Re: [PATCH 00/22] hw/riscv: sifive_u: Add missing SPI support

[Pragnesh Patel]

Hi BIn,

1) Please rebase this series on master.

2) When i tried to boot from SD card image it shows below,

pragneshp:sifive-qemu$ ./build/riscv64-softmmu/qemu-system-riscv64 -M
sifive_u,msel=11 -m 4G -nographic -bios
~/opensource/u-boot/spl/u-boot-spl.bin -device
sd-card,spi=true,drive=mycard -drive
file=~/opensource/u-boot/fsbl.gpt,id=mycard,format=raw,if=none
qemu-system-riscv64: -device sd-card,spi=true,drive=mycard: Drive
'mycard' is already in use by another device


I hacked the qemu code temporary and able to boot U-Boot from SD card,
below is my hack

pragneshp:sifive-qemu$ git diff
diff --git a/block/block-backend.c b/block/block-backend.c
index ce78d30794..cfa739fa40 100644
--- a/block/block-backend.c
+++ b/block/block-backend.c
@@ -888,10 +888,11 @@ void blk_get_perm(BlockBackend *blk, uint64_t
*perm, uint64_t *shared_perm)
  */
 int blk_attach_dev(BlockBackend *blk, DeviceState *dev)
 {
+#if 0
     if (blk->dev) {
         return -EBUSY;
     }
-
+#endif

After applying this hack, I was able to boot U-Boot from Sd card

Bootlogs:

pragneshp:sifive-qemu$ ./build/riscv64-softmmu/qemu-system-riscv64 -M
sifive_u,msel=11 -m 4G -nographic -bios
~/opensource/u-boot/spl/u-boot-spl.bin -device
sd-card,spi=true,drive=mycard -drive
file=~/opensource/u-boot/fsbl.gpt,id=mycard,format=raw,if=none

U-Boot SPL 2020.10-rc5-00007-gf9aadb57b1 (Dec 29 2020 - 17:48:05 +0530)
Trying to boot from MMC1


U-Boot 2020.10-rc5-00007-gf9aadb57b1 (Dec 29 2020 - 17:48:05 +0530)

CPU:   rv64imafdc
Model: SiFive HiFive Unleashed A00
DRAM:  4 GiB
MMC:   spi@10050000:mmc@0: 0
Loading Environment from SPIFlash... Invalid bus 0 (err=-19)
*** Warning - spi_flash_probe_bus_cs() failed, using default environment

In:    serial@10010000
Out:   serial@10010000
Err:   serial@10010000
Net:   eth0: ethernet@10090000
Hit any key to stop autoboot:  0
=>

Thanks for the series.

On Thu, Dec 31, 2020 at 5:00 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> From: Bin Meng <bin.meng@windriver.com>
>
> This adds the missing SPI support to the `sifive_u` machine in the QEMU
> mainline. With this series, upstream U-Boot for the SiFive HiFive Unleashed
> board can boot on QEMU `sifive_u` out of the box. This allows users to
> develop and test the recommended RISC-V boot flow with a real world use
> case: ZSBL (in QEMU) loads U-Boot SPL from SD card or SPI flash to L2LIM,
> then U-Boot SPL loads the payload from SD card or SPI flash that is a
> combination of OpenSBI fw_dynamic firmware and U-Boot proper.
>
> The m25p80 model is updated to support ISSI flash series. A bunch of
> ssi-sd issues are fixed, and writing to SD card in SPI mode is supported.
>
> reST documentation for RISC-V is added. Currently only `sifive_u`
> machine is documented, but more to come.
>
>
> Bin Meng (22):
>   hw/block: m25p80: Add ISSI SPI flash support
>   hw/block: m25p80: Add various ISSI flash information
>   hw/sd: ssi-sd: Fix incorrect card response sequence
>   hw/sd: sd: Support CMD59 for SPI mode
>   hw/sd: sd: Drop sd_crc16()
>   util: Add CRC16 (CCITT) calculation routines
>   hw/sd: ssi-sd: Suffix a data block with CRC16
>   hw/sd: ssi-sd: Support multiple block read (CMD18)
>   hw/sd: ssi-sd: Use macros for the dummy value and tokens in the
>     transfer
>   hw/sd: sd: Remove duplicated codes in single/multiple block read/write
>   hw/sd: sd: Allow single/multiple block write for SPI mode
>   hw/sd: sd.h: Cosmetic change of using spaces
>   hw/sd: Introduce receive_ready() callback
>   hw/sd: ssi-sd: Support single block write
>   hw/sd: ssi-sd: Support multiple block write
>   hw/ssi: Add SiFive SPI controller support
>   hw/riscv: sifive_u: Add QSPI0 controller and connect a flash
>   hw/riscv: sifive_u: Add QSPI2 controller and connect an SD card
>   hw/riscv: sifive_u: Change SIFIVE_U_GEM_IRQ to decimal value
>   docs/system: Sort targets in alphabetical order
>   docs/system: Add RISC-V documentation
>   docs/system: riscv: Add documentation for sifive_u machine
>
>  docs/system/riscv/sifive_u.rst | 336 +++++++++++++++++++++++++++++++++
>  docs/system/target-riscv.rst   |  72 +++++++
>  docs/system/targets.rst        |  20 +-
>  include/hw/riscv/sifive_u.h    |   9 +-
>  include/hw/sd/sd.h             |  44 ++---
>  include/hw/ssi/sifive_spi.h    |  47 +++++
>  include/qemu/crc-ccitt.h       |  33 ++++
>  hw/block/m25p80.c              |  51 ++++-
>  hw/riscv/sifive_u.c            |  91 +++++++++
>  hw/sd/core.c                   |  13 ++
>  hw/sd/sd.c                     |  82 +-------
>  hw/sd/ssi-sd.c                 | 127 +++++++++++--
>  hw/ssi/sifive_spi.c            | 290 ++++++++++++++++++++++++++++
>  util/crc-ccitt.c               | 127 +++++++++++++
>  hw/riscv/Kconfig               |   3 +
>  hw/ssi/Kconfig                 |   4 +
>  hw/ssi/meson.build             |   1 +
>  util/meson.build               |   1 +
>  18 files changed, 1232 insertions(+), 119 deletions(-)
>  create mode 100644 docs/system/riscv/sifive_u.rst
>  create mode 100644 docs/system/target-riscv.rst
>  create mode 100644 include/hw/ssi/sifive_spi.h
>  create mode 100644 include/qemu/crc-ccitt.h
>  create mode 100644 hw/ssi/sifive_spi.c
>  create mode 100644 util/crc-ccitt.c
>
> --
> 2.25.1
>
>