[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 5/6] isolate mmu code in arch-specific function
From: |
Glauber Costa |
Subject: |
Re: [Qemu-devel] [PATCH 5/6] isolate mmu code in arch-specific function |
Date: |
Tue, 27 May 2008 12:42:16 -0300 |
On Tue, May 27, 2008 at 12:30 PM, Fabrice Bellard <address@hidden> wrote:
> This is not the right solution for two reasons:
> - This part of the code is speed critical, so the function must be at least
> static inline.
> - The related code is never used.
>
> So just removing the piece of code is the right solution :-)
If it can really be safely removed, this sounds like the best solution
to me by far.
> Fabrice.
>
> Glauber Costa wrote:
>>
>> Simplify cpu_exec by removing a TARGET_I386 block, responsible
>> for conditionally resetting the mmu, and enclosing it inside
>> a function.
>> ---
>> cpu-exec.c | 17 +----------------
>> exec-all.h | 1 +
>> target-alpha/helper.c | 1 +
>> target-arm/helper.c | 1 +
>> target-cris/helper.c | 1 +
>> target-i386/helper.c | 19 +++++++++++++++++++
>> target-m68k/helper.c | 2 ++
>> target-mips/helper.c | 1 +
>> target-ppc/helper.c | 1 +
>> target-sh4/helper.c | 1 +
>> target-sparc/helper.c | 2 ++
>> 11 files changed, 31 insertions(+), 16 deletions(-)
>>
>> Index: qemu/cpu-exec.c
>> ===================================================================
>> --- qemu.orig/cpu-exec.c
>> +++ qemu/cpu-exec.c
>> @@ -432,15 +432,7 @@ int cpu_exec(CPUState *env1)
>> #endif
>> next_tb = tcg_qemu_tb_exec(tc_ptr);
>> env->current_tb = NULL;
>> - /* reset soft MMU for next block (it can currently
>> - only be set by a memory fault) */
>> -#if defined(TARGET_I386) && !defined(CONFIG_SOFTMMU)
>> - if (env->hflags & HF_SOFTMMU_MASK) {
>> - env->hflags &= ~HF_SOFTMMU_MASK;
>> - /* do not allow linking to another block */
>> - next_tb = 0;
>> - }
>> -#endif
>> + cpu_reset_mmu(env);
>> #if defined(USE_KQEMU)
>> #define MIN_CYCLE_BEFORE_SWITCH (100 * 1000)
>> if (kqemu_is_ok(env) &&
>> @@ -448,6 +440,7 @@ int cpu_exec(CPUState *env1)
>> cpu_loop_exit();
>> }
>> #endif
>> +
>> } /* for(;;) */
>> } else {
>> env_to_regs();
>> Index: qemu/exec-all.h
>> ===================================================================
>> --- qemu.orig/exec-all.h
>> +++ qemu/exec-all.h
>> @@ -93,6 +93,7 @@ void reset_tb(void);
>> void cpu_load_flags(CPUState *env);
>> void cpu_put_flags(CPUState *env);
>> +void cpu_reset_mmu(CPUState *env);
>> int page_unprotect(target_ulong address, unsigned long pc, void *puc);
>> void tb_invalidate_phys_page_range(target_phys_addr_t start,
>> target_phys_addr_t end,
>> Index: qemu/target-alpha/helper.c
>> ===================================================================
>> --- qemu.orig/target-alpha/helper.c
>> +++ qemu/target-alpha/helper.c
>> @@ -456,6 +456,7 @@ void cpu_dump_EA (target_ulong EA)
>> int cpu_info_ip(CPUState *env, char *buf) { return 0; }
>> void cpu_load_flags(CPUState *env) {}
>> void cpu_put_flags(CPUState *env) {}
>> +void cpu_reset_mmu(CPUState *env) {}
>> void arch_handle_interrupt_request(CPUState *env)
>> {
>> Index: qemu/target-arm/helper.c
>> ===================================================================
>> --- qemu.orig/target-arm/helper.c
>> +++ qemu/target-arm/helper.c
>> @@ -2527,6 +2527,7 @@ int cpu_info_ip(CPUState *env, char *buf
>> void cpu_load_flags(CPUState *env) { }
>> /* XXX: Save/restore host fpu exception state?. */
>> void cpu_put_flags(CPUState *env) { }
>> +void cpu_reset_mmu(CPUState *env) {}
>> void arch_handle_interrupt_request(CPUState *env)
>> {
>> Index: qemu/target-cris/helper.c
>> ===================================================================
>> --- qemu.orig/target-cris/helper.c
>> +++ qemu/target-cris/helper.c
>> @@ -187,6 +187,7 @@ target_phys_addr_t cpu_get_phys_page_deb
>> int cpu_info_ip(CPUState *env, char *buf) { return 0; }
>> void cpu_load_flags(CPUState *env) {}
>> void cpu_put_flags(CPUState *env) {}
>> +void cpu_reset_mmu(CPUState *env) {}
>> void arch_handle_interrupt_request(CPUState *env)
>> {
>> Index: qemu/target-i386/helper.c
>> ===================================================================
>> --- qemu.orig/target-i386/helper.c
>> +++ qemu/target-i386/helper.c
>> @@ -4755,6 +4755,18 @@ void cpu_put_flags(CPUState *env)
>> env->eflags = env->eflags | cc_table[CC_OP].compute_all() | (DF &
>> DF_MASK);
>> }
>> +void cpu_reset_mmu(CPUState *env)
>> +{
>> + /* reset soft MMU for next block (it can currently
>> + only be set by a memory fault) */
>> +#if !defined(CONFIG_SOFTMMU)
>> + if (env->hflags & HF_SOFTMMU_MASK) {
>> + env->hflags &= ~HF_SOFTMMU_MASK;
>> + /* do not allow linking to another block */
>> + reset_tb();
>> + }
>> +#endif
>> +}
>> #if defined(CONFIG_USER_ONLY)
>> void helper_vmrun(void) Index: qemu/target-m68k/helper.c
>> ===================================================================
>> --- qemu.orig/target-m68k/helper.c
>> +++ qemu/target-m68k/helper.c
>> @@ -355,6 +355,8 @@ void cpu_put_flags(CPUState *env)
>> | env->cc_dest | (env->cc_x << 4);
>> }
>> +void cpu_reset_mmu(CPUState *env) {}
>> +
>> void arch_handle_interrupt_request(CPUState *env)
>> {
>> if (env->interrupt_request & CPU_INTERRUPT_HARD
>> Index: qemu/target-mips/helper.c
>> ===================================================================
>> --- qemu.orig/target-mips/helper.c
>> +++ qemu/target-mips/helper.c
>> @@ -645,6 +645,7 @@ int cpu_info_ip(CPUState *env, char *buf
>> void cpu_put_flags(CPUState *env) { }
>> void cpu_load_flags(CPUState *env) { }
>> +void cpu_reset_mmu(CPUState *env) { }
>> void arch_handle_interrupt_request(CPUState *env)
>> {
>> Index: qemu/target-ppc/helper.c
>> ===================================================================
>> --- qemu.orig/target-ppc/helper.c
>> +++ qemu/target-ppc/helper.c
>> @@ -2997,6 +2997,7 @@ int cpu_info_ip(CPUState *env, char *buf
>> void cpu_load_flags(CPUState *env) { }
>> void cpu_put_flags(CPUState *env) { }
>> +void cpu_reset_mmu(CPUState *env) { }
>> void arch_handle_interrupt_request(CPUState *env)
>> {
>> Index: qemu/target-sh4/helper.c
>> ===================================================================
>> --- qemu.orig/target-sh4/helper.c
>> +++ qemu/target-sh4/helper.c
>> @@ -538,6 +538,7 @@ void cpu_load_tlb(CPUState * env)
>> int cpu_info_ip(CPUState *env, char *buf) { return 0; }
>> void cpu_load_flags(CPUState *env) {}
>> void cpu_put_flags(CPUState *env) {}
>> +void cpu_reset_mmu(CPUState *env) {}
>> void arch_handle_interrupt_request(CPUState *env)
>> {
>> Index: qemu/target-sparc/helper.c
>> ===================================================================
>> --- qemu.orig/target-sparc/helper.c
>> +++ qemu/target-sparc/helper.c
>> @@ -1340,6 +1340,8 @@ void cpu_put_flags(CPUState *env)
>> #endif
>> }
>> +void cpu_reset_mmu(CPUState *env) {}
>> +
>> #ifdef TARGET_SPARC64
>> #if !defined(CONFIG_USER_ONLY)
>> #include "qemu-common.h"
>>
>>
>>
>
>
>
>
--
Glauber Costa.
"Free as in Freedom"
http://glommer.net
"The less confident you are, the more serious you have to act."
- [Qemu-devel] [PATCH 0/6] simplify cpu-exec new spin, Glauber Costa, 2008/05/27
- [Qemu-devel] [PATCH 1/6] simplify cpu_exec, Glauber Costa, 2008/05/27
- [Qemu-devel] [PATCH 2/6] Push common interrupt variables to cpu-defs.h, Glauber Costa, 2008/05/27
- [Qemu-devel] [PATCH 3/6] use halted attribute for i386 too., Glauber Costa, 2008/05/27
- [Qemu-devel] [PATCH 4/6] simply cpu_exec further, Glauber Costa, 2008/05/27
- [Qemu-devel] [PATCH 5/6] isolate mmu code in arch-specific function, Glauber Costa, 2008/05/27
- [Qemu-devel] [PATCH 6/6] cpu-exec-dump, Glauber Costa, 2008/05/27
- Re: [Qemu-devel] [PATCH 6/6] cpu-exec-dump, Paul Brook, 2008/05/27
- Re: [Qemu-devel] [PATCH 5/6] isolate mmu code in arch-specific function, Fabrice Bellard, 2008/05/27
- Re: [Qemu-devel] [PATCH 5/6] isolate mmu code in arch-specific function,
Glauber Costa <=
- Re: [Qemu-devel] [PATCH 5/6] isolate mmu code in arch-specific function, Paul Brook, 2008/05/27
- Re: [Qemu-devel] [PATCH 4/6] simply cpu_exec further, Blue Swirl, 2008/05/27
- Re: [Qemu-devel] [PATCH 4/6] simply cpu_exec further, Glauber Costa, 2008/05/27
- Re: [Qemu-devel] [PATCH 3/6] use halted attribute for i386 too., Fabrice Bellard, 2008/05/27
- Re: [Qemu-devel] [PATCH 3/6] use halted attribute for i386 too., Blue Swirl, 2008/05/27
- Re: [Qemu-devel] [PATCH 3/6] use halted attribute for i386 too., Glauber Costa, 2008/05/27
- Re: [Qemu-devel] [PATCH 3/6] use halted attribute for i386 too., Glauber Costa, 2008/05/27
- Re: [Qemu-devel] [PATCH 3/6] use halted attribute for i386 too., Fabrice Bellard, 2008/05/27
- Re: [Qemu-devel] [PATCH 2/6] Push common interrupt variables to cpu-defs.h, Fabrice Bellard, 2008/05/27
Re: [Qemu-devel] [PATCH 1/6] simplify cpu_exec, Paul Brook, 2008/05/27