[PATCH v2 7/9] qapi: convert "Example" sections with titles

[John Snow]

When an Example section has a brief explanation, convert it to a
qmp-example:: section using the :title: option.

Rule of thumb: If the title can fit on a single line and requires no rST
markup, it's a good candidate for using the :title: option of
qmp-example.

In this patch, trailing punctuation is removed from the title section
for consistent headline aesthetics. In just one case, specifics of the
example are removed to make the title read better.

See commit-4: "docs/qapidoc: create qmp-example directive", for a
              detailed explanation of this custom directive syntax.

See commit+2: "qapi: remove "Example" doc section" for a detailed
              explanation of why.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/block-core.json | 24 ++++++++++++------------
 qapi/block.json      | 13 ++++++-------
 qapi/migration.json  | 25 ++++++++++++++-----------
 qapi/qom.json        |  8 ++++----
 qapi/ui.json         | 11 ++++++-----
 qapi/virtio.json     | 19 ++++++++++---------
 6 files changed, 52 insertions(+), 48 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 84a020aa9e3..f400b334c84 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -5881,9 +5881,8 @@
 #
 # Since: 2.7
 #
-# Examples:
-#
-#     1. Add a new node to a quorum
+# .. qmp-example::
+#    :title: Add a new node to a quorum
 #
 #     -> { "execute": "blockdev-add",
 #          "arguments": {
@@ -5897,7 +5896,8 @@
 #                         "node": "new_node" } }
 #     <- { "return": {} }
 #
-#     2. Delete a quorum's node
+# .. qmp-example::
+#    :title: Delete a quorum's node
 #
 #     -> { "execute": "x-blockdev-change",
 #          "arguments": { "parent": "disk1",
@@ -5933,16 +5933,16 @@
 #
 # Since: 2.12
 #
-# Examples:
-#
-#     1. Move a node into an IOThread
+# .. qmp-example::
+#    :title: Move a node into an IOThread
 #
 #     -> { "execute": "x-blockdev-set-iothread",
 #          "arguments": { "node-name": "disk1",
 #                         "iothread": "iothread0" } }
 #     <- { "return": {} }
 #
-#     2. Move a node into the main loop
+# .. qmp-example::
+#    :title: Move a node into the main loop
 #
 #     -> { "execute": "x-blockdev-set-iothread",
 #          "arguments": { "node-name": "disk1",
@@ -6018,16 +6018,16 @@
 #
 # Since: 2.0
 #
-# Examples:
-#
-#     1. Read operation
+# .. qmp-example::
+#    :title: Read operation
 #
 #     <- { "event": "QUORUM_REPORT_BAD",
 #          "data": { "node-name": "node0", "sector-num": 345435, 
"sectors-count": 5,
 #                    "type": "read" },
 #          "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
 #
-#     2. Flush operation
+# .. qmp-example::
+#    :title: Flush operation
 #
 #     <- { "event": "QUORUM_REPORT_BAD",
 #          "data": { "node-name": "node0", "sector-num": 0, "sectors-count": 
2097120,
diff --git a/qapi/block.json b/qapi/block.json
index c8e52bc2d29..5ddd061e964 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -342,9 +342,8 @@
 #
 # Since: 2.5
 #
-# Examples:
-#
-#     1. Change a removable medium
+# .. qmp-example::
+#    :title: Change a removable medium
 #
 #     -> { "execute": "blockdev-change-medium",
 #          "arguments": { "id": "ide0-1-0",
@@ -352,7 +351,8 @@
 #                         "format": "raw" } }
 #     <- { "return": {} }
 #
-#     2. Load a read-only medium into a writable drive
+# .. qmp-example::
+#    :title: Load a read-only medium into a writable drive
 #
 #     -> { "execute": "blockdev-change-medium",
 #          "arguments": { "id": "floppyA",
@@ -577,9 +577,8 @@
 #                         "boundaries-write": [1000, 5000] } }
 #     <- { "return": {} }
 #
-# Example:
-#
-#     Remove all latency histograms:
+# .. qmp-example::
+#    :title: Remove all latency histograms
 #
 #     -> { "execute": "block-latency-histogram-set",
 #          "arguments": { "id": "drive0" } }
diff --git a/qapi/migration.json b/qapi/migration.json
index 3c657202389..74968a14173 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -287,14 +287,14 @@
 #
 # Since: 0.14
 #
-# Examples:
-#
-#     1. Before the first migration
+# .. qmp-example::
+#    :title: Before the first migration
 #
 #     -> { "execute": "query-migrate" }
 #     <- { "return": {} }
 #
-#     2. Migration is done and has succeeded
+# .. qmp-example::
+#    :title: Migration is done and has succeeded
 #
 #     -> { "execute": "query-migrate" }
 #     <- { "return": {
@@ -314,12 +314,14 @@
 #          }
 #        }
 #
-#     3. Migration is done and has failed
+# .. qmp-example::
+#    :title: Migration is done and has failed
 #
 #     -> { "execute": "query-migrate" }
 #     <- { "return": { "status": "failed" } }
 #
-#     4. Migration is being performed:
+# .. qmp-example::
+#    :title: Migration is being performed
 #
 #     -> { "execute": "query-migrate" }
 #     <- {
@@ -340,7 +342,8 @@
 #           }
 #        }
 #
-#     5. Migration is being performed and XBZRLE is active:
+# .. qmp-example::
+#    :title: Migration is being performed and XBZRLE is active
 #
 #     -> { "execute": "query-migrate" }
 #     <- {
@@ -2131,15 +2134,15 @@
 #
 # Since: 5.2
 #
-# Examples:
-#
-#     1. Measurement is in progress:
+# .. qmp-example::
+#    :title: Measurement is in progress
 #
 #     <- {"status": "measuring", "sample-pages": 512,
 #         "mode": "page-sampling", "start-time": 1693900454, "calc-time": 10,
 #         "calc-time-unit": "second"}
 #
-#     2. Measurement has been completed:
+# .. qmp-example::
+#    :title: Measurement has been completed
 #
 #     <- {"status": "measured", "sample-pages": 512, "dirty-rate": 108,
 #         "mode": "page-sampling", "start-time": 1693900454, "calc-time": 10,
diff --git a/qapi/qom.json b/qapi/qom.json
index 544e0a4b736..c9dbb89fb60 100644
--- a/qapi/qom.json
+++ b/qapi/qom.json
@@ -104,16 +104,16 @@
 #
 # Since: 1.2
 #
-# Examples:
-#
-#     1. Use absolute path
+# .. qmp-example::
+#    :title: Use absolute path
 #
 #     -> { "execute": "qom-get",
 #          "arguments": { "path": "/machine/unattached/device[0]",
 #                         "property": "hotplugged" } }
 #     <- { "return": false }
 #
-#     2. Use partial path
+# .. qmp-example::
+#    :title: Use partial path
 #
 #     -> { "execute": "qom-get",
 #          "arguments": { "path": "unattached/sysbus",
diff --git a/qapi/ui.json b/qapi/ui.json
index c0e94fd0ed0..779b472f064 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -1272,9 +1272,8 @@
 #    property, so it is possible to map which console belongs to which
 #    device and display.
 #
-# Examples:
-#
-#     1. Press left mouse button.
+# .. qmp-example::
+#    :title: Press left mouse button
 #
 #     -> { "execute": "input-send-event",
 #         "arguments": { "device": "video0",
@@ -1288,7 +1287,8 @@
 #                        "data" : { "down": false, "button": "left" } } ] } }
 #     <- { "return": {} }
 #
-#     2. Press ctrl-alt-del.
+# .. qmp-example::
+#    :title: Press ctrl-alt-del
 #
 #     -> { "execute": "input-send-event",
 #          "arguments": { "events": [
@@ -1300,7 +1300,8 @@
 #               "key": {"type": "qcode", "data": "delete" } } } ] } }
 #     <- { "return": {} }
 #
-#     3. Move mouse pointer to absolute coordinates (20000, 400).
+# .. qmp-example::
+#    :title: Move mouse pointer to absolute coordinates
 #
 #     -> { "execute": "input-send-event" ,
 #       "arguments": { "events": [
diff --git a/qapi/virtio.json b/qapi/virtio.json
index f4323cc35e8..d965c98ad2b 100644
--- a/qapi/virtio.json
+++ b/qapi/virtio.json
@@ -690,9 +690,8 @@
 #
 # Since: 7.2
 #
-# Examples:
-#
-#     1. Get vhost_virtqueue status for vhost-crypto
+# .. qmp-example::
+#    :title: Get vhost_virtqueue status for vhost-crypto
 #
 #     -> { "execute": "x-query-virtio-vhost-queue-status",
 #          "arguments": { "path": "/machine/peripheral/crypto0/virtio-backend",
@@ -715,7 +714,8 @@
 #          }
 #        }
 #
-#     2. Get vhost_virtqueue status for vhost-vsock
+# .. qmp-example::
+#    :title: Get vhost_virtqueue status for vhost-vsock
 #
 #     -> { "execute": "x-query-virtio-vhost-queue-status",
 #          "arguments": { "path": "/machine/peripheral/vsock0/virtio-backend",
@@ -839,9 +839,8 @@
 #
 # Since: 7.2
 #
-# Examples:
-#
-#     1. Introspect on virtio-net's VirtQueue 0 at index 5
+# .. qmp-example::
+#    :title: Introspect on virtio-net's VirtQueue 0 at index 5
 #
 #     -> { "execute": "x-query-virtio-queue-element",
 #          "arguments": { "path": 
"/machine/peripheral-anon/device[1]/virtio-backend",
@@ -870,7 +869,8 @@
 #          }
 #        }
 #
-#     2. Introspect on virtio-crypto's VirtQueue 1 at head
+# .. qmp-example::
+#    :title: Introspect on virtio-crypto's VirtQueue 1 at head
 #
 #     -> { "execute": "x-query-virtio-queue-element",
 #          "arguments": { "path": "/machine/peripheral/crypto0/virtio-backend",
@@ -898,7 +898,8 @@
 #          }
 #        }
 #
-#     3. Introspect on virtio-scsi's VirtQueue 2 at head
+# .. qmp-example::
+#    :title: Introspect on virtio-scsi's VirtQueue 2 at head
 #
 #     -> { "execute": "x-query-virtio-queue-element",
 #          "arguments": { "path": 
"/machine/peripheral-anon/device[2]/virtio-backend",
-- 
2.45.0