hw/watchdog/watchdog.c b/hw/watchdog/watchdog.c
index c7843d5748a..6e8ba061d8e 100644
--- a/hw/watchdog/watchdog.c
+++ b/hw/watchdog/watchdog.c
@@ -24,12 +24,12 @@
#include "qemu/config-file.h"
#include "qemu/queue.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-run-state.h"
#include "qapi/qapi-events-run-state.h"
#include "sysemu/sysemu.h"
#include "sysemu/watchdog.h"
#include "hw/nmi.h"
#include "qemu/help_option.h"
-#include "qmp-commands.h"
static WatchdogAction watchdog_action = WATCHDOG_ACTION_RESET;
static QLIST_HEAD(watchdog_list, WatchdogTimerModel) watchdog_list;
diff --git a/iothread.c b/iothread.c
index 4b9bbde4cdc..2ec5a3bffea 100644
--- a/iothread.c
+++ b/iothread.c
@@ -18,8 +18,8 @@
#include "block/aio.h"
#include "block/block.h"
#include "sysemu/iothread.h"
-#include "qmp-commands.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qemu/error-report.h"
#include "qemu/rcu.h"
#include "qemu/main-loop.h"
diff --git a/migration/savevm.c b/migration/savevm.c
index 8e6d8724524..358c5b51e2f 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -41,12 +41,13 @@
#include "savevm.h"
#include "postcopy-ram.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-migration.h"
+#include "qapi/qapi-commands-misc.h"
#include "qapi/qmp/qerror.h"
#include "qemu/error-report.h"
#include "sysemu/cpus.h"
#include "exec/memory.h"
#include "exec/target_page.h"
-#include "qmp-commands.h"
#include "trace.h"
#include "qemu/iov.h"
#include "block/snapshot.h"
diff --git a/numa.c b/numa.c
index 7e0e789b02d..5d7529c1d90 100644
--- a/numa.c
+++ b/numa.c
@@ -29,12 +29,12 @@
#include "qemu/bitmap.h"
#include "qom/cpu.h"
#include "qemu/error-report.h"
-#include "qapi-visit.h"
#include "qapi/error.h"
#include "qapi/opts-visitor.h"
+#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-visit-misc.h"
#include "hw/boards.h"
#include "sysemu/hostmem.h"
-#include "qmp-commands.h"
#include "hw/mem/pc-dimm.h"
#include "qemu/option.h"
#include "qemu/config-file.h"
diff --git a/qdev-monitor.c b/qdev-monitor.c
index 846238175f3..b8f6bc3f7ed 100644
--- a/qdev-monitor.c
+++ b/qdev-monitor.c
@@ -22,9 +22,9 @@
#include "hw/sysbus.h"
#include "monitor/monitor.h"
#include "monitor/qdev.h"
-#include "qmp-commands.h"
#include "sysemu/arch_init.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qerror.h"
#include "qemu/config-file.h"
diff --git a/qmp.c b/qmp.c
index 793f6f33230..a8d4eba973e 100644
--- a/qmp.c
+++ b/qmp.c
@@ -21,7 +21,6 @@
#include "sysemu/sysemu.h"
#include "qemu/config-file.h"
#include "qemu/uuid.h"
-#include "qmp-commands.h"
#include "chardev/char.h"
#include "ui/qemu-spice.h"
#include "ui/vnc.h"
@@ -32,6 +31,9 @@
#include "sysemu/block-backend.h"
#include "qom/qom-qobject.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-block-core.h"
+#include "qapi/qapi-commands-misc.h"
+#include "qapi/qapi-commands-ui.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qerror.h"
#include "qapi/qobject-input-visitor.h"
diff --git a/stubs/uuid.c b/stubs/uuid.c
index a880de8d61d..a802e9836bc 100644
--- a/stubs/uuid.c
+++ b/stubs/uuid.c
@@ -1,7 +1,7 @@
#include "qemu/osdep.h"
#include "qemu-common.h"
+#include "qapi/qapi-commands-misc.h"
#include "qemu/uuid.h"
-#include "qmp-commands.h"
UuidInfo *qmp_query_uuid(Error **errp)
{
diff --git a/stubs/vmgenid.c b/stubs/vmgenid.c
index 3c8fe55bdf3..568e42b0648 100644
--- a/stubs/vmgenid.c
+++ b/stubs/vmgenid.c
@@ -1,6 +1,6 @@
#include "qemu/osdep.h"
-#include "qmp-commands.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qapi/qmp/qerror.h"
GuidInfo *qmp_query_vm_generation_id(Error **errp)
diff --git a/stubs/xen-hvm.c b/stubs/xen-hvm.c
index 3ca6c51b212..0067bcc6db7 100644
--- a/stubs/xen-hvm.c
+++ b/stubs/xen-hvm.c
@@ -12,7 +12,7 @@
#include "qemu-common.h"
#include "hw/xen/xen.h"
#include "exec/memory.h"
-#include "qmp-commands.h"
+#include "qapi/qapi-commands-misc.h"
int xen_pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num)
{
diff --git a/target/arm/monitor.c b/target/arm/monitor.c
index 299cb80ae7d..4cdd2676ddc 100644
--- a/target/arm/monitor.c
+++ b/target/arm/monitor.c
@@ -19,10 +19,11 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
+
#include "qemu/osdep.h"
-#include "qmp-commands.h"
#include "hw/boards.h"
#include "kvm_arm.h"
+#include "qapi/qapi-commands-misc.h"
static GICCapability *gic_cap_new(int version)
{
diff --git a/target/i386/cpu.c b/target/i386/cpu.c
index b5e431e769d..2c04645ceac 100644
--- a/target/i386/cpu.c
+++ b/target/i386/cpu.c
@@ -31,10 +31,10 @@
#include "qemu/option.h"
#include "qemu/config-file.h"
#include "qapi/error.h"
+#include "qapi/qapi-visit-misc.h"
+#include "qapi/qapi-visit-run-state.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qerror.h"
-
-#include "qapi-visit.h"
#include "qapi/visitor.h"
#include "qom/qom-qobject.h"
#include "sysemu/arch_init.h"
diff --git a/tests/qmp-test.c b/tests/qmp-test.c
index 580848307ad..22445d9ec25 100644
--- a/tests/qmp-test.c
+++ b/tests/qmp-test.c
@@ -12,8 +12,9 @@
#include "qemu/osdep.h"
#include "libqtest.h"
-#include "qapi-visit.h"
#include "qapi/error.h"
+#include "qapi/qapi-visit-introspect.h"
+#include "qapi/qapi-visit-misc.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qlist.h"
#include "qapi/qobject-input-visitor.h"
diff --git a/tests/test-qobject-input-visitor.c
b/tests/test-qobject-input-visitor.c
index 3900be26101..d3a56bd0712 100644
--- a/tests/test-qobject-input-visitor.c
+++ b/tests/test-qobject-input-visitor.c
@@ -15,6 +15,7 @@
#include "qemu-common.h"
#include "qapi/error.h"
+#include "qapi/qapi-visit-introspect.h"
#include "qapi/qobject-input-visitor.h"
#include "test-qapi-visit.h"
#include "qapi/qmp/qbool.h"
@@ -25,7 +26,6 @@
#include "qapi/qmp/qjson.h"
#include "test-qmp-introspect.h"
#include "qmp-introspect.h"
-#include "qapi-visit.h"
typedef struct TestInputVisitorData {
QObject *obj;
diff --git a/tests/test-visitor-serialization.c
b/tests/test-visitor-serialization.c
index dd7e51d4f5d..438c18a0d64 100644
--- a/tests/test-visitor-serialization.c
+++ b/tests/test-visitor-serialization.c
@@ -23,7 +23,6 @@
#include "qapi/qobject-output-visitor.h"
#include "qapi/string-input-visitor.h"
#include "qapi/string-output-visitor.h"
-#include "qapi-visit.h"
#include "qapi/dealloc-visitor.h"
enum PrimitiveTypeKind {
diff --git a/ui/gtk.c b/ui/gtk.c
index ab646b70e17..0750262ca8f 100644
--- a/ui/gtk.c
+++ b/ui/gtk.c
@@ -37,6 +37,7 @@
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qemu/cutils.h"
#include "ui/console.h"
@@ -52,7 +53,6 @@
#include "trace.h"
#include "ui/input.h"
#include "sysemu/sysemu.h"
-#include "qmp-commands.h"
#include "keymaps.h"
#include "chardev/char.h"
#include "qom/object.h"
diff --git a/util/qemu-config.c b/util/qemu-config.c
index 10cae120cca..c651c4826e7 100644
--- a/util/qemu-config.c
+++ b/util/qemu-config.c
@@ -1,12 +1,12 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
+#include "qapi/qapi-commands-misc.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qlist.h"
#include "qemu-common.h"
#include "qemu/error-report.h"
#include "qemu/option.h"
#include "qemu/config-file.h"
-#include "qmp-commands.h"
static QemuOptsList *vm_config_groups[48];
static QemuOptsList *drive_config_groups[5];
diff --git a/.gitignore b/.gitignore
index 42c57998fd5..7f162e862fe 100644
--- a/.gitignore
+++ b/.gitignore
@@ -38,6 +38,7 @@
/qapi/qapi-commands-crypto.[ch]
/qapi/qapi-commands-introspect.[ch]
/qapi/qapi-commands-migration.[ch]
+/qapi/qapi-commands-misc.[ch]
/qapi/qapi-commands-net.[ch]
/qapi/qapi-commands-rocker.[ch]
/qapi/qapi-commands-run-state.[ch]
@@ -53,6 +54,7 @@
/qapi/qapi-events-crypto.[ch]
/qapi/qapi-events-introspect.[ch]
/qapi/qapi-events-migration.[ch]
+/qapi/qapi-events-misc.[ch]
/qapi/qapi-events-net.[ch]
/qapi/qapi-events-rocker.[ch]
/qapi/qapi-events-run-state.[ch]
@@ -68,6 +70,7 @@
/qapi/qapi-types-crypto.[ch]
/qapi/qapi-types-introspect.[ch]
/qapi/qapi-types-migration.[ch]
+/qapi/qapi-types-misc.[ch]
/qapi/qapi-types-net.[ch]
/qapi/qapi-types-rocker.[ch]
/qapi/qapi-types-run-state.[ch]
@@ -84,6 +87,7 @@
/qapi/qapi-visit-crypto.[ch]
/qapi/qapi-visit-introspect.[ch]
/qapi/qapi-visit-migration.[ch]
+/qapi/qapi-visit-misc.[ch]
/qapi/qapi-visit-net.[ch]
/qapi/qapi-visit-rocker.[ch]
/qapi/qapi-visit-run-state.[ch]
--
2.14.3
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-block] [PULL 25/30] qapi: Empty out qapi-schema.json,
Eric Blake <=