qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 1/2] qpci_device_enable: Allow for command bits hardwired to 0


From: Lev Kujawski
Subject: [PATCH 1/2] qpci_device_enable: Allow for command bits hardwired to 0
Date: Wed, 29 Jun 2022 16:34:49 +0000

Devices like the PIIX3/4 IDE controller do not support certain modes
of operation, such as memory space accesses, and indicate this lack of
support by hardwiring the applicable bits to zero. The QEMU PCI device
testing framework is hereby extended to accommodate such devices.

* tests/qtest/libqos/pci.h: Add the command_disabled word to indicate
  bits hardwired to 0.
* tests/qtest/libqos/pci.c: Verify that hardwired bits are actually
  hardwired.
* tests/qtest/ide-test.c: Use the new command_disabled member to
  indicate that PCI_COMMAND_MEMORY is hardwired in the PIIX3/4
  IDE controller.

Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
---
 tests/qtest/ide-test.c   |  1 +
 tests/qtest/libqos/pci.c | 13 +++++++------
 tests/qtest/libqos/pci.h |  1 +
 3 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/tests/qtest/ide-test.c b/tests/qtest/ide-test.c
index 5bcb75a7e5..85a3967063 100644
--- a/tests/qtest/ide-test.c
+++ b/tests/qtest/ide-test.c
@@ -173,6 +173,7 @@ static QPCIDevice *get_pci_device(QTestState *qts, QPCIBar 
*bmdma_bar,
 
     *ide_bar = qpci_legacy_iomap(dev, IDE_BASE);
 
+    dev->command_disabled = PCI_COMMAND_MEMORY;
     qpci_device_enable(dev);
 
     return dev;
diff --git a/tests/qtest/libqos/pci.c b/tests/qtest/libqos/pci.c
index b23d72346b..4f3d28d8d9 100644
--- a/tests/qtest/libqos/pci.c
+++ b/tests/qtest/libqos/pci.c
@@ -220,18 +220,19 @@ int qpci_secondary_buses_init(QPCIBus *bus)
 
 void qpci_device_enable(QPCIDevice *dev)
 {
-    uint16_t cmd;
+    const uint16_t enable_bits =
+        PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+    uint16_t cmd, new_cmd;
 
     /* FIXME -- does this need to be a bus callout? */
     cmd = qpci_config_readw(dev, PCI_COMMAND);
-    cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+    cmd |= enable_bits;
     qpci_config_writew(dev, PCI_COMMAND, cmd);
 
     /* Verify the bits are now set. */
-    cmd = qpci_config_readw(dev, PCI_COMMAND);
-    g_assert_cmphex(cmd & PCI_COMMAND_IO, ==, PCI_COMMAND_IO);
-    g_assert_cmphex(cmd & PCI_COMMAND_MEMORY, ==, PCI_COMMAND_MEMORY);
-    g_assert_cmphex(cmd & PCI_COMMAND_MASTER, ==, PCI_COMMAND_MASTER);
+    new_cmd = qpci_config_readw(dev, PCI_COMMAND);
+    new_cmd &= enable_bits;
+    g_assert_cmphex(new_cmd, ==, enable_bits & ~dev->command_disabled);
 }
 
 /**
diff --git a/tests/qtest/libqos/pci.h b/tests/qtest/libqos/pci.h
index 8389614523..eaedb98588 100644
--- a/tests/qtest/libqos/pci.h
+++ b/tests/qtest/libqos/pci.h
@@ -68,6 +68,7 @@ struct QPCIDevice
     bool msix_enabled;
     QPCIBar msix_table_bar, msix_pba_bar;
     uint64_t msix_table_off, msix_pba_off;
+    uint16_t command_disabled;
 };
 
 struct QPCIAddress {
-- 
2.34.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]