Re: [Qemu-devel] Problems with Prep IDE

[Tero Kaarlela]

>   Ok,
>
>      What I have made now:
>
>         1. Changed vendor id of PREP Pci bridge from 1011 to 1014 (ibm)
>         2.  Tried booting and noticed that Bootloader did: 
> pci_config_read: PCI Bridge address:10  value: 0xffffffff
>         3. Found out that address 10 should have base adress in it.
>         4. modified this with:
>
> >>                       d->config[0x10] = 0x08
> >>                       d->config[0x11] = 0x00
> >>                       d->config[0x12] = 0x00
> >>                       d->config[0x13] = 0xF0
>               to be 0xF0000008

Sorry about mistake in first...

>    Is this ok?(I just figured it out somehow)
>
>       Now bootloader gives me:
>
>        dma:command 0x24 not supported
>        dma:command 0x25 not supported
>
>   Just figuring out what these commands are....
>
>
> Tero
>
>
>
> _______________________________________________
> Qemu-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/qemu-devel