[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 13/13] qapi: convert "Example" sections to rST
|
From: |
John Snow |
|
Subject: |
[PATCH 13/13] qapi: convert "Example" sections to rST |
|
Date: |
Tue, 18 Jun 2024 20:30:12 -0400 |
Eliminate the "Example" sections in QAPI doc blocks, converting them
into QMP example code blocks. This is generally done in this patch by
converting "Example:" or "Examples:" lines into ".. code-block:: QMP"
lines.
The old "Example:" or "Examples:" syntax is now caught as an error; but
with the previous commit, "Example::" is still permitted as explicit rST
syntax. ('Example' is not special in this case; any sentence that ends
with "::" will start an indented code block in rST.)
The ".. code-block:: QMP" form explicitly applies the QMP lexer and will
loosely validate an example as valid QMP/JSON. The "::" form does not
apply any lexer in particular and will not emit any errors.
It is possible to choose the QMP lexer with the "::" form by using the
Sphinx directive ".. highlight:: QMP" in the document above where the
example appears; but this changes the lexer for *all* subsequent "::"
style code-blocks in the document thereafter.
This patch does not change the default lexer for the legacy qapidoc
generator documents; future patches for the new qapidoc generator *may*
change this default.
This patch has several benefits:
1. Example sections can now be written more arbitrarily, mixing
explanatory paragraphs and code blocks however desired.
2. "Example sections" can now use fully arbitrary rST.
3. All code blocks are now lexed and validated as QMP; increasing
usability of the docs and ensuring validity of example snippets.
(To some extent - This patch only gaurantees it lexes correctly, not
that it's valid under the JSON or QMP grammars. It will catch most
small mistakes, however.)
4. Each code-block can be captioned independently without bypassing the
QMP lexer/validator.
(i.e. code blocks are now for *code* only, so we don't have to
sacrifice annotations/captions for having lexicographically correct
examples.)
For any sections with more than one example, examples are split up into
multiple code-block regions. If annotations are present, those
annotations are converted into code-block captions instead, e.g.
```
Examples:
1. Lorem Ipsum
-> { "foo": "bar" }
```
Is rewritten as:
```
.. code-block:: QMP
:caption: Example: Lorem Ipsum
-> { "foo": "bar" }
```
This process was only semi-automated:
1. Replace "Examples?:" sections with sed:
sed -i 's|# Example:|# .. code-block:: QMP|' *.json
sed -i 's|# Examples:|# .. code-block:: QMP|' *.json
2. Identify sections that no longer parse successfully by attempting the
doc build, convert annotations into captions manually.
(Tedious, oh well.)
3. Add captions where still needed:
sed -zi 's|# .. code-block:: QMP\n#\n|# .. code-block:: QMP\n# :caption:
Example\n#\n|g' *.json
Not fully ideal, but hopefully not something that has to be done very
often. (Or ever again.)
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [for block*.json]
---
docs/devel/qapi-code-gen.rst | 15 ++--
qapi/acpi.json | 6 +-
qapi/block-core.json | 120 ++++++++++++++++----------
qapi/block.json | 60 +++++++------
qapi/char.json | 36 ++++++--
qapi/control.json | 12 ++-
qapi/dump.json | 12 ++-
qapi/machine-target.json | 3 +-
qapi/machine.json | 76 +++++++++++------
qapi/migration.json | 145 +++++++++++++++++++++++---------
qapi/misc-target.json | 33 +++++---
qapi/misc.json | 48 +++++++----
qapi/net.json | 30 +++++--
qapi/pci.json | 6 +-
qapi/qapi-schema.json | 6 +-
qapi/qdev.json | 15 +++-
qapi/qom.json | 20 +++--
qapi/replay.json | 12 ++-
qapi/rocker.json | 12 ++-
qapi/run-state.json | 45 ++++++----
qapi/tpm.json | 9 +-
qapi/trace.json | 6 +-
qapi/transaction.json | 3 +-
qapi/ui.json | 62 +++++++++-----
qapi/vfio.json | 3 +-
qapi/virtio.json | 38 +++++----
qapi/yank.json | 6 +-
scripts/qapi/parser.py | 11 ++-
tests/qapi-schema/doc-good.json | 13 +--
tests/qapi-schema/doc-good.out | 18 ++--
tests/qapi-schema/doc-good.txt | 17 +---
31 files changed, 579 insertions(+), 319 deletions(-)
diff --git a/docs/devel/qapi-code-gen.rst b/docs/devel/qapi-code-gen.rst
index ae97b335cbf..5bf184d16ce 100644
--- a/docs/devel/qapi-code-gen.rst
+++ b/docs/devel/qapi-code-gen.rst
@@ -995,8 +995,8 @@ line "Features:", like this::
# @feature: Description text
A tagged section begins with a paragraph that starts with one of the
-following words: "Since:", "Example:"/"Examples:", "Returns:",
-"Errors:", "TODO:". It ends with the start of a new section.
+following words: "Since:", "Returns:", "Errors:", "TODO:". It ends with
+the start of a new section.
The second and subsequent lines of tagged sections must be indented
like this::
@@ -1020,10 +1020,9 @@ detailing a relevant error condition. For example::
A "Since: x.y.z" tagged section lists the release that introduced the
definition.
-An "Example" or "Examples" section is rendered entirely
-as literal fixed-width text. "TODO" sections are not rendered at all
-(they are for developers, not users of QMP). In other sections, the
-text is formatted, and rST markup can be used.
+"TODO" sections are not rendered at all (they are for developers, not
+users of QMP). In other sections, the text is formatted, and rST markup
+can be used.
For example::
@@ -1058,11 +1057,11 @@ For example::
#
# Since: 0.14
#
- # Example:
+ # .. code-block:: QMP
#
# -> { "execute": "query-blockstats" }
# <- {
- # ... lots of output ...
+ # ...
# }
##
{ 'command': 'query-blockstats',
diff --git a/qapi/acpi.json b/qapi/acpi.json
index aa4dbe57943..3da01f1b7fc 100644
--- a/qapi/acpi.json
+++ b/qapi/acpi.json
@@ -111,7 +111,8 @@
#
# Since: 2.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-acpi-ospm-status" }
# <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM",
"source": 1, "status": 0},
@@ -131,7 +132,8 @@
#
# Since: 2.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "ACPI_DEVICE_OST",
# "data": { "info": { "device": "d1", "slot": "0",
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 9ef23ec02ae..c4927039fc0 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -764,7 +764,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-block" }
# <- {
@@ -1168,7 +1169,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-blockstats" }
# <- {
@@ -1461,7 +1463,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "block_resize",
# "arguments": { "device": "scratch", "size": 1073741824 } }
@@ -1682,7 +1685,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-snapshot-sync",
# "arguments": { "device": "ide-hd0",
@@ -1715,7 +1719,8 @@
#
# Since: 2.5
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-add",
# "arguments": { "driver": "qcow2",
@@ -1861,7 +1866,8 @@
#
# Since: 1.3
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "block-commit",
# "arguments": { "device": "virtio0",
@@ -1899,7 +1905,8 @@
#
# Since: 1.6
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "drive-backup",
# "arguments": { "device": "drive0",
@@ -1925,7 +1932,8 @@
#
# Since: 2.3
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-backup",
# "arguments": { "device": "src-id",
@@ -1949,7 +1957,8 @@
#
# Since: 2.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-named-block-nodes" }
# <- { "return": [ { "ro":false,
@@ -2130,7 +2139,8 @@
#
# Since: 1.3
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "drive-mirror",
# "arguments": { "device": "ide-hd0",
@@ -2307,7 +2317,8 @@
#
# Since: 2.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "block-dirty-bitmap-add",
# "arguments": { "node": "drive0", "name": "bitmap0" } }
@@ -2331,7 +2342,8 @@
#
# Since: 2.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "block-dirty-bitmap-remove",
# "arguments": { "node": "drive0", "name": "bitmap0" } }
@@ -2354,7 +2366,8 @@
#
# Since: 2.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "block-dirty-bitmap-clear",
# "arguments": { "node": "drive0", "name": "bitmap0" } }
@@ -2375,7 +2388,8 @@
#
# Since: 4.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "block-dirty-bitmap-enable",
# "arguments": { "node": "drive0", "name": "bitmap0" } }
@@ -2396,7 +2410,8 @@
#
# Since: 4.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "block-dirty-bitmap-disable",
# "arguments": { "node": "drive0", "name": "bitmap0" } }
@@ -2428,7 +2443,8 @@
#
# Since: 4.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "block-dirty-bitmap-merge",
# "arguments": { "node": "drive0", "target": "bitmap0",
@@ -2537,7 +2553,8 @@
#
# Since: 2.6
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-mirror",
# "arguments": { "device": "ide-hd0",
@@ -2862,7 +2879,8 @@
#
# Since: 1.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "block-stream",
# "arguments": { "device": "virtio0",
@@ -4801,7 +4819,8 @@
#
# Since: 2.9
#
-# Examples:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-add",
# "arguments": {
@@ -4815,6 +4834,9 @@
# }
# <- { "return": {} }
#
+# .. code-block:: QMP
+# :caption: Example
+#
# -> { "execute": "blockdev-add",
# "arguments": {
# "driver": "qcow2",
@@ -4899,7 +4921,8 @@
#
# Since: 2.9
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-add",
# "arguments": {
@@ -5548,7 +5571,8 @@
# .. note:: If action is "stop", a STOP event will eventually follow the
# BLOCK_IO_ERROR event.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "BLOCK_IMAGE_CORRUPTED",
# "data": { "device": "", "node-name": "drive", "fatal": false,
@@ -5597,7 +5621,8 @@
#
# Since: 0.13
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "BLOCK_IO_ERROR",
# "data": { "device": "ide0-hd1",
@@ -5637,7 +5662,8 @@
#
# Since: 1.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "BLOCK_JOB_COMPLETED",
# "data": { "type": "stream", "device": "virtio-disk0",
@@ -5672,7 +5698,8 @@
#
# Since: 1.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "BLOCK_JOB_CANCELLED",
# "data": { "type": "stream", "device": "virtio-disk0",
@@ -5701,7 +5728,8 @@
#
# Since: 1.3
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "BLOCK_JOB_ERROR",
# "data": { "device": "ide0-hd1",
@@ -5736,7 +5764,8 @@
#
# Since: 1.3
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "BLOCK_JOB_READY",
# "data": { "device": "drive0", "type": "mirror", "speed": 0,
@@ -5764,7 +5793,8 @@
#
# Since: 2.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "BLOCK_JOB_PENDING",
# "data": { "type": "mirror", "id": "backup_1" },
@@ -5838,7 +5868,8 @@
#
# Since: 2.3
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "block-set-write-threshold",
# "arguments": { "node-name": "mydev",
@@ -5883,9 +5914,8 @@
#
# Since: 2.7
#
-# Examples:
-#
-# 1. Add a new node to a quorum
+# .. code-block:: QMP
+# :caption: Example: Add a new node to a quorum
#
# -> { "execute": "blockdev-add",
# "arguments": {
@@ -5899,7 +5929,8 @@
# "node": "new_node" } }
# <- { "return": {} }
#
-# 2. Delete a quorum's node
+# .. code-block:: QMP
+# :caption: Example: Delete a quorum's node
#
# -> { "execute": "x-blockdev-change",
# "arguments": { "parent": "disk1",
@@ -5935,16 +5966,16 @@
#
# Since: 2.12
#
-# Examples:
-#
-# 1. Move a node into an IOThread
+# .. code-block:: QMP
+# :caption: Example: Move a node into an IOThread
#
# -> { "execute": "x-blockdev-set-iothread",
# "arguments": { "node-name": "disk1",
# "iothread": "iothread0" } }
# <- { "return": {} }
#
-# 2. Move a node into the main loop
+# .. code-block:: QMP
+# :caption: Example: Move a node into the main loop
#
# -> { "execute": "x-blockdev-set-iothread",
# "arguments": { "node-name": "disk1",
@@ -5989,7 +6020,8 @@
#
# Since: 2.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "QUORUM_FAILURE",
# "data": { "reference": "usr1", "sector-num": 345435,
"sectors-count": 5 },
@@ -6020,16 +6052,16 @@
#
# Since: 2.0
#
-# Examples:
-#
-# 1. Read operation
+# .. code-block:: QMP
+# :caption: Example: Read operation
#
# <- { "event": "QUORUM_REPORT_BAD",
# "data": { "node-name": "node0", "sector-num": 345435,
"sectors-count": 5,
# "type": "read" },
# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
#
-# 2. Flush operation
+# .. code-block:: QMP
+# :caption: Example: Flush operation
#
# <- { "event": "QUORUM_REPORT_BAD",
# "data": { "node-name": "node0", "sector-num": 0, "sectors-count":
2097120,
@@ -6077,7 +6109,8 @@
#
# Since: 1.7
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-snapshot-internal-sync",
# "arguments": { "device": "ide-hd0",
@@ -6116,7 +6149,8 @@
#
# Since: 1.7
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-snapshot-delete-internal-sync",
# "arguments": { "device": "ide-hd0",
diff --git a/qapi/block.json b/qapi/block.json
index ea81d9e1921..c67bda708a2 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -117,7 +117,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "eject", "arguments": { "id": "ide1-0-1" } }
# <- { "return": {} }
@@ -161,7 +162,8 @@
#
# Since: 2.5
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-open-tray",
# "arguments": { "id": "ide0-1-0" } }
@@ -199,7 +201,8 @@
#
# Since: 2.5
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-close-tray",
# "arguments": { "id": "ide0-1-0" } }
@@ -231,7 +234,8 @@
#
# Since: 2.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-remove-medium",
# "arguments": { "id": "ide0-1-0" } }
@@ -272,7 +276,8 @@
#
# Since: 2.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "blockdev-add",
# "arguments": {
@@ -342,9 +347,8 @@
#
# Since: 2.5
#
-# Examples:
-#
-# 1. Change a removable medium
+# .. code-block:: QMP
+# :caption: Example: Change a removable medium
#
# -> { "execute": "blockdev-change-medium",
# "arguments": { "id": "ide0-1-0",
@@ -352,7 +356,8 @@
# "format": "raw" } }
# <- { "return": {} }
#
-# 2. Load a read-only medium into a writable drive
+# .. code-block:: QMP
+# :caption: Example: Load a read-only medium into a writable drive
#
# -> { "execute": "blockdev-change-medium",
# "arguments": { "id": "floppyA",
@@ -397,7 +402,8 @@
#
# Since: 1.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "DEVICE_TRAY_MOVED",
# "data": { "device": "ide1-cd0",
@@ -421,7 +427,8 @@
#
# Since: 3.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "PR_MANAGER_STATUS_CHANGED",
# "data": { "id": "pr-helper0",
@@ -463,7 +470,8 @@
#
# Since: 1.1
#
-# Examples:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "block_set_io_throttle",
# "arguments": { "id": "virtio-blk-pci0/virtio-backend",
@@ -483,6 +491,9 @@
# "iops_size": 0 } }
# <- { "return": {} }
#
+# .. code-block:: QMP
+# :caption: Example
+#
# -> { "execute": "block_set_io_throttle",
# "arguments": { "id": "ide0-1-0",
# "bps": 1000000,
@@ -543,29 +554,27 @@
#
# Since: 4.0
#
-# Example:
-#
-# Set new histograms for all io types with intervals
-# [0, 10), [10, 50), [50, 100), [100, +inf):
+# .. code-block:: QMP
+# :caption: Example:
+# Set new histograms for all io types with intervals
+# [0, 10), [10, 50), [50, 100), [100, +inf):
#
# -> { "execute": "block-latency-histogram-set",
# "arguments": { "id": "drive0",
# "boundaries": [10, 50, 100] } }
# <- { "return": {} }
#
-# Example:
-#
-# Set new histogram only for write, other histograms will remain
-# not changed (or not created):
+# .. code-block:: QMP
+# :caption: Example: Set new histogram only for write, other
+# histograms will remain not changed (or not created):
#
# -> { "execute": "block-latency-histogram-set",
# "arguments": { "id": "drive0",
# "boundaries-write": [10, 50, 100] } }
# <- { "return": {} }
#
-# Example:
-#
-# Set new histograms with the following intervals:
+# .. code-block:: QMP
+# :caption: Example: Set new histograms with the following intervals:
# read, flush: [0, 10), [10, 50), [50, 100), [100, +inf)
# write: [0, 1000), [1000, 5000), [5000, +inf)
#
@@ -575,9 +584,8 @@
# "boundaries-write": [1000, 5000] } }
# <- { "return": {} }
#
-# Example:
-#
-# Remove all latency histograms:
+# .. code-block:: QMP
+# :caption: Example: Remove all latency histograms:
#
# -> { "execute": "block-latency-histogram-set",
# "arguments": { "id": "drive0" } }
diff --git a/qapi/char.json b/qapi/char.json
index 5eabf8e7645..1001b902be8 100644
--- a/qapi/char.json
+++ b/qapi/char.json
@@ -40,7 +40,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-chardev" }
# <- {
@@ -86,7 +87,8 @@
#
# Since: 2.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-chardev-backends" }
# <- {
@@ -141,7 +143,8 @@
#
# Since: 1.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "ringbuf-write",
# "arguments": { "device": "foo",
@@ -177,7 +180,8 @@
#
# Since: 1.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "ringbuf-read",
# "arguments": { "device": "foo",
@@ -699,19 +703,26 @@
#
# Since: 1.4
#
-# Examples:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute" : "chardev-add",
# "arguments" : { "id" : "foo",
# "backend" : { "type" : "null", "data" : {} } } }
# <- { "return": {} }
#
+# .. code-block:: QMP
+# :caption: Example
+#
# -> { "execute" : "chardev-add",
# "arguments" : { "id" : "bar",
# "backend" : { "type" : "file",
# "data" : { "out" : "/tmp/bar.log" } }
} }
# <- { "return": {} }
#
+# .. code-block:: QMP
+# :caption: Example
+#
# -> { "execute" : "chardev-add",
# "arguments" : { "id" : "baz",
# "backend" : { "type" : "pty", "data" : {} } } }
@@ -735,13 +746,17 @@
#
# Since: 2.10
#
-# Examples:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute" : "chardev-change",
# "arguments" : { "id" : "baz",
# "backend" : { "type" : "pty", "data" : {} } } }
# <- { "return": { "pty" : "/dev/pty/42" } }
#
+# .. code-block:: QMP
+# :caption: Example
+#
# -> {"execute" : "chardev-change",
# "arguments" : {
# "id" : "charchannel2",
@@ -772,7 +787,8 @@
#
# Since: 1.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "chardev-remove", "arguments": { "id" : "foo" } }
# <- { "return": {} }
@@ -789,7 +805,8 @@
#
# Since: 2.10
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "chardev-send-break", "arguments": { "id" : "foo" } }
# <- { "return": {} }
@@ -810,7 +827,8 @@
#
# Since: 2.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "VSERPORT_CHANGE",
# "data": { "id": "channel0", "open": true },
diff --git a/qapi/control.json b/qapi/control.json
index fe2af45120b..938c94eb3ce 100644
--- a/qapi/control.json
+++ b/qapi/control.json
@@ -16,7 +16,8 @@
# the QMP greeting message. If the field is not provided, it
# means no QMP capabilities will be enabled. (since 2.12)
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "qmp_capabilities",
# "arguments": { "enable": [ "oob" ] } }
@@ -97,7 +98,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-version" }
# <- {
@@ -134,7 +136,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-commands" }
# <- {
@@ -165,7 +168,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "quit" }
# <- { "return": {} }
diff --git a/qapi/dump.json b/qapi/dump.json
index f9aee7ea1dd..758dc90755a 100644
--- a/qapi/dump.json
+++ b/qapi/dump.json
@@ -94,7 +94,8 @@
#
# Since: 1.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "dump-guest-memory",
# "arguments": { "paging": false, "protocol": "fd:dump" } }
@@ -150,7 +151,8 @@
#
# Since: 2.6
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-dump" }
# <- { "return": { "status": "active", "completed": 1024000,
@@ -171,7 +173,8 @@
#
# Since: 2.6
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "DUMP_COMPLETED",
# "data": { "result": { "total": 1090650112, "status": "completed",
@@ -202,7 +205,8 @@
#
# Since: 2.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-dump-guest-memory-capability" }
# <- { "return": { "formats":
diff --git a/qapi/machine-target.json b/qapi/machine-target.json
index a8d9ec87f59..5d31408abfa 100644
--- a/qapi/machine-target.json
+++ b/qapi/machine-target.json
@@ -475,7 +475,8 @@
#
# Since: 8.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "CPU_POLARIZATION_CHANGE",
# "data": { "polarization": "horizontal" },
diff --git a/qapi/machine.json b/qapi/machine.json
index 9870bc470e7..517d2247e6f 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -104,7 +104,8 @@
#
# Since: 2.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-cpus-fast" }
# <- { "return": [
@@ -221,7 +222,8 @@
#
# Since: 1.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-machines", "arguments": { "compat-props": true } }
# <- { "return": [
@@ -320,7 +322,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-uuid" }
# <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
@@ -354,7 +357,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "system_reset" }
# <- { "return": {} }
@@ -373,7 +377,8 @@
# request or that it has shut down. Many guests will respond to this
# command by prompting the user in some way.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "system_powerdown" }
# <- { "return": {} }
@@ -393,7 +398,8 @@
# .. note:: Prior to 4.0, this command does nothing in case the guest
# isn't suspended.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "system_wakeup" }
# <- { "return": {} }
@@ -444,7 +450,8 @@
# .. note:: Prior to 2.1, this command was only supported for x86 and
# s390 VMs
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "inject-nmi" }
# <- { "return": {} }
@@ -473,7 +480,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-kvm" }
# <- { "return": { "enabled": true, "present": true } }
@@ -842,7 +850,8 @@
#
# .. caution:: Errors were not reliably returned until 1.1.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "memsave",
# "arguments": { "val": 10,
@@ -868,7 +877,8 @@
#
# .. caution:: Errors were not reliably returned until 1.1.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "pmemsave",
# "arguments": { "val": 10,
@@ -929,7 +939,8 @@
#
# Since: 2.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-memdev" }
# <- { "return": [
@@ -1047,10 +1058,8 @@
#
# Since: 2.7
#
-# Examples:
-#
-# For pseries machine type started with -smp 2,cores=2,maxcpus=4
-# -cpu POWER8:
+# .. code-block:: QMP
+# :caption: Example: For pseries machine type started with ``-smp
2,cores=2,maxcpus=4 -cpu POWER8``:
#
# -> { "execute": "query-hotpluggable-cpus" }
# <- {"return": [
@@ -1060,7 +1069,8 @@
# "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]"}
# ]}
#
-# For pc machine type started with -smp 1,maxcpus=2:
+# .. code-block:: QMP
+# :caption: Example: For pc machine type started with ``-smp 1,maxcpus=2``:
#
# -> { "execute": "query-hotpluggable-cpus" }
# <- {"return": [
@@ -1075,8 +1085,8 @@
# }
# ]}
#
-# For s390x-virtio-ccw machine type started with -smp 1,maxcpus=2
-# -cpu qemu (Since: 2.11):
+# .. code-block:: QMP
+# :caption: Example: For s390x-virtio-ccw machine type started with ``-smp
1,maxcpus=2 -cpu qemu`` (Since: 2.11):
#
# -> { "execute": "query-hotpluggable-cpus" }
# <- {"return": [
@@ -1130,12 +1140,14 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "balloon", "arguments": { "value": 536870912 } }
# <- { "return": {} }
#
-# With a 2.5GiB guest this command inflated the ballon to 3GiB.
+# With a 2.5GiB guest this command inflated the ballon to 3GiB.
+#
##
{ 'command': 'balloon', 'data': {'value': 'int'} }
@@ -1166,7 +1178,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-balloon" }
# <- { "return": {
@@ -1190,7 +1203,8 @@
#
# Since: 1.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "BALLOON_CHANGE",
# "data": { "actual": 944766976 },
@@ -1232,7 +1246,8 @@
#
# Since: 8.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-hv-balloon-status-report" }
# <- { "return": {
@@ -1253,7 +1268,8 @@
#
# Since: 8.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "HV_BALLOON_STATUS_REPORT",
# "data": { "committed": 816640000, "available": 3333054464 },
@@ -1285,7 +1301,8 @@
# Return the amount of initially allocated and present hotpluggable
# (if enabled) memory in bytes.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-memory-size-summary" }
# <- { "return": { "base-memory": 4294967296, "plugged-memory": 0 } }
@@ -1564,7 +1581,8 @@
#
# Since: 2.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-memory-devices" }
# <- { "return": [ { "data":
@@ -1598,7 +1616,8 @@
#
# Since: 5.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "MEMORY_DEVICE_SIZE_CHANGE",
# "data": { "id": "vm0", "size": 1073741824,
@@ -1856,7 +1875,8 @@
#
# Since: 7.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "dumpdtb" }
# "arguments": { "filename": "fdt.dtb" } }
diff --git a/qapi/migration.json b/qapi/migration.json
index 85a14bb4308..849358b6387 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -283,14 +283,14 @@
#
# Since: 0.14
#
-# Examples:
-#
-# 1. Before the first migration
+# .. code-block:: QMP
+# :caption: Example: Before the first migration
#
# -> { "execute": "query-migrate" }
# <- { "return": {} }
#
-# 2. Migration is done and has succeeded
+# .. code-block:: QMP
+# :caption: Example: Migration is done and has succeeded
#
# -> { "execute": "query-migrate" }
# <- { "return": {
@@ -310,12 +310,14 @@
# }
# }
#
-# 3. Migration is done and has failed
+# .. code-block:: QMP
+# :caption: Example: Migration is done and has failed
#
# -> { "execute": "query-migrate" }
# <- { "return": { "status": "failed" } }
#
-# 4. Migration is being performed:
+# .. code-block:: QMP
+# :caption: Example: Migration is being performed
#
# -> { "execute": "query-migrate" }
# <- {
@@ -336,7 +338,35 @@
# }
# }
#
-# 5. Migration is being performed and XBZRLE is active:
+# .. code-block:: QMP
+# :caption: Example: Migration is being performed and XBZRLE is active
+#
+# -> { "execute": "query-migrate" }
+# <- {
+# "return":{
+# "status":"active",
+# "total-time":12345,
+# "setup-time":12345,
+# "expected-downtime":12345,
+# "ram":{
+# "total":1057024,
+# "remaining":1053304,
+# "transferred":3720,
+# "duplicate":123,
+# "normal":123,
+# "normal-bytes":123456,
+# "dirty-sync-count":15
+# },
+# "disk":{
+# "total":20971520,
+# "remaining":20880384,
+# "transferred":91136
+# }
+# }
+# }
+#
+# .. code-block:: QMP
+# :caption: Example: Migration is being performed and XBZRLE is active
#
# -> { "execute": "query-migrate" }
# <- {
@@ -510,7 +540,8 @@
#
# Since: 1.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "migrate-set-capabilities" , "arguments":
# { "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
@@ -528,7 +559,8 @@
#
# Since: 1.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-migrate-capabilities" }
# <- { "return": [
@@ -1039,7 +1071,8 @@
#
# Since: 2.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "migrate-set-parameters" ,
# "arguments": { "multifd-channels": 5 } }
@@ -1237,7 +1270,8 @@
#
# Since: 2.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-migrate-parameters" }
# <- { "return": {
@@ -1261,7 +1295,8 @@
#
# Since: 2.5
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "migrate-start-postcopy" }
# <- { "return": {} }
@@ -1277,7 +1312,8 @@
#
# Since: 2.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- {"timestamp": {"seconds": 1432121972, "microseconds": 744001},
# "event": "MIGRATION",
@@ -1296,7 +1332,8 @@
#
# Since: 2.6
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "timestamp": {"seconds": 1449669631, "microseconds": 239225},
# "event": "MIGRATION_PASS", "data": {"pass": 2} }
@@ -1380,7 +1417,8 @@
#
# Since: 3.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "timestamp": {"seconds": 2032141960, "microseconds": 417172},
# "event": "COLO_EXIT", "data": {"mode": "primary", "reason":
"request" } }
@@ -1423,7 +1461,8 @@
#
# Since: 2.8
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "x-colo-lost-heartbeat" }
# <- { "return": {} }
@@ -1442,7 +1481,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "migrate_cancel" }
# <- { "return": {} }
@@ -1458,7 +1498,8 @@
#
# Since: 2.11
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "migrate-continue" , "arguments":
# { "state": "pre-switchover" } }
@@ -1591,7 +1632,8 @@
# 6. The 'uri' and 'channels' arguments are mutually exclusive;
# exactly one of the two should be present.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
# <- { "return": {} }
@@ -1670,7 +1712,8 @@
# 5. The 'uri' and 'channels' arguments are mutually exclusive;
# exactly one of the two should be present.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "migrate-incoming",
# "arguments": { "uri": "tcp:0:4446" } }
@@ -1721,7 +1764,8 @@
#
# Since: 1.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "xen-save-devices-state",
# "arguments": { "filename": "/tmp/save" } }
@@ -1739,7 +1783,8 @@
#
# Since: 1.3
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "xen-set-global-dirty-log",
# "arguments": { "enable": true } }
@@ -1759,7 +1804,8 @@
#
# Since: 2.7
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "xen-load-devices-state",
# "arguments": { "filename": "/tmp/resume" } }
@@ -1779,7 +1825,8 @@
# @failover: true to do failover, false to stop. Cannot be specified
# if 'enable' is true. Default value is false.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "xen-set-replication",
# "arguments": {"enable": true, "primary": false} }
@@ -1814,7 +1861,8 @@
#
# Returns: A @ReplicationStatus object showing the status.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-xen-replication-status" }
# <- { "return": { "error": false } }
@@ -1830,7 +1878,8 @@
#
# Xen uses this command to notify replication to trigger a checkpoint.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "xen-colo-do-checkpoint" }
# <- { "return": {} }
@@ -1868,7 +1917,8 @@
#
# Returns: A @COLOStatus object showing the status.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-colo-status" }
# <- { "return": { "mode": "primary", "last-mode": "none", "reason":
"request" } }
@@ -1886,7 +1936,8 @@
#
# @uri: the URI to be used for the recovery of migration stream.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "migrate-recover",
# "arguments": { "uri": "tcp:192.168.1.200:12345" } }
@@ -1903,7 +1954,8 @@
#
# Pause a migration. Currently it only supports postcopy.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "migrate-pause" }
# <- { "return": {} }
@@ -1924,7 +1976,8 @@
#
# Since: 4.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "UNPLUG_PRIMARY",
# "data": { "device-id": "hostdev0" },
@@ -2084,13 +2137,15 @@
#
# Since: 5.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example:
#
# -> {"execute": "calc-dirty-rate", "arguments": {"calc-time": 1,
# "sample-pages": 512} }
# <- { "return": {} }
#
-# Measure dirty rate using dirty bitmap for 500 milliseconds:
+# .. code-block:: QMP
+# :caption: Example: Measure dirty rate using dirty bitmap for 500
milliseconds:
#
# -> {"execute": "calc-dirty-rate", "arguments": {"calc-time": 500,
# "calc-time-unit": "millisecond", "mode": "dirty-bitmap"} }
@@ -2112,15 +2167,15 @@
#
# Since: 5.2
#
-# Examples:
-#
-# 1. Measurement is in progress:
+# .. code-block:: QMP
+# :caption: Example: Measurement is in progress
#
# <- {"status": "measuring", "sample-pages": 512,
# "mode": "page-sampling", "start-time": 1693900454, "calc-time": 10,
# "calc-time-unit": "second"}
#
-# 2. Measurement has been completed:
+# .. code-block:: QMP
+# :caption: Example: Measurement has been completed
#
# <- {"status": "measured", "sample-pages": 512, "dirty-rate": 108,
# "mode": "page-sampling", "start-time": 1693900454, "calc-time": 10,
@@ -2163,7 +2218,8 @@
#
# Since: 7.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> {"execute": "set-vcpu-dirty-limit"}
# "arguments": { "dirty-rate": 200,
@@ -2187,7 +2243,8 @@
#
# Since: 7.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> {"execute": "cancel-vcpu-dirty-limit"},
# "arguments": { "cpu-index": 1 } }
@@ -2204,7 +2261,8 @@
#
# Since: 7.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> {"execute": "query-vcpu-dirty-limit"}
# <- {"return": [
@@ -2268,7 +2326,8 @@
#
# If @tag already exists, an error will be reported
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "snapshot-save",
# "arguments": {
@@ -2338,7 +2397,8 @@
# device nodes that can have changed since the original @snapshot-save
# command execution.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "snapshot-load",
# "arguments": {
@@ -2399,7 +2459,8 @@
# to determine completion and to fetch details of any errors that
# arise.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "snapshot-delete",
# "arguments": {
diff --git a/qapi/misc-target.json b/qapi/misc-target.json
index 2d7d4d89bd5..a60455c367d 100644
--- a/qapi/misc-target.json
+++ b/qapi/misc-target.json
@@ -11,7 +11,8 @@
#
# Since: 2.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "rtc-reset-reinjection" }
# <- { "return": {} }
@@ -133,7 +134,8 @@
#
# Since: 2.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-sev" }
# <- { "return": { "enabled": true, "api-major" : 0, "api-minor" : 0,
@@ -164,7 +166,8 @@
#
# Since: 2.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-sev-launch-measure" }
# <- { "return": { "data": "4l8LXeNlSPUDlXPJG5966/8%YZ" } }
@@ -209,7 +212,8 @@
#
# Since: 2.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-sev-capabilities" }
# <- { "return": { "pdh": "8CCDD8DDD", "cert-chain": "888CCCDDDEE",
@@ -263,7 +267,8 @@
#
# Since: 6.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute" : "query-sev-attestation-report",
# "arguments": { "mnonce": "aaaaaaa" } }
@@ -283,7 +288,8 @@
#
# Since: 2.5
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "dump-skeys",
# "arguments": { "filename": "/tmp/skeys" } }
@@ -328,7 +334,8 @@
#
# Since: 2.6
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-gic-capabilities" }
# <- { "return": [{ "version": 2, "emulated": true, "kernel": false },
@@ -386,7 +393,8 @@
#
# Since: 6.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-sgx" }
# <- { "return": { "sgx": true, "sgx1" : true, "sgx2" : true,
@@ -405,7 +413,8 @@
#
# Since: 6.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-sgx-capabilities" }
# <- { "return": { "sgx": true, "sgx1" : true, "sgx2" : true,
@@ -480,7 +489,8 @@
#
# Since: 8.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "xen-event-list" }
# <- { "return": [
@@ -518,7 +528,8 @@
#
# Since: 8.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "xen-event-inject", "arguments": { "port": 1 } }
# <- { "return": { } }
diff --git a/qapi/misc.json b/qapi/misc.json
index b04efbadec6..39bf8e30df1 100644
--- a/qapi/misc.json
+++ b/qapi/misc.json
@@ -30,7 +30,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "add_client", "arguments": { "protocol": "vnc",
# "fdname": "myclient" } }
@@ -60,7 +61,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-name" }
# <- { "return": { "name": "qemu-name" } }
@@ -111,7 +113,8 @@
#
# Since: 2.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-iothreads" }
# <- { "return": [
@@ -144,7 +147,8 @@
# In the "suspended" state, it will completely stop the VM and cause
# a transition to the "paused" state. (Since 9.0)
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "stop" }
# <- { "return": {} }
@@ -168,7 +172,8 @@
# this command will transition back to the "suspended" state. (Since
# 9.0)
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "cont" }
# <- { "return": {} }
@@ -192,7 +197,8 @@
#
# Since: 3.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "x-exit-preconfig" }
# <- { "return": {} }
@@ -232,7 +238,8 @@
#
# * Commands that prompt the user for data don't currently work.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "human-monitor-command",
# "arguments": { "command-line": "info kvm" } }
@@ -258,7 +265,8 @@
# The 'closefd' command can be used to explicitly close the file
# descriptor when it is no longer needed.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "getfd", "arguments": { "fdname": "fd1" } }
# <- { "return": {} }
@@ -285,7 +293,8 @@
# The 'closefd' command can be used to explicitly close the file
# descriptor when it is no longer needed.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "get-win32-socket",
# "arguments": { "info": "abcd123..", "fdname": "skclient" } }
@@ -302,7 +311,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "closefd", "arguments": { "fdname": "fd1" } }
# <- { "return": {} }
@@ -345,7 +355,8 @@
#
# Since: 1.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } }
# <- { "return": { "fdset-id": 1, "fd": 3 } }
@@ -374,7 +385,8 @@
# .. note:: If @fd is not specified, all file descriptors in @fdset-id
# will be removed.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } }
# <- { "return": {} }
@@ -420,7 +432,8 @@
#
# .. note:: The list of fd sets is shared by all monitor connections.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-fdsets" }
# <- { "return": [
@@ -523,7 +536,8 @@
#
# Since: 1.5
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-command-line-options",
# "arguments": { "option": "option-rom" } }
@@ -565,7 +579,8 @@
#
# Since: 0.13
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "RTC_CHANGE",
# "data": { "offset": 78 },
@@ -592,7 +607,8 @@
#
# Since: 7.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "VFU_CLIENT_HANGUP",
# "data": { "vfu-id": "vfu1",
diff --git a/qapi/net.json b/qapi/net.json
index dd6c365c34d..3110d635f46 100644
--- a/qapi/net.json
+++ b/qapi/net.json
@@ -26,7 +26,8 @@
# command will succeed even if the network adapter does not support
# link status notification.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "set_link",
# "arguments": { "name": "e1000.0", "up": false } }
@@ -46,7 +47,8 @@
# Errors:
# - If @type is not a valid network backend, DeviceNotFound
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "netdev_add",
# "arguments": { "type": "user", "id": "netdev1",
@@ -68,7 +70,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } }
# <- { "return": {} }
@@ -836,7 +839,8 @@
#
# Since: 1.6
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-rx-filter", "arguments": { "name": "vnet0" } }
# <- { "return": [
@@ -881,7 +885,8 @@
#
# Since: 1.6
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "NIC_RX_FILTER_CHANGED",
# "data": { "name": "vnet0",
@@ -930,7 +935,8 @@
# switches. This can be useful when network bonds fail-over the
# active slave.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "announce-self",
# "arguments": {
@@ -955,7 +961,8 @@
#
# Since: 4.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "FAILOVER_NEGOTIATED",
# "data": { "device-id": "net1" },
@@ -975,7 +982,8 @@
#
# Since: 7.2
#
-# Examples:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "NETDEV_STREAM_CONNECTED",
# "data": { "netdev-id": "netdev0",
@@ -983,6 +991,9 @@
# "host": "::1", "type": "inet" } },
# "timestamp": { "seconds": 1666269863, "microseconds": 311222 } }
#
+# .. code-block:: QMP
+# :caption: Example
+#
# <- { "event": "NETDEV_STREAM_CONNECTED",
# "data": { "netdev-id": "netdev0",
# "addr": { "path": "/tmp/qemu0", "type": "unix" } },
@@ -1001,7 +1012,8 @@
#
# Since: 7.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "NETDEV_STREAM_DISCONNECTED",
# "data": {"netdev-id": "netdev0"},
diff --git a/qapi/pci.json b/qapi/pci.json
index f51159a2c4c..9192212661b 100644
--- a/qapi/pci.json
+++ b/qapi/pci.json
@@ -182,7 +182,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-pci" }
# <- { "return": [
@@ -311,8 +312,7 @@
# ]
# }
#
-# Note: This example has been shortened as the real response is too
-# long.
+# This example has been shortened as the real response is too long.
#
##
{ 'command': 'query-pci', 'returns': ['PciInfo'] }
diff --git a/qapi/qapi-schema.json b/qapi/qapi-schema.json
index b1581988e4e..17a5afaacb8 100644
--- a/qapi/qapi-schema.json
+++ b/qapi/qapi-schema.json
@@ -20,11 +20,7 @@
# understand. However, in real protocol usage, they're emitted as a
# single line.
#
-# Also, the following notation is used to denote data flow:
-#
-# Example:
-#
-# ::
+# Also, the following notation is used to denote data flow::
#
# -> data issued by the Client
# <- Server data response
diff --git a/qapi/qdev.json b/qapi/qdev.json
index d031fc3590d..cfe403fea20 100644
--- a/qapi/qdev.json
+++ b/qapi/qdev.json
@@ -62,7 +62,8 @@
# the ``-device DEVICE,help`` command-line argument, where DEVICE
# is the device's name.
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "device_add",
# "arguments": { "driver": "e1000", "id": "net1",
@@ -104,12 +105,16 @@
#
# Since: 0.14
#
-# Examples:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "device_del",
# "arguments": { "id": "net1" } }
# <- { "return": {} }
#
+# .. code-block:: QMP
+# :caption: Example
+#
# -> { "execute": "device_del",
# "arguments": { "id": "/machine/peripheral-anon/device[0]" } }
# <- { "return": {} }
@@ -130,7 +135,8 @@
#
# Since: 1.5
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "DEVICE_DELETED",
# "data": { "device": "virtio-net-pci-0",
@@ -152,7 +158,8 @@
#
# Since: 6.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "DEVICE_UNPLUG_GUEST_ERROR",
# "data": { "device": "core1",
diff --git a/qapi/qom.json b/qapi/qom.json
index 5bfa0ded42c..f12a90a2541 100644
--- a/qapi/qom.json
+++ b/qapi/qom.json
@@ -59,7 +59,8 @@
#
# Since: 1.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "qom-list",
# "arguments": { "path": "/chardevs" } }
@@ -104,16 +105,16 @@
#
# Since: 1.2
#
-# Examples:
-#
-# 1. Use absolute path
+# .. code-block:: QMP
+# :caption: Example: Use absolute path
#
# -> { "execute": "qom-get",
# "arguments": { "path": "/machine/unattached/device[0]",
# "property": "hotplugged" } }
# <- { "return": false }
#
-# 2. Use partial path
+# .. code-block:: QMP
+# :caption: Example: Use partial path
#
# -> { "execute": "qom-get",
# "arguments": { "path": "unattached/sysbus",
@@ -139,7 +140,8 @@
#
# Since: 1.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "qom-set",
# "arguments": { "path": "/machine",
@@ -1154,7 +1156,8 @@
#
# Since: 2.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "object-add",
# "arguments": { "qom-type": "rng-random", "id": "rng1",
@@ -1176,7 +1179,8 @@
#
# Since: 2.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "object-del", "arguments": { "id": "rng1" } }
# <- { "return": {} }
diff --git a/qapi/replay.json b/qapi/replay.json
index d3559f9c8f7..f0351b6d9c1 100644
--- a/qapi/replay.json
+++ b/qapi/replay.json
@@ -54,7 +54,8 @@
#
# Since: 5.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-replay" }
# <- { "return": { "mode": "play", "filename": "log.rr", "icount": 220414
} }
@@ -76,7 +77,8 @@
#
# Since: 5.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "replay-break", "arguments": { "icount": 220414 } }
# <- { "return": {} }
@@ -91,7 +93,8 @@
#
# Since: 5.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "replay-delete-break" }
# <- { "return": {} }
@@ -112,7 +115,8 @@
#
# Since: 5.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "replay-seek", "arguments": { "icount": 220414 } }
# <- { "return": {} }
diff --git a/qapi/rocker.json b/qapi/rocker.json
index 9f95e638309..da5cc2b9e01 100644
--- a/qapi/rocker.json
+++ b/qapi/rocker.json
@@ -30,7 +30,8 @@
#
# Since: 2.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-rocker", "arguments": { "name": "sw1" } }
# <- { "return": {"name": "sw1", "ports": 2, "id": 1327446905938}}
@@ -98,7 +99,8 @@
#
# Since: 2.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-rocker-ports", "arguments": { "name": "sw1" } }
# <- { "return": [ {"duplex": "full", "enabled": true, "name": "sw1.1",
@@ -240,7 +242,8 @@
#
# Since: 2.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-rocker-of-dpa-flows",
# "arguments": { "name": "sw1" } }
@@ -315,7 +318,8 @@
#
# Since: 2.4
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-rocker-of-dpa-groups",
# "arguments": { "name": "sw1" } }
diff --git a/qapi/run-state.json b/qapi/run-state.json
index 252d7d6afa7..6b0322de4d7 100644
--- a/qapi/run-state.json
+++ b/qapi/run-state.json
@@ -123,7 +123,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-status" }
# <- { "return": { "running": true,
@@ -152,7 +153,8 @@
#
# Since: 0.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "SHUTDOWN",
# "data": { "guest": true, "reason": "guest-shutdown" },
@@ -168,7 +170,8 @@
#
# Since: 0.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "POWERDOWN",
# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
@@ -189,7 +192,8 @@
#
# Since: 0.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "RESET",
# "data": { "guest": false, "reason": "guest-reset" },
@@ -204,7 +208,8 @@
#
# Since: 0.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "STOP",
# "timestamp": { "seconds": 1267041730, "microseconds": 281295 } }
@@ -218,7 +223,8 @@
#
# Since: 0.12
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "RESUME",
# "timestamp": { "seconds": 1271770767, "microseconds": 582542 } }
@@ -233,7 +239,8 @@
#
# Since: 1.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "SUSPEND",
# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
@@ -252,7 +259,8 @@
#
# Since: 1.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "SUSPEND_DISK",
# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
@@ -267,7 +275,8 @@
#
# Since: 1.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "WAKEUP",
# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
@@ -289,7 +298,8 @@
#
# Since: 0.13
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "WATCHDOG",
# "data": { "action": "reset" },
@@ -382,7 +392,8 @@
#
# Since: 2.11
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "watchdog-set-action",
# "arguments": { "action": "inject-nmi" } }
@@ -406,7 +417,8 @@
#
# Since: 6.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "set-action",
# "arguments": { "reboot": "shutdown",
@@ -433,7 +445,8 @@
#
# Since: 1.5
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "GUEST_PANICKED",
# "data": { "action": "pause" },
@@ -453,7 +466,8 @@
#
# Since: 5.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "GUEST_CRASHLOADED",
# "data": { "action": "run" },
@@ -597,7 +611,8 @@
#
# Since: 5.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "MEMORY_FAILURE",
# "data": { "recipient": "hypervisor",
diff --git a/qapi/tpm.json b/qapi/tpm.json
index 1577b5c259d..07b7b5bd9fd 100644
--- a/qapi/tpm.json
+++ b/qapi/tpm.json
@@ -31,7 +31,8 @@
#
# Since: 1.5
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-tpm-models" }
# <- { "return": [ "tpm-tis", "tpm-crb", "tpm-spapr" ] }
@@ -62,7 +63,8 @@
#
# Since: 1.5
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-tpm-types" }
# <- { "return": [ "passthrough", "emulator" ] }
@@ -168,7 +170,8 @@
#
# Since: 1.5
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-tpm" }
# <- { "return":
diff --git a/qapi/trace.json b/qapi/trace.json
index 9ebb6d9eaf5..dededbb809e 100644
--- a/qapi/trace.json
+++ b/qapi/trace.json
@@ -51,7 +51,8 @@
#
# Since: 2.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "trace-event-get-state",
# "arguments": { "name": "qemu_memalign" } }
@@ -74,7 +75,8 @@
#
# Since: 2.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "trace-event-set-state",
# "arguments": { "name": "qemu_memalign", "enable": true } }
diff --git a/qapi/transaction.json b/qapi/transaction.json
index bcb05fdedd6..3f06ce9c1c6 100644
--- a/qapi/transaction.json
+++ b/qapi/transaction.json
@@ -244,7 +244,8 @@
#
# Since: 1.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "transaction",
# "arguments": { "actions": [
diff --git a/qapi/ui.json b/qapi/ui.json
index 5bcccbfc930..2255e9cb60f 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -83,7 +83,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "set_password", "arguments": { "protocol": "vnc",
# "password": "secret" } }
@@ -144,7 +145,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
# "time": "+60" } }
@@ -186,7 +188,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "screendump",
# "arguments": { "filename": "/tmp/image" } }
@@ -330,7 +333,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-spice" }
# <- { "return": {
@@ -379,7 +383,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
# "event": "SPICE_CONNECTED",
@@ -405,7 +410,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
# "event": "SPICE_INITIALIZED",
@@ -432,7 +438,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
# "event": "SPICE_DISCONNECTED",
@@ -453,7 +460,8 @@
#
# Since: 1.3
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
# "event": "SPICE_MIGRATE_COMPLETED" }
@@ -661,7 +669,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-vnc" }
# <- { "return": {
@@ -726,7 +735,8 @@
#
# Since: 0.13
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "VNC_CONNECTED",
# "data": {
@@ -753,7 +763,8 @@
#
# Since: 0.13
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "VNC_INITIALIZED",
# "data": {
@@ -779,7 +790,8 @@
#
# Since: 0.13
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "event": "VNC_DISCONNECTED",
# "data": {
@@ -827,7 +839,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-mice" }
# <- { "return": [
@@ -1036,7 +1049,8 @@
#
# Since: 1.3
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "send-key",
# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
@@ -1272,9 +1286,8 @@
# property, so it is possible to map which console belongs to which
# device and display.
#
-# Examples:
-#
-# 1. Press left mouse button.
+# .. code-block:: QMP
+# :caption: Example: Press left mouse button.
#
# -> { "execute": "input-send-event",
# "arguments": { "device": "video0",
@@ -1288,7 +1301,8 @@
# "data" : { "down": false, "button": "left" } } ] } }
# <- { "return": {} }
#
-# 2. Press ctrl-alt-del.
+# .. code-block:: QMP
+# :caption: Example: Press ctrl-alt-del.
#
# -> { "execute": "input-send-event",
# "arguments": { "events": [
@@ -1300,7 +1314,8 @@
# "key": {"type": "qcode", "data": "delete" } } } ] } }
# <- { "return": {} }
#
-# 3. Move mouse pointer to absolute coordinates (20000, 400).
+# .. code-block:: QMP
+# :caption: Example: Move mouse pointer to absolute coordinates (20000,
400).
#
# -> { "execute": "input-send-event" ,
# "arguments": { "events": [
@@ -1615,7 +1630,8 @@
#
# Since: 6.0
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "display-reload",
# "arguments": { "type": "vnc", "tls-certs": true } }
@@ -1672,7 +1688,8 @@
#
# Since: 7.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "display-update",
# "arguments": { "type": "vnc", "addresses":
@@ -1703,7 +1720,8 @@
#
# Since: 0.14
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "client_migrate_info",
# "arguments": { "protocol": "spice",
diff --git a/qapi/vfio.json b/qapi/vfio.json
index a0e5013188a..2be5b9442b8 100644
--- a/qapi/vfio.json
+++ b/qapi/vfio.json
@@ -50,7 +50,8 @@
#
# Since: 9.1
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# <- { "timestamp": { "seconds": 1713771323, "microseconds": 212268 },
# "event": "VFIO_MIGRATION",
diff --git a/qapi/virtio.json b/qapi/virtio.json
index b91f3cdd0df..adf5def9dd6 100644
--- a/qapi/virtio.json
+++ b/qapi/virtio.json
@@ -34,7 +34,8 @@
#
# Since: 7.2
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "x-query-virtio" }
# <- { "return": [
@@ -203,9 +204,8 @@
#
# Since: 7.2
#
-# Examples:
-#
-# 1. Poll for the status of virtio-crypto (no vhost-crypto active)
+# .. code-block:: QMP
+# :caption: Example: Poll for the status of virtio-crypto (no vhost-crypto
active)
#
# -> { "execute": "x-query-virtio-status",
# "arguments": { "path": "/machine/peripheral/crypto0/virtio-backend"
}
@@ -261,7 +261,8 @@
# }
# }
#
-# 2. Poll for the status of virtio-net (vhost-net is active)
+# .. code-block:: QMP
+# :caption: Example: Poll for the status of virtio-net (vhost-net is active)
#
# -> { "execute": "x-query-virtio-status",
# "arguments": { "path":
"/machine/peripheral-anon/device[1]/virtio-backend" }
@@ -568,9 +569,8 @@
#
# Since: 7.2
#
-# Examples:
-#
-# 1. Get VirtQueueStatus for virtio-vsock (vhost-vsock running)
+# .. code-block:: QMP
+# :caption: Example: Get VirtQueueStatus for virtio-vsock (vhost-vsock
running)
#
# -> { "execute": "x-query-virtio-queue-status",
# "arguments": { "path": "/machine/peripheral/vsock0/virtio-backend",
@@ -593,7 +593,8 @@
# }
# }
#
-# 2. Get VirtQueueStatus for virtio-serial (no vhost)
+# .. code-block:: QMP
+# :caption: Example: Get VirtQueueStatus for virtio-serial (no vhost)
#
# -> { "execute": "x-query-virtio-queue-status",
# "arguments": { "path":
"/machine/peripheral-anon/device[0]/virtio-backend",
@@ -690,9 +691,8 @@
#
# Since: 7.2
#
-# Examples:
-#
-# 1. Get vhost_virtqueue status for vhost-crypto
+# .. code-block:: QMP
+# :caption: Example: Get vhost_virtqueue status for vhost-crypto
#
# -> { "execute": "x-query-virtio-vhost-queue-status",
# "arguments": { "path": "/machine/peripheral/crypto0/virtio-backend",
@@ -715,7 +715,8 @@
# }
# }
#
-# 2. Get vhost_virtqueue status for vhost-vsock
+# .. code-block:: QMP
+# :caption: Example: Get vhost_virtqueue status for vhost-vsock
#
# -> { "execute": "x-query-virtio-vhost-queue-status",
# "arguments": { "path": "/machine/peripheral/vsock0/virtio-backend",
@@ -839,9 +840,8 @@
#
# Since: 7.2
#
-# Examples:
-#
-# 1. Introspect on virtio-net's VirtQueue 0 at index 5
+# .. code-block:: QMP
+# :caption: Example: Introspect on virtio-net's VirtQueue 0 at index 5
#
# -> { "execute": "x-query-virtio-queue-element",
# "arguments": { "path":
"/machine/peripheral-anon/device[1]/virtio-backend",
@@ -870,7 +870,8 @@
# }
# }
#
-# 2. Introspect on virtio-crypto's VirtQueue 1 at head
+# .. code-block:: QMP
+# :caption: Example: Introspect on virtio-crypto's VirtQueue 1 at head
#
# -> { "execute": "x-query-virtio-queue-element",
# "arguments": { "path": "/machine/peripheral/crypto0/virtio-backend",
@@ -898,7 +899,8 @@
# }
# }
#
-# 3. Introspect on virtio-scsi's VirtQueue 2 at head
+# .. code-block:: QMP
+# :caption: Example: Introspect on virtio-scsi's VirtQueue 2 at head
#
# -> { "execute": "x-query-virtio-queue-element",
# "arguments": { "path":
"/machine/peripheral-anon/device[2]/virtio-backend",
diff --git a/qapi/yank.json b/qapi/yank.json
index 89f2f4d199b..a64b77e846c 100644
--- a/qapi/yank.json
+++ b/qapi/yank.json
@@ -81,7 +81,8 @@
# Errors:
# - If any of the YankInstances doesn't exist, DeviceNotFound
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "yank",
# "arguments": {
@@ -104,7 +105,8 @@
#
# Returns: list of @YankInstance
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example
#
# -> { "execute": "query-yank" }
# <- { "return": [
diff --git a/scripts/qapi/parser.py b/scripts/qapi/parser.py
index 971fdf61a09..14de6f460d0 100644
--- a/scripts/qapi/parser.py
+++ b/scripts/qapi/parser.py
@@ -554,7 +554,7 @@ def get_doc(self) -> 'QAPIDoc':
# Note: "sections" with two colons are left alone as
# rST markup and not interpreted as a section heading.
- # TODO: Remove this error sometime in 2025 or so
+ # TODO: Remove these errors sometime in 2025 or so
# after we've fully transitioned to the new qapidoc
# generator.
@@ -568,6 +568,15 @@ def get_doc(self) -> 'QAPIDoc':
)
raise QAPIParseError(self, emsg)
+ if 'Example' in match.group(1):
+ emsg = (
+ f"The '{match.group(1)}' section is no longer "
+ "supported. Please use rST's "
+ "'.. code-block:: QMP' directive, 'Example::', "
+ "or other suitable markup instead."
+ )
+ raise QAPIParseError(self, emsg)
+
doc.new_tagged_section(self.info, match.group(1))
text = line[match.end():]
if text:
diff --git a/tests/qapi-schema/doc-good.json b/tests/qapi-schema/doc-good.json
index 4b338cc0186..2774a7ce14d 100644
--- a/tests/qapi-schema/doc-good.json
+++ b/tests/qapi-schema/doc-good.json
@@ -46,11 +46,13 @@
#
# Duis aute irure dolor
#
-# Example:
+# .. code-block:: QMP
+# :caption: Example:
#
# -> in
# <- out
-# Examples:
+# .. code-block::
+#
# - *verbatim*
# - {braces}
##
@@ -172,12 +174,13 @@
#
# Duis aute irure dolor
#
-# Example:
+# .. code-block::
#
# -> in
# <- out
#
-# Examples:
+# .. code-block::
+#
# - *verbatim*
# - {braces}
#
@@ -196,7 +199,7 @@
# @cmd-feat1: a feature
# @cmd-feat2: another feature
#
-# Example:
+# .. code-block::
#
# -> in
#
diff --git a/tests/qapi-schema/doc-good.out b/tests/qapi-schema/doc-good.out
index 2c9b4e419cb..347b9cb7134 100644
--- a/tests/qapi-schema/doc-good.out
+++ b/tests/qapi-schema/doc-good.out
@@ -93,11 +93,13 @@ Notes:
Duis aute irure dolor
-Example:
+.. code-block:: QMP
+ :caption: Example:
-> in
<- out
-Examples:
+.. code-block::
+
- *verbatim*
- {braces}
doc symbol=Enum
@@ -184,10 +186,14 @@ frobnicate
- Ut enim ad minim veniam
Duis aute irure dolor
- section=Example
+
+.. code-block::
+
-> in
<- out
- section=Examples
+
+.. code-block::
+
- *verbatim*
- {braces}
section=Since
@@ -199,7 +205,9 @@ If you're bored enough to read this, go see a video of
boxed cats
a feature
feature=cmd-feat2
another feature
- section=Example
+ section=None
+.. code-block::
+
-> in
<- out
diff --git a/tests/qapi-schema/doc-good.txt b/tests/qapi-schema/doc-good.txt
index b89f35d5476..1bd31f0938d 100644
--- a/tests/qapi-schema/doc-good.txt
+++ b/tests/qapi-schema/doc-good.txt
@@ -35,7 +35,10 @@ Duis aute irure dolor
Example:
--> in <- out Examples: - *verbatim* - {braces}
+-> in <- out .. code-block:
+
+ - *verbatim*
+ - {braces}
"Enum" (Enum)
@@ -219,17 +222,9 @@ Notes:
Duis aute irure dolor
-
-Example
-~~~~~~~
-
-> in
<- out
-
-Examples
-~~~~~~~~
-
- *verbatim*
- {braces}
@@ -260,10 +255,6 @@ Features
"cmd-feat2"
another feature
-
-Example
-~~~~~~~
-
-> in
<- out
--
2.44.0
- Re: [PATCH 09/13] qapi: convert "Note" sections to plain rST, (continued)
Re: [PATCH 09/13] qapi: convert "Note" sections to plain rST, Markus Armbruster, 2024/06/20
Re: [PATCH 09/13] qapi: convert "Note" sections to plain rST, Markus Armbruster, 2024/06/21
[PATCH 11/13] qapi: add markup to note blocks, John Snow, 2024/06/18
[PATCH 12/13] qapi/parser: don't parse rST markup as section headers, John Snow, 2024/06/18
[PATCH 13/13] qapi: convert "Example" sections to rST,
John Snow <=
Re: [PATCH 00/13] qapi: convert "Note" and "Example" sections to rST, Markus Armbruster, 2024/06/26