Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> writes:
Add command to sync config from vhost-user backend to the device. It
may be helpful when VHOST_USER_SLAVE_CONFIG_CHANGE_MSG failed or not
triggered interrupt to the guest or just not available (not supported
by vhost-user server).
Command result is racy if allow it during migration. Let's allow the
sync only in RUNNING state.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---
hw/block/vhost-user-blk.c | 27 ++++++++++++++++------
hw/virtio/virtio-pci.c | 9 ++++++++
include/hw/qdev-core.h | 3 +++
include/sysemu/runstate.h | 1 +
qapi/qdev.json | 21 +++++++++++++++++
system/qdev-monitor.c | 47 +++++++++++++++++++++++++++++++++++++++
system/runstate.c | 5 +++++
7 files changed, 106 insertions(+), 7 deletions(-)
diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c
index 9e6bbc6950..2f301f380c 100644
--- a/hw/block/vhost-user-blk.c
+++ b/hw/block/vhost-user-blk.c
@@ -88,27 +88,39 @@ static void vhost_user_blk_set_config(VirtIODevice *vdev,
const uint8_t *config)
s->blkcfg.wce = blkcfg->wce;
}
+static int vhost_user_blk_sync_config(DeviceState *dev, Error **errp)
+{
+ int ret;
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserBlk *s = VHOST_USER_BLK(vdev);
+
+ ret = vhost_dev_get_config(&s->dev, (uint8_t *)&s->blkcfg,
+ vdev->config_len, errp);
+ if (ret < 0) {
+ return ret;
+ }
+
+ memcpy(vdev->config, &s->blkcfg, vdev->config_len);
+ virtio_notify_config(vdev);
+
+ return 0;
+}
+
static int vhost_user_blk_handle_config_change(struct vhost_dev *dev)
{
int ret;
- VirtIODevice *vdev = dev->vdev;
- VHostUserBlk *s = VHOST_USER_BLK(dev->vdev);
Error *local_err = NULL;
if (!dev->started) {
return 0;
}
- ret = vhost_dev_get_config(dev, (uint8_t *)&s->blkcfg,
- vdev->config_len, &local_err);
+ ret = vhost_user_blk_sync_config(DEVICE(dev->vdev), &local_err);
if (ret < 0) {
error_report_err(local_err);
return ret;
}
- memcpy(dev->vdev->config, &s->blkcfg, vdev->config_len);
- virtio_notify_config(dev->vdev);
-
return 0;
}
This factors vhost_user_blk_sync_config() out of
vhost_user_blk_handle_config_change() for reuse. Correct?
@@ -576,6 +588,7 @@ static void vhost_user_blk_class_init(ObjectClass *klass, void *data)
device_class_set_props(dc, vhost_user_blk_properties);
dc->vmsd = &vmstate_vhost_user_blk;
+ dc->sync_config = vhost_user_blk_sync_config;
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
vdc->realize = vhost_user_blk_device_realize;
vdc->unrealize = vhost_user_blk_device_unrealize;
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index eaaf86402c..92afbae71c 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -2501,6 +2501,14 @@ static void virtio_pci_dc_realize(DeviceState *qdev,
Error **errp)
vpciklass->parent_dc_realize(qdev, errp);
}
+static int virtio_pci_sync_config(DeviceState *dev, Error **errp)
+{
+ VirtIOPCIProxy *proxy = VIRTIO_PCI(dev);
+ VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
+
+ return qdev_sync_config(DEVICE(vdev), errp);
+}
+
static void virtio_pci_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
@@ -2517,6 +2525,7 @@ static void virtio_pci_class_init(ObjectClass *klass,
void *data)
device_class_set_parent_realize(dc, virtio_pci_dc_realize,
&vpciklass->parent_dc_realize);
rc->phases.hold = virtio_pci_bus_reset_hold;
+ dc->sync_config = virtio_pci_sync_config;
}
I tried to follow the callbacks, but quickly gave up. Leaving to a
reviewer who understands virtio.
static const TypeInfo virtio_pci_info = {
diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
index 9228e96c87..87135bdcdf 100644
--- a/include/hw/qdev-core.h
+++ b/include/hw/qdev-core.h
@@ -95,6 +95,7 @@ typedef void (*DeviceUnrealize)(DeviceState *dev);
typedef void (*DeviceReset)(DeviceState *dev);
typedef void (*BusRealize)(BusState *bus, Error **errp);
typedef void (*BusUnrealize)(BusState *bus);
+typedef int (*DeviceSyncConfig)(DeviceState *dev, Error **errp);
/**
* struct DeviceClass - The base class for all devices.
@@ -162,6 +163,7 @@ struct DeviceClass {
DeviceReset reset;
DeviceRealize realize;
DeviceUnrealize unrealize;
+ DeviceSyncConfig sync_config;
/**
* @vmsd: device state serialisation description for
@@ -546,6 +548,7 @@ bool qdev_hotplug_allowed(DeviceState *dev, Error **errp);
*/
HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev);
void qdev_unplug(DeviceState *dev, Error **errp);
+int qdev_sync_config(DeviceState *dev, Error **errp);
void qdev_simple_device_unplug_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp);
void qdev_machine_creation_done(void);
diff --git a/include/sysemu/runstate.h b/include/sysemu/runstate.h
index 0117d243c4..296af52322 100644
--- a/include/sysemu/runstate.h
+++ b/include/sysemu/runstate.h
@@ -5,6 +5,7 @@
#include "qemu/notify.h"
bool runstate_check(RunState state);
+const char *current_run_state_str(void);
void runstate_set(RunState new_state);
RunState runstate_get(void);
bool runstate_is_running(void);
diff --git a/qapi/qdev.json b/qapi/qdev.json
index facaa0bc6a..e8be79c3d5 100644
--- a/qapi/qdev.json
+++ b/qapi/qdev.json
@@ -161,3 +161,24 @@
##
{ 'event': 'DEVICE_UNPLUG_GUEST_ERROR',
'data': { '*device': 'str', 'path': 'str' } }
+
+##
+# @device-sync-config:
+#
+# Synchronize config from backend to the guest. The command notifies
+# re-read the device config from the backend and notifies the guest
+# to re-read the config. The command may be used to notify the guest
+# about block device capcity change. Currently only vhost-user-blk
+# device supports this.
I'm not sure I understand this. To work towards an understanding, I
rephrase it, and you point out the errors.
Synchronize device configuration from host to guest part. First,
copy the configuration from the host part (backend) to the guest
part (frontend). Then notify guest software that device
configuration changed.
+#
+# @id: the device's ID or QOM path
+#
+# Features:
+#
+# @unstable: The command is experimental.
+#
+# Since: 9.1
+##
+{ 'command': 'device-sync-config',
+ 'features': [ 'unstable' ],
+ 'data': {'id': 'str'} }
diff --git a/system/qdev-monitor.c b/system/qdev-monitor.c
index 7e075d91c1..cb35ea0b86 100644
--- a/system/qdev-monitor.c
+++ b/system/qdev-monitor.c
@@ -23,6 +23,7 @@
#include "monitor/monitor.h"
#include "monitor/qdev.h"
#include "sysemu/arch_init.h"
+#include "sysemu/runstate.h"
#include "qapi/error.h"
#include "qapi/qapi-commands-qdev.h"
#include "qapi/qmp/dispatch.h"
@@ -969,6 +970,52 @@ void qmp_device_del(const char *id, Error **errp)
}
}
+int qdev_sync_config(DeviceState *dev, Error **errp)
+{
+ DeviceClass *dc = DEVICE_GET_CLASS(dev);
+
+ if (!dc->sync_config) {
+ error_setg(errp, "device-sync-config is not supported for '%s'",
+ object_get_typename(OBJECT(dev)));
+ return -ENOTSUP;
+ }
+
+ return dc->sync_config(dev, errp);
+}
+
+void qmp_device_sync_config(const char *id, Error **errp)
+{
+ DeviceState *dev;
+
+ /*
+ * During migration there is a race between syncing`config and
+ * migrating it, so let's just not allow it.
Can you briefly explain the race?
+ */
+
+ if (migration_is_running()) {
+ error_setg(errp, "Config synchronization is not allowed "
+ "during migration.");
qapi/error.h:
* The resulting message should be a single phrase, with no newline or
* trailing punctuation.
Drop the period, please.
+ return;
+ }
+
+ if (!runstate_is_running()) {
+ error_setg(errp, "Config synchronization allowed only in '%s' state, "
+ "current state is '%s'", RunState_str(RUN_STATE_RUNNING),
+ current_run_state_str());
+ return;
+ }
+
+ dev = find_device_state(id, true, errp);
+ if (!dev) {
+ return;
+ }
+
+ qdev_sync_config(dev, errp);
+}
+
void hmp_device_add(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
diff --git a/system/runstate.c b/system/runstate.c
index d6ab860eca..8fd89172ae 100644
--- a/system/runstate.c
+++ b/system/runstate.c
@@ -189,6 +189,11 @@ bool runstate_check(RunState state)
return current_run_state == state;
}
+const char *current_run_state_str(void)
+{
+ return RunState_str(current_run_state);
+}
+
This helper is used just once. Suggest to use
RunState_str(runstate_get()) instead.