[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 03/13] block: Relax restrictions for blockdev-snapshot
From: |
Kevin Wolf |
Subject: |
[PULL 03/13] block: Relax restrictions for blockdev-snapshot |
Date: |
Wed, 11 Mar 2020 16:42:08 +0100 |
blockdev-snapshot returned an error if the overlay was already in use,
which it defined as having any BlockBackend parent. This is in fact both
too strict (some parents can tolerate the change of visible data caused
by attaching a backing file) and too loose (some non-BlockBackend
parents may not be happy with it).
One important use case that is prevented by the too strict check is live
storage migration with blockdev-mirror. Here, the target node is
usually opened without a backing file so that the active layer is
mirrored while its backing chain can be copied in the background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client, so it needs a way to do this.
blockdev-snapshot is the obvious way, so this patch makes it work in
this scenario. The new condition is that no parent uses CONSISTENT_READ
permissions. This will ensure that the operation will still be blocked
when the node is attached to the guest device, so blockdev-snapshot
remains safe.
(For the sake of completeness, x-blockdev-reopen can be used to achieve
the same, however it is a big hammer, performs the graph change
completely unchecked and is still experimental. So even with the option
of using x-blockdev-reopen, there are reasons why blockdev-snapshot
should be able to perform this operation.)
Signed-off-by: Kevin Wolf <address@hidden>
Message-Id: <address@hidden>
Reviewed-by: Peter Krempa <address@hidden>
Tested-by: Peter Krempa <address@hidden>
Signed-off-by: Kevin Wolf <address@hidden>
---
blockdev.c | 14 ++++++++------
tests/qemu-iotests/085.out | 4 ++--
2 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index 257cb37682..ea89896f27 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1471,6 +1471,7 @@ static void external_snapshot_prepare(BlkActionState
*common,
TransactionAction *action = common->action;
AioContext *aio_context;
AioContext *old_context;
+ uint64_t perm, shared;
int ret;
/* 'blockdev-snapshot' and 'blockdev-snapshot-sync' have similar
@@ -1586,16 +1587,17 @@ static void external_snapshot_prepare(BlkActionState
*common,
goto out;
}
- if (bdrv_has_blk(state->new_bs)) {
+ /*
+ * Allow attaching a backing file to an overlay that's already in use only
+ * if the parents don't assume that they are already seeing a valid image.
+ * (Specifically, allow it as a mirror target, which is write-only access.)
+ */
+ bdrv_get_cumulative_perm(state->new_bs, &perm, &shared);
+ if (perm & BLK_PERM_CONSISTENT_READ) {
error_setg(errp, "The overlay is already in use");
goto out;
}
- if (bdrv_op_is_blocked(state->new_bs, BLOCK_OP_TYPE_EXTERNAL_SNAPSHOT,
- errp)) {
- goto out;
- }
-
if (state->new_bs->backing != NULL) {
error_setg(errp, "The overlay already has a backing image");
goto out;
diff --git a/tests/qemu-iotests/085.out b/tests/qemu-iotests/085.out
index d94ad22f70..fd11aae678 100644
--- a/tests/qemu-iotests/085.out
+++ b/tests/qemu-iotests/085.out
@@ -82,7 +82,7 @@ Formatting 'TEST_DIR/12-snapshot-v0.IMGFMT', fmt=IMGFMT
size=134217728 backing_f
=== Invalid command - cannot create a snapshot using a file BDS ===
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'virtio0',
'overlay':'file_12' } }
-{"error": {"class": "GenericError", "desc": "The overlay does not support
backing images"}}
+{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
=== Invalid command - snapshot node used as active layer ===
@@ -96,7 +96,7 @@ Formatting 'TEST_DIR/12-snapshot-v0.IMGFMT', fmt=IMGFMT
size=134217728 backing_f
=== Invalid command - snapshot node used as backing hd ===
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0',
'overlay':'snap_11' } }
-{"error": {"class": "GenericError", "desc": "Node 'snap_11' is busy: node is
used as backing hd of 'snap_12'"}}
+{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
=== Invalid command - snapshot node has a backing image ===
--
2.20.1
- [PULL 00/13] Block layer patches, Kevin Wolf, 2020/03/11
- [PULL 01/13] qom-qmp-cmds: fix two memleaks in qmp_object_add, Kevin Wolf, 2020/03/11
- [PULL 03/13] block: Relax restrictions for blockdev-snapshot,
Kevin Wolf <=
- [PULL 04/13] iotests: Fix run_job() with use_log=False, Kevin Wolf, 2020/03/11
- [PULL 05/13] iotests: Test mirror with temporarily disabled target backing file, Kevin Wolf, 2020/03/11
- [PULL 06/13] block: Fix cross-AioContext blockdev-snapshot, Kevin Wolf, 2020/03/11
- [PULL 07/13] iotests: Add iothread cases to 155, Kevin Wolf, 2020/03/11
- [PULL 02/13] block: Make bdrv_get_cumulative_perm() public, Kevin Wolf, 2020/03/11
- [PULL 08/13] qapi: Add '@allow-write-only-overlay' feature for 'blockdev-snapshot', Kevin Wolf, 2020/03/11
- [PULL 09/13] tests/qemu-iotests: Fix socket_scm_helper build path, Kevin Wolf, 2020/03/11
- [PULL 11/13] block.c: adding bdrv_co_delete_file, Kevin Wolf, 2020/03/11
- [PULL 12/13] crypto.c: cleanup created file when block_crypto_co_create_opts_luks fails, Kevin Wolf, 2020/03/11
- [PULL 10/13] block: introducing 'bdrv_co_delete_file' interface, Kevin Wolf, 2020/03/11