[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v5 08/26] nvme: refactor device realization
From: |
Maxim Levitsky |
Subject: |
Re: [PATCH v5 08/26] nvme: refactor device realization |
Date: |
Wed, 25 Mar 2020 12:21:26 +0200 |
On Mon, 2020-03-16 at 00:43 -0700, Klaus Birkelund Jensen wrote:
> On Feb 12 11:27, Maxim Levitsky wrote:
> > On Tue, 2020-02-04 at 10:51 +0100, Klaus Jensen wrote:
> > > This patch splits up nvme_realize into multiple individual functions,
> > > each initializing a different subset of the device.
> > >
> > > Signed-off-by: Klaus Jensen <address@hidden>
> > > ---
> > > hw/block/nvme.c | 175 +++++++++++++++++++++++++++++++-----------------
> > > hw/block/nvme.h | 21 ++++++
> > > 2 files changed, 133 insertions(+), 63 deletions(-)
> > >
> > > diff --git a/hw/block/nvme.c b/hw/block/nvme.c
> > > index e1810260d40b..81514eaef63a 100644
> > > --- a/hw/block/nvme.c
> > > +++ b/hw/block/nvme.c
> > > @@ -44,6 +44,7 @@
> > > #include "nvme.h"
> > >
> > > #define NVME_SPEC_VER 0x00010201
> > > +#define NVME_MAX_QS PCI_MSIX_FLAGS_QSIZE
> > >
> > > #define NVME_GUEST_ERR(trace, fmt, ...) \
> > > do { \
> > > @@ -1325,67 +1326,106 @@ static const MemoryRegionOps nvme_cmb_ops = {
> > > },
> > > };
> > >
> > > -static void nvme_realize(PCIDevice *pci_dev, Error **errp)
> > > +static int nvme_check_constraints(NvmeCtrl *n, Error **errp)
> > > {
> > > - NvmeCtrl *n = NVME(pci_dev);
> > > - NvmeIdCtrl *id = &n->id_ctrl;
> > > -
> > > - int i;
> > > - int64_t bs_size;
> > > - uint8_t *pci_conf;
> > > -
> > > - if (!n->params.num_queues) {
> > > - error_setg(errp, "num_queues can't be zero");
> > > - return;
> > > - }
> > > + NvmeParams *params = &n->params;
> > >
> > > if (!n->conf.blk) {
> > > - error_setg(errp, "drive property not set");
> > > - return;
> > > + error_setg(errp, "nvme: block backend not configured");
> > > + return 1;
> >
> > As a matter of taste, negative values indicate error, and 0 is the success
> > value.
> > In Linux kernel this is even an official rule.
> > > }
>
> Fixed.
>
> > >
> > > - bs_size = blk_getlength(n->conf.blk);
> > > - if (bs_size < 0) {
> > > - error_setg(errp, "could not get backing file size");
> > > - return;
> > > + if (!params->serial) {
> > > + error_setg(errp, "nvme: serial not configured");
> > > + return 1;
> > > }
> > >
> > > - if (!n->params.serial) {
> > > - error_setg(errp, "serial property not set");
> > > - return;
> > > + if ((params->num_queues < 1 || params->num_queues > NVME_MAX_QS)) {
> > > + error_setg(errp, "nvme: invalid queue configuration");
> >
> > Maybe something like "nvme: invalid queue count specified, should be
> > between 1 and ..."?
> > > + return 1;
> > > }
>
> Fixed.
Thanks
>
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int nvme_init_blk(NvmeCtrl *n, Error **errp)
> > > +{
> > > blkconf_blocksizes(&n->conf);
> > > if (!blkconf_apply_backend_options(&n->conf,
> > > blk_is_read_only(n->conf.blk),
> > > - false, errp)) {
> > > - return;
> > > + false, errp)) {
> > > + return 1;
> > > }
> > >
> > > - pci_conf = pci_dev->config;
> > > - pci_conf[PCI_INTERRUPT_PIN] = 1;
> > > - pci_config_set_prog_interface(pci_dev->config, 0x2);
> > > - pci_config_set_class(pci_dev->config, PCI_CLASS_STORAGE_EXPRESS);
> > > - pcie_endpoint_cap_init(pci_dev, 0x80);
> > > + return 0;
> > > +}
> > >
> > > +static void nvme_init_state(NvmeCtrl *n)
> > > +{
> > > n->num_namespaces = 1;
> > > n->reg_size = pow2ceil(0x1004 + 2 * (n->params.num_queues + 1) * 4);
> >
> > Isn't that wrong?
> > First 4K of mmio (0x1000) is the registers, and that is followed by the
> > doorbells,
> > and each doorbell takes 8 bytes (assuming regular doorbell stride).
> > so n->params.num_queues + 1 should be total number of queues, thus the
> > 0x1004 should be 0x1000 IMHO.
> > I might miss some rounding magic here though.
> >
>
> Yeah. I think you are right. It all becomes slightly more fishy due to
> the num_queues device parameter being 1's based and accounts for the
> admin queue pair.
>
> But in get/set features, the value has to be 0's based and only account
> for the I/O queues, so we need to subtract 2 from the value. It's
> confusing all around.
Yea, I can't agree more on that. The zero based values had bitten
me few times while I developed nvme-mdev as well.
>
> Since the admin queue pair isn't really optional I think it would be
> better that we introduces a new max_ioqpairs parameter that is 1's
> based, counts number of pairs and obviously only accounts for the io
> queues.
>
> I guess we need to keep the num_queues parameter around for
> compatibility.
>
> The doorbells are only 4 bytes btw, but the calculation still looks
I don't understand that. Each doorbell is indeed 4 bytes, but they come
in pairs so each doorbell pair is 8 bytes.
BTW, the spec has so called doorbell stride, which allows to artificially
increase
each doorbell by a power of two. This was intended for software implementations
(like my nvme-mdev), to make sure that each doorbell takes exactly one
cacheline.
I personally wasn't able to notice any measurable difference, but then my
nvme-mdev
adds so little overhead, that it might not be measurable.
You might want to support this sometime in the future to increase the feature
coverage
of this nvme device.
> wrong. With a max_ioqpairs parameter in place, the reg_size should be
>
> pow2ceil(0x1008 + 2 * (n->params.max_ioqpairs) * 4)
>
> Right? Thats 0x1000 for the core registers, 8 bytes for the sq/cq
> doorbells for the admin queue pair, and then room for the i/o queue
> pairs.
Looks great.
BTW,
>
> I added a patch for this in v6.
>
> > > - n->ns_size = bs_size / (uint64_t)n->num_namespaces;
> > > -
> > > n->namespaces = g_new0(NvmeNamespace, n->num_namespaces);
> > > n->sq = g_new0(NvmeSQueue *, n->params.num_queues);
> > > n->cq = g_new0(NvmeCQueue *, n->params.num_queues);
> > > +}
> > >
> > > - memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n,
> > > - "nvme", n->reg_size);
> > > +static void nvme_init_cmb(NvmeCtrl *n, PCIDevice *pci_dev)
> > > +{
> > > + NVME_CMBLOC_SET_BIR(n->bar.cmbloc, 2);
> >
> > It would be nice to have #define for CMB bar number
>
> Added.
Thanks!
>
> > > + NVME_CMBLOC_SET_OFST(n->bar.cmbloc, 0);
> > > +
> > > + NVME_CMBSZ_SET_SQS(n->bar.cmbsz, 1);
> > > + NVME_CMBSZ_SET_CQS(n->bar.cmbsz, 0);
> > > + NVME_CMBSZ_SET_LISTS(n->bar.cmbsz, 0);
> > > + NVME_CMBSZ_SET_RDS(n->bar.cmbsz, 1);
> > > + NVME_CMBSZ_SET_WDS(n->bar.cmbsz, 1);
> > > + NVME_CMBSZ_SET_SZU(n->bar.cmbsz, 2);
> > > + NVME_CMBSZ_SET_SZ(n->bar.cmbsz, n->params.cmb_size_mb);
> > > +
> > > + n->cmbloc = n->bar.cmbloc;
> > > + n->cmbsz = n->bar.cmbsz;
> > > +
> > > + n->cmbuf = g_malloc0(NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
> > > + memory_region_init_io(&n->ctrl_mem, OBJECT(n), &nvme_cmb_ops, n,
> > > + "nvme-cmb",
> > > NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
> > > + pci_register_bar(pci_dev, NVME_CMBLOC_BIR(n->bar.cmbloc),
> >
> > Same here although since you read it here from the controller register,
> > then maybe leave it as is. I prefer though for this kind of thing
> > to have a #define and use it everywhere.
> >
>
> Done.
>
> > > + PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64 |
> > > + PCI_BASE_ADDRESS_MEM_PREFETCH, &n->ctrl_mem);
> > > +}
> > > +
> > > +static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev)
> > > +{
> > > + uint8_t *pci_conf = pci_dev->config;
> > > +
> > > + pci_conf[PCI_INTERRUPT_PIN] = 1;
> > > + pci_config_set_prog_interface(pci_conf, 0x2);
> >
> > Nitpick: How about adding some #define for that as well?
> > (I know that this code is copied as is but still)
>
> Yeah. A PCI_PI_NVME or something would be nice. But this should probably
> go to some pci related header file? Any idea where that would fit?
in include/hw/pci/pci_ids.h maybe?
>
> > > + pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
> > > + pci_config_set_device_id(pci_conf, 0x5845);
> > > + pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_EXPRESS);
> > > + pcie_endpoint_cap_init(pci_dev, 0x80);
> > > +
> > > + memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n,
> > > "nvme",
> > > + n->reg_size);
> >
> > Code on split lines should start at column right after the '('
> > Now its my turn to notice this - our checkpatch.pl doesn't check this,
> > and I can't explain how often I am getting burnt on this myself.
> >
> > There are *lot* of these issues, I pointed out some of them but you should
> > check all the patches for this.
> >
>
> I fixed all that :)
Thanks, but I bet that some of this remained - taking from my experience,
since I also like you wasn't used to this rule,
so I didn't yet adopt that rule subconsciously, and our checkpatch.pl
doesn't check for it, so I keep on violating this rule in most patches I send
despite me checking each patch for few times.
I'll go over V6, and if I spot this I'll take a note, now that you fixed most of
this issues.
Thanks again.
>
> >
> > > pci_register_bar(pci_dev, 0,
> > > PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64,
> > > &n->iomem);
> >
> > Split line alignment issue here as well.
> > > msix_init_exclusive_bar(pci_dev, n->params.num_queues, 4, NULL);
> > >
> > > + if (n->params.cmb_size_mb) {
> > > + nvme_init_cmb(n, pci_dev);
> > > + }
> > > +}
> > > +
> > > +static void nvme_init_ctrl(NvmeCtrl *n)
> > > +{
> > > + NvmeIdCtrl *id = &n->id_ctrl;
> > > + NvmeParams *params = &n->params;
> > > + uint8_t *pci_conf = n->parent_obj.config;
> > > +
> > > id->vid = cpu_to_le16(pci_get_word(pci_conf + PCI_VENDOR_ID));
> > > id->ssvid = cpu_to_le16(pci_get_word(pci_conf +
> > > PCI_SUBSYSTEM_VENDOR_ID));
> > > strpadcpy((char *)id->mn, sizeof(id->mn), "QEMU NVMe Ctrl", ' ');
> > > strpadcpy((char *)id->fr, sizeof(id->fr), "1.0", ' ');
> > > - strpadcpy((char *)id->sn, sizeof(id->sn), n->params.serial, ' ');
> > > + strpadcpy((char *)id->sn, sizeof(id->sn), params->serial, ' ');
> > > id->rab = 6;
> > > id->ieee[0] = 0x00;
> > > id->ieee[1] = 0x02;
> > > @@ -1431,46 +1471,55 @@ static void nvme_realize(PCIDevice *pci_dev,
> > > Error **errp)
> > >
> > > n->bar.vs = NVME_SPEC_VER;
> > > n->bar.intmc = n->bar.intms = 0;
> > > +}
> > >
> > > - if (n->params.cmb_size_mb) {
> > > +static int nvme_init_namespace(NvmeCtrl *n, NvmeNamespace *ns, Error
> > > **errp)
> > > +{
> > > + int64_t bs_size;
> > > + NvmeIdNs *id_ns = &ns->id_ns;
> > >
> > > - NVME_CMBLOC_SET_BIR(n->bar.cmbloc, 2);
> > > - NVME_CMBLOC_SET_OFST(n->bar.cmbloc, 0);
> > > + bs_size = blk_getlength(n->conf.blk);
> > > + if (bs_size < 0) {
> > > + error_setg_errno(errp, -bs_size, "blk_getlength");
> > > + return 1;
> > > + }
> > >
> > > - NVME_CMBSZ_SET_SQS(n->bar.cmbsz, 1);
> > > - NVME_CMBSZ_SET_CQS(n->bar.cmbsz, 0);
> > > - NVME_CMBSZ_SET_LISTS(n->bar.cmbsz, 0);
> > > - NVME_CMBSZ_SET_RDS(n->bar.cmbsz, 1);
> > > - NVME_CMBSZ_SET_WDS(n->bar.cmbsz, 1);
> > > - NVME_CMBSZ_SET_SZU(n->bar.cmbsz, 2); /* MBs */
> > > - NVME_CMBSZ_SET_SZ(n->bar.cmbsz, n->params.cmb_size_mb);
> > > + id_ns->lbaf[0].ds = BDRV_SECTOR_BITS;
> > > + n->ns_size = bs_size;
> > >
> > > - n->cmbloc = n->bar.cmbloc;
> > > - n->cmbsz = n->bar.cmbsz;
> > > + id_ns->ncap = id_ns->nuse = id_ns->nsze =
> > > + cpu_to_le64(nvme_ns_nlbas(n, ns));
> >
> > I myself don't know how to align these splits to be honest.
> > I would just split this into multiple statements.
> > >
> > > - n->cmbuf = g_malloc0(NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
> > > - memory_region_init_io(&n->ctrl_mem, OBJECT(n), &nvme_cmb_ops, n,
> > > - "nvme-cmb",
> > > NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
> > > - pci_register_bar(pci_dev, NVME_CMBLOC_BIR(n->bar.cmbloc),
> > > - PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64
> > > |
> > > - PCI_BASE_ADDRESS_MEM_PREFETCH, &n->ctrl_mem);
> > > + return 0;
> > > +}
> > >
> > > +static void nvme_realize(PCIDevice *pci_dev, Error **errp)
> > > +{
> > > + NvmeCtrl *n = NVME(pci_dev);
> > > + Error *local_err = NULL;
> > > + int i;
> > > +
> > > + if (nvme_check_constraints(n, &local_err)) {
> > > + error_propagate_prepend(errp, local_err,
> > > "nvme_check_constraints: ");
> >
> > Do we need that hint for the end user?
>
> Removed.
>
> > > + return;
> > > + }
> > > +
> > > + nvme_init_state(n);
> > > +
> > > + if (nvme_init_blk(n, &local_err)) {
> > > + error_propagate_prepend(errp, local_err, "nvme_init_blk: ");
> >
> > Same here
>
> Done.
>
>
> > > + return;
> > > }
> > >
> > > for (i = 0; i < n->num_namespaces; i++) {
> > > - NvmeNamespace *ns = &n->namespaces[i];
> > > - NvmeIdNs *id_ns = &ns->id_ns;
> > > - id_ns->nsfeat = 0;
> > > - id_ns->nlbaf = 0;
> > > - id_ns->flbas = 0;
> > > - id_ns->mc = 0;
> > > - id_ns->dpc = 0;
> > > - id_ns->dps = 0;
> > > - id_ns->lbaf[0].ds = BDRV_SECTOR_BITS;
> > > - id_ns->ncap = id_ns->nuse = id_ns->nsze =
> > > - cpu_to_le64(n->ns_size >>
> > > - id_ns->lbaf[NVME_ID_NS_FLBAS_INDEX(ns->id_ns.flbas)].ds);
> > > + if (nvme_init_namespace(n, &n->namespaces[i], &local_err)) {
> > > + error_propagate_prepend(errp, local_err,
> > > "nvme_init_namespace: ");
> >
> > And here
>
> Done.
>
>
> > > + return;
> > > + }
> > > }
> > > +
> > > + nvme_init_pci(n, pci_dev);
> > > + nvme_init_ctrl(n);
> > > }
> > >
> > > static void nvme_exit(PCIDevice *pci_dev)
> > > diff --git a/hw/block/nvme.h b/hw/block/nvme.h
> > > index 9957c4a200e2..a867bdfabafd 100644
> > > --- a/hw/block/nvme.h
> > > +++ b/hw/block/nvme.h
> > > @@ -65,6 +65,22 @@ typedef struct NvmeNamespace {
> > > NvmeIdNs id_ns;
> > > } NvmeNamespace;
> > >
> > > +static inline NvmeLBAF nvme_ns_lbaf(NvmeNamespace *ns)
> > > +{
> >
> > Its not common to return a structure in C, usually pointer is returned to
> > avoid copying. In this case this doesn't matter that much though.
>
> It's actually gonna be used a lot. So swapped to pointer.
Thanks.
>
> > > + NvmeIdNs *id_ns = &ns->id_ns;
> > > + return id_ns->lbaf[NVME_ID_NS_FLBAS_INDEX(id_ns->flbas)];
> > > +}
> > > +
> > > +static inline uint8_t nvme_ns_lbads(NvmeNamespace *ns)
> > > +{
> > > + return nvme_ns_lbaf(ns).ds;
> > > +}
> > > +
> > > +static inline size_t nvme_ns_lbads_bytes(NvmeNamespace *ns)
> > > +{
> > > + return 1 << nvme_ns_lbads(ns);
> > > +}
> > > +
> > > #define TYPE_NVME "nvme"
> > > #define NVME(obj) \
> > > OBJECT_CHECK(NvmeCtrl, (obj), TYPE_NVME)
> > > @@ -101,4 +117,9 @@ typedef struct NvmeCtrl {
> > > NvmeIdCtrl id_ctrl;
> > > } NvmeCtrl;
> > >
> > > +static inline uint64_t nvme_ns_nlbas(NvmeCtrl *n, NvmeNamespace *ns)
> > > +{
> > > + return n->ns_size >> nvme_ns_lbads(ns);
> > > +}
> >
> > Unless you need all these functions in the future, this feels like
> > it is a bit verbose.
> >
>
> These will be used in various places later.
OK, then it is all right.
>
>
Best regards,
Maxim Levitsky